Best Serial Development Board

RedTagCanada SIM900 Quad Band GSM GPRS Quad-Band Modules 2G Shield Development Board for R3 Mega with Antenna for Arduino SCM & DIY Kits

  • ...ld also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present on board..
  • Application: M2M (Machine 2 Machine) Applications.Remote control of appliances.Remote Weather Station or Wireless Sensor Network.Vehicle tracking system with a GPS module.Good to learn GSM / GPRS mobile phone development, control development of remote equipment, wireless meter reading, smart appliances, ultra long distance control, etc..
  • Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced.
  • Power jack - connected to external 4.8~5VDC power supply, Antenna interface - connected to external antenna, Serial port select - select either software serial port or hardware serial port to be connected to GPRS Shield.
Check Stock

ESP8266 ESP-12E NodeMcu Lua WiFi Module Connector Development Board, for Arduino IDE Micropython

  • ESP8266 CP2102 NodeMCU ESP-12E WIFI serial wireless module is an open source Lua based firmware, ultra low cost WI-FI modules, development boards for rapid prototyping, integrated with ESP8266 WIFI chips..
  • Use interactive Lua scripts to write hardware code for Arduino, it offers a complete and self-contained Wi-Fi networking solution..
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIO..
  • The NodeMCU ESP8266 development board programming model is similar to that of Node.js, more open source and interactive, programmable, simple, 4-layer PCB design, small size..
  • The has integrating GPIO, PWM, IIC, 1-Wire and ADC all in one board, without having to press the flash and reset buttons before each flash operation,simultaneity support smart link smart networking..
Check Stock

AITRIP 10PCS ESP8266 NodeMCU LUA CH340 ESP-12E WiFi Internet Development Board 4M Flash Serial Wireless Module for Arduino IDE/Micropython

  • ESP8266 CH340 CH340G NodeMCU LUA ESP-12E WIFI Serial Wireless Module.
  • Built-in Micro-USB, with flash and reset switches, easy to program.
  • Compatible with Arduino IDE/Mongoose IoT/Micropython.
  • ESP8266 CH340 chip, power your development in the fastest way combinating with NodeMcu Firmware.
  • It's a IOT unit with all available resources on board, support smart link and smart networking..
  • ESP8266 has powerful on-board processing and storage capabilities that allow it to be integrated with the sensors and other application specific devices through its GPIOs with minimal development up-front and minimal loading during runtime. Its high degree of on-chip integration allows for minimal external circuitry, and the entire solution, including front-end module, is designed to occupy minimal PCB area..
Check Stock

Orange Pi Pc Plus RAM 1G AllWinner H3 Quad Core Open Source Development Board Desktop with 8GB Emmc Flash, Run Android Ubuntu Debian Single Board Computer (PC Plus)

  • ...d other interfaces, and supports HDMI, AVOUT video output and other functions. Note: Our shipping time generally takes 15 days, Not as long as Amazon suggests..
  • Orange Pi PC Plus RAM 1G with 8GB Emmc Flash ,Mini Open-Source Single Board,Support 100M Ethernet Port/Wifi/Camera/Hdmi/IR/MIC.
  • Orange Pi PC Plus open source development board references quite rich interfaces, including HDMI, Ethernet, USB-Host, USB-OTG, DVP camera, etc. And it integrates on-board network, on-board storage, LED indicator, and our development board is compatible with Raspberry Pi GPIO port, has a unique debugging serial port, etc..
  • Memory (SDRAM): 1GB DDR3 (shared with GPU). Onboard Storage: TF card (Max. 32GB) / MMC card slot, 8GB EMMC Flash.
  • Three USB 2.0 HOST, one USB 2.0 OTG, 40 Pins Header, Camera Interfacce, HDMI, MIC, IR Receiver.
  • Orange Pi Single Board Computers can builed a computer, a wireless server, Games, music and sounds, HD video, a speaker, Android, Scratch.Pretty much anything else, because Orange Pi is open source..
  • Notice before order: By default, we won't responsible for customs clearance fee charged by your local. If you have any questions, pls contact with Amazon service..
Check Stock

KEYESTUDIO Leonardo R3 Microcontroller Development Board with USB Cable Kit for Arduino Project

  • Please NOTE: Open the Arduino IDE, you’ll need to click the “Tools”, then select the Board that corresponds to your Arduino. If you don't choose the correct development board type, it will cause the compilation to fail to transfer. So this is a place that needs special attention..
  • The keyestudio Leonardo is a microcontroller board based on the ATmega32u4，It has 20 digital input/output pins (of which 7 can be used as PWM outputs), 12 analog inputs, a 16 MHz crystal oscillator, a micro USB connection, a power jack, an ICSP header, and a reset button..
  • The Leonardo differs from other boards using separate USB-Serial chip in that the ATmega32u4 has built-in USB communication, eliminating the need for a secondary processor..
  • This allows the Leonardo to appear to a connected computer as a mouse and keyboard..
  • Has fcc and ce certification that they are made from environmentally friendly production technology and materials, made function,voltage, current testing before packaging.
Check Stock

SparkFun FTDI Basic Breakout - 3.3V Development Tool with USB Mini-B Connector Save Space and Money in Your DIY Electronics Projects Pinout of This Board Matches The FTDI Cable

  • Save space by using this genuine FTDI FT232RL USB to serial IC breakout to program your microcontroller.
  • Has TX and RX LEDs that allow you to see serial traffic on the LEDs to verify the board is working.
  • Designed to decrease the cost of (Arduino-compatible) development and increase ease of use. Includes auto-reset feature.
  • The pins labeled BLK and GRN correspond to the black wire on the FTDI cable that is GND, green is DTR.
  • Uses a SMD 6-pin header on the bottom, which makes it smaller and more compact.
Check Stock

Waveshare Compute Module IO Board Plus Development Composite Breakout Board for Developing with Raspberry Pi CM3 CM3L Various Common Use Components

  • The Compute Module IO Board Plus is a development board which you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. It is compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation, along with various common use components..
  • Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
  • connectivity, also supports shields 1-WIRE interface, for connecting single-bus devices like DS18B20 4x keys, 4x LEDs, 1x Buzzer, for I/O testing.
  • Onboard USB HUB, allows connecting more USB devices IR receiver, IR remote control is available Onboard USB TO UART, for serial debugging Sensor interface.
  • 10-bit ADC, 38KSPS, 11-ch (6-ch for interface, 5-ch for sensors) 16-bit DAC, 2-ch Onboard RTC, one of the most common and useful functions.
Check Stock

Stemedu ESP8266 Test Board Code Burner Flash Downloader ESP8266 ESP-01S Serial WiFi Wireless Transceiver Module for Fixture Board (Pack of 5pcs)

  • Video tutorial: https://youtu(dot)be/oLtgUKrG6wM, ESP8266 Flash Downloader with ESP-01S Serial Module https://youtu(dot)be/gmluzujXw78.
  • All IO ports have been drawn out and can be used as ZUI small system development board or small batch burning fixture. The board supports one-click firmware download function, and add burning.
  • Compatible with ESP-01S ESP-07 ESP-07S ESP-12E ESP-12F ESP-12S ▶ Micro USB interface, this module is very easy to program..
  • The board supports one-click firmware download function, and add burning.
  • If any question, how to email us? Please click "Stemedu" (you can find "Sold by Stemedu" under Buy Now button), in the new page, click "Ask a question" to email us.
Check Stock

Orange Pi Zero 512MB SDRAM AllWinner H3 Quad Core, Open-Source, Android 4.4, Ubuntu, Debian, Single Board Computer (Zero 512+White case+OTG Power Supply)

  • Orange Pi Zero uses Allwinner quad-core A7 high-performance processor Allwinner H3, integrated Ethernet, 100M onboard network port, onboard storage, USB OTG power supply, USB2.0 port, etc. Note: Our shipping time generally takes 15 days, Not as long as Amazon suggests..
  • Orange Pi Zero open source development board integrates on-board network, on-board storage, LED indicators, low-level peripherals, and is compatible with Raspberry Pi GPIO ports, and has a unique debugging serial port, etc..
  • 512MB DDR3, Onboard Network. One USB 2.0 HOST, one USB 2.0 OTG USB OTG can supply power.
  • Include: Orange Pi Zero 512 Single Board Computer+White Case+OTG Power Supply.
  • Orange Pi Single Board Computers can builed a computer, a wireless server, Games, music and sounds, HD video, a speaker, Android, Scratch.Pretty much anything else, because Orange Pi is open source..
  • Notice before order: By default, we won't responsible for customs clearance fee charged by your local. If you have any questions, pls contact with Amazon servic.
Check Stock