HiLetgo 5pcs Nano I/O Expansion Sensor Shield for Arduino UNO R1 Nano 3.0 Duemilanove 2009
- 14 I/O Pin (servo type with GND, power and signal).
Best Servo To Pwm Converter Board
Treedix 2pcs ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter
- The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
- This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
- This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
- Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
- simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
- We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
Treedix ATmega328P CH340 Development Board Compatible with Arduino UNO R3 Board Kit for Starter with Cable
- The board is a microcontroller board based on the CH340. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button..
- This is compatible board with an Atmega328p and a CH340G serial converter, 100% Compatible with Arduino UNO R3..
- This board has the following new features: 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. Stronger RESET circuit..
- Friendly: the board is easy to use for Arduino starter, It contains everything needed to support the microcontroller.
- simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started..
- We strive to put our hundred percent to meet your requirements and try our best to achieve your satisfaction!.
Analog Voltage to PWM Signal Converter, 0-5V/0-10V Analog Input Voltage to 0-100% PWM Signal 2KHZ-20KHZ Converter Module,for PWM Motor Speed Control Interface Circuit Activity
- Voltage to PWM Signal Converter Module: This module can convert 0-5V or 0-10V analog input voltage into 0-100% PWM signal..
- Wide Application: This module is widely used for PWM motor speed control interface circuit, instrumentation AD interface conversion, and other applications that need convert voltage to PWM signal..
- PWM Signal Frequency Range: The PWM signal frequency range is 2KHZ-20KHZ, maximum is 20KHZ, default minimum is 2KHZ,Hyuduo is committed to providing customers with high-quality products and thoughtful service..
- Setable Output Frequency: The default function of this module is converting 0-10V into 0-100% 2KHZ PWM signal, but the output frequency can be set by adjusting potentiometer as needed,stable and reliable performance, practical, easy to operate and use, has a long service life..
- Two Kinds of PWM Signal: There are two kinds of PWM signal, PNP-PWM output and NPN-PWM output. The PNP-PWM output is only 5V level, NPN-PWM output is 5V and 24V level,If you have any problem,please contact us, we will strive to provide you with satisfactory service!.
QWinOut 8CH Receiver PWM to PPM Sbus Dbus S-Bus Encoder Signal Converter Module Compatible for DJI Phantom 2 Xaircraft Minix Superx V2
- Effective Picture Only, Product Do Not Include The Receiver!.
- With This Signal Converter, You Can Be in Average ELF With Ordinary Remote Receiver and Remote Control, and Don't Have to Use Average of Original Remote Control.
- With This Signal Converter, You Can Put The Average ELF Remote Control Used in The Ordinary Plane (ELF SBUS For The Remote Control Receiver Signal is Converted Into Common PWM Signal Available To Ordinary Electric Harmonic Steering Gear).
- With This Signal Converter, You Can Put The Ordinary Ppm Signal Of The Remote Control Interface (Coach) Into PMW Signal (The Equivalent of a Cable Receiver, Converted To Ordinary PWM Signal Available to Ordinary Electric Harmonic Steering Gear).
- Compatibility: compatible for DJI S.Bus Flight Control and Gimbal, Xaircraft Minix or Superx V2.
AEDIKO MG996R Servo Motor Control 180 Angle Metal Gear Servo Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter 2-Pack (MG996)
- Positioning Speed Without Load: 0.17s / 60 degrees 4.8V.
- Compliant with Futaba, Hitec, Sanwa, GWS, etc ..
- Latest Version: MG996R Servo Motor Which Updated from SG90 and MG90S Micro Servo Motor,Made of High Precision Potentiometer and High Resolution Digital Chip to Ensure Stable Performance and Solve Problems:Unsuitable R / C and Slow Response Time.
- Gear Type: All Metal Gear RC Servo Can Control the Angle Range from 0 to 180, with Precise Control and Gears are Consistent,Which Can Rotate 360 Degrees When Power Off.
- Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys and Arduino Experiments.
15 Pieces Servo Extension Cables Servo Extension Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car Airplanes (3.9 Inch,5.9 Inch,11.8 Inch,19.7 Inch,23.6 Inch)
- Wide application: these servo extension s are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
- Appropriate sizes: the servo extension cord measures approx. 3.9 Inch, 5.9 Inch, 11.8 Inch, 19.7 Inch, 23.6 Inch in length, different size for your use, the color is black and red.
- Package includes: this package includes 15 pieces of male to female servo extension cables, enough quantity for you to use and replacement, providing more convenience for you.
- Feature: this male to female servo extension cord featured with female connector on one side, and male connector on the other side, can be connected to the receiving set and steering engine.
- Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control, which is male to female.
PC Interface Controller
- 【One-year after-sale warranty】The PWM to voltage module converts PWM digital signals to 0 to 10V analog signals. It can be used to switch the signal interface of PLC or other industrial control board. Adjust the output voltage by adjusting the PWM duty cycle. The module is small in size and easy to apply in different places.003cbr003e.
- Using MCU embedded technology. Easy to operate, can be fine-tuned by potentiometer.003cbr003e.
- Select the PWM signal input level range by short circuit. The module is small, easy to carry and easy to use.003cbr003e.
- (current greater than 100mA)，PWM signal receiving frequency range: 1KHZ-3KHZ.
- When power on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to PWM and GND. Jumper caps set the corresponding voltage range. When the frequency is 1KHZ-3KHZ, use a multimeter to measure the two ports of VOUT and GND. At this time, the meter displays about 5V. Adjust the potentiometer on the board so that the multimeter displays 5.00v.003cbr003e.
AEDIKO MG995 Servo Motor Control 180 Angle Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter 2-Pack (MG995)
- Positioning Speed Without Load: 0.17s / 60 degrees 4.8V.
- Compliant with Futaba, Hitec, Sanwa, GWS, etc ..
- Latest Version: Micro Servo Made of High Precision Potentiometer and High Resolution Digital Chip to Ensure Stable Performance and Solve Problems:Unsuitable R / C and Slow Response Time.
- Gear Type: All Metal Gear RC Servo Can Control the Angle Range from 0 to 180, with Precise Control and Gears are Consistent,Which Can Rotate 360 Degrees When Power Off.
- Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys.