Best Sell Oil Filter

OEMTOOLS 25101 3-Jaw Adjustable Magnetic Oil Filter Wrench, Oil Filter Wrench Small, Oil Filter Wrench Adjustable, Black and Green

  • APPLICATIONS GALORE: This adjustable oil filter wrench removes oil filters on many domestic and foreign light trucks and passenger vehicles, as well as motorcycles and lawnmowers.
  • EXTRA GRIP: Our oil filter puller includes a magnetic base attachment that keeps the oil filter remover securely in place while you remove filter caps.
  • VERSATILE: This auto adjustable oil filter wrench fits filter sizes between 2.4 to 3.6 inches (60MM to 93MM).
  • HOLD ON TIGHT: Our adjustable filter wrench features spring-loaded jaws for a more secure grip than the average oil filter claw wrench.
  • DON'T GET STUCK: Working in tight areas is hard enough without stuck on filters.
  • This compact adjustable oil filter removal tool removes tough filters in tight spaces.
Check Stock

ATLIN 36mm Oil Filter Socket - Fits Some Ford F250, BMW, Mini, Volvo, Audi, VW, Porsche Vehicles

  • Compatibility – This low profile oil filter socket is designed to fit vehicles equipped with a cartridge style oil filter housing. Compatible vehicles Include: Ford F250 6.0, F250 6.4, various BMW, Mini, Volvo, Audi, VW, Porsche vehicles. Also can function as a fuel filter socket, compatible with some Duramax engines.
  • Low Profile For Confined Spaces – Fuel filter and oil filter caps are often located in areas with little clearance. Designed with a height of just 1.25”, the ATLIN oil filter wrench effortlessly reaches oil filter cartridges on even the most compact of vehicles.
  • Superior Design – The 6-point hex features rounded corners to prevent rounding-off the filter canister. This design allows the 36mm wrench to grip the filter cartridge tightly with the 6 flat sides instead of the corners, preventing binding and resulting in a more secure fit.
  • Built To Last – The ATLIN oil filter cap wrench is crafted from solid chrome-vanadium (CR-V) steel. This 36mm oil filter socket will not yield under high torque applications like a cheaper cast aluminum 36mm socket.
  • Size & Materials – 3/8-inch drive, 6-point hex, 36-millimeter, CR-V steel.
Check Stock

Genuine OEM Lexus Toyota 04152-Yzza1 Oil Filters + Drain Plug Gaskets - Set Of 5

  • Material: Oil Filter is a microporous filter paper treated with high-quality resin, Oil Drain Plug Gaskets Made of High Quality & Durable Material..
  • Oil Drain Plug Gaskets Specification: 12mm Inside Diameter X 21mm Outside Diameter X 1.78mm Thick, quality replacement crush washers designed for a solid seal.
  • Function of the oil filter is to filter out harmful impurities in the oil from the oil pan, and supply the crankshaft, connecting rod, camshaft, supercharger, piston ring, and other motion pairs with clean oil to provide lubrication, cooling, Cleaning effect, thereby extending the life of these parts..
  • Oil Filter Manufacturer Part Number: 04152-YZZA1, 04152-31090.
  • Oil Drain Plug Gaskets REPLACES PART # 90430-12031 90430-12028 095-156 65394.
  • Fitment: Replace Oil Filter and Oil Drain Plug Gaskets of Toyota Avalon Camry RAV4 Sienna Lexus ES300h ES350 IS200t RX350 RX450h.
Check Stock

36mm Oil Filter Socket Fits BMW, Ford, Mercedes, Mini, VW, Audi, Volvo, Porsche Vehicles and All With 36mm Oil Filter Caps, Heavy Duty Oil Filter Wrench 3/8' Drive 6-Point Oil Filter Removal Tool

  • High Quality: A ABIGAIL oil filter wrenches are made from super durable chrome vanadium steel, which can bear tremendous pressure when you unscrew the extremely tight oil filter caps. and the surface is treated with a finished matte chrome to prevent corrosion..
  • Application: This low profile oil filter socket is designed to fit vehicles equipped with a cartridge-style oil filter housing. Compatible with Ford F250 6.0, F250 6.4, various BMW, Mini, Volvo, Audi, VW, Porsche vehicles. Also can function as a fuel filter socket, compatible with some Duramax engines..
  • Low Profile Design: The oil filter socket is slim and thin which allows easier access to confined spaces. And the special 6-points hex wall holds securely on the oil filter without slippage..
  • Function: 36mm oil filter removal tool features 6-point hex to prevent rounding-off the filter canister. The 6 flat sides allow the oil filter wrench to grip the filter cartridge tightly and prevents binding..
  • Service: 100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

XtremepowerUS 2-1/2 to 4 Two Way 3 Leg Oil Filter Wrench Remover

  • Wide Application - The oil filter wrench can be adjust to remover the filters from 2-1/2 inch to 4 inch filters. Fits 1/2 and 3/8 inch square drive....
  • Special Design - The oil filter wrench is specially designed with three jaws. These three jaws will catch the filter more tightly..
  • Function Type -The oil filter wrench is a universal tool to remove the filters on your vehicles. Sometimes the filters are very tough. Then you need a....
  • High Quality - The oil filter wrench is made of 45# carbon steel. This kind of material is much stronger than the normal materials. With the shinning....
  • Easy to use - This Oil Filter Wrench is used to remove the oil filter from cars and trucks. It is adjustable simply adjust it on the filter by turning....
Check Stock

Oil Pressure Switch Filter Fit for Chevy GMC Cadillac Buick Pontiac Engine Valve Lifter Oil Filter Suitable for AFM Fuel Supply Assembly

  • This part is made from quality materials to ensure reliable performance and long service life. This engine oil pressure sensor filter is designed to....
  • Reliable replacement for an original part that has failed due to clogging.This engine oil pressure sensor filter is designed to match the fit and....
  • The primary purpose of this filter is to clean oil that flows into the AFM lifters. Putting it on the AFM oil supply assembly can also protect the oil....
  • Always replace your oil and main engine oil filter when you change this filter. Please check this AFM filter at each oil change until you understand....
  • Getting to the filter housing was a bit of a challenge, but once you got the old filter out, you could see why the truck was running so rough. After....
Check Stock

Stainless Steel Oiler with Strainer, Bacon Grease Container with Strainer and Spout, Reusable Stainless Steel Oiler for Bacon Grease, 304 Stainless Steel Oil Strainer Pot for Kitchen (24 oz)

  • Stainless Steel Oil Filter Pot with Strainer: The oil filter pot is dual-purpose, stainless steel oiler can be used to store oil, and it can also filter to separate grease from food, bacon fat container can also be used for teapots or kettles..
  • High Quality Material: This stainless steel oil filter pot with removable strainer and brush, stainless steel oil strainer is made of food grade stainless steel, which is durable. With cover, effectively isolate dust. 18/24/32/48/70oz 5 types capacity oil tanks are available..
  • Effective Filtration and Storage: The oil pot with oil filter is used to quickly filter oil and oil residue, which is convenient and simple, and can be used to pour hot grease into the grease tank at any time and store it for later use. Help us solve the problem of reuse of edible oil..
  • Thoughtful Design: Ergonomic easy-grip handle. Stainless steel fine mesh filter makes filtering better. The small oil filling port on the edge is designed to make the oil filling process faster and prevent oil leakage. Stainless steel base effectively prevents slipping. Avoid running oil on the countertop. The kitchen is clean and tidy..
  • Multifunctional Kitchen Container: Bacon grease container is very suitable as oil and vinegar dispenser, olive oil bottle, ....
Check Stock

Heavy Duty Oil Filter Wrench For Toyota, Lexus, Scion 1.8 Liter Engines - Durable Cup Style Oil Filter Removal Socket Tool Fits Prius, Prius V, Corolla, Matrix, CT200h, iM, iQ, xD

  • PERFECT FIT FOR 1.8L ENGINES WITH CARTRIDGE STYLE OIL FILTER SYSTEMS – This 64mm 14 flute oil filter wrench fits for Toyota, Lexus, and Scion vehicles equipped with a 1.8L 4-cylinder engine that uses the newer cartridge style oil filter system. This tool does not work on vehicles with traditional canister filters that you unscrew and throw away..
  • BUILT TOUGH TO REMOVE OVERTIGHTENED OIL FILTER HOUSINGS WITHOUT BREAKING - Oil filter housing caps can be extremely tightened causing tremendous pressure to be put on the wrench. Our oil filter wrenches are forged from high quality 6065 aluminum alloy, so they won't crack like cheaper cast aluminum or flex and damage the plastic cap like stamped steel versions..
  • WON'T DAMAGE YOUR OIL FILTER HOUSING CAP BY SLIPPING - Our oil filter wrenches are perfectly sized with added contact area to allow for easy installation and a fit that won't slip..
  • EASILY RELEASES FROM THE CAP WITHOUT GETTING STUCK – Some oil filter wrenches are very difficult to release from the cap requiring additional time and frustration of prying it off. Ours are constructed and finished in a way that eliminates t....
Check Stock

Sinister Diesel Oil Filter & Coolant Filtration System For FORD POWERSTROKE 2003-2007 6.0L Diesel with All Hardware - No Drilling Or Part Removal Required - Easy Installation

  • PROLONG ENGINE & OIL LIFE: Using Sinister Diesel Oil Filter & Coolant Filtration System you can prolong the life expectancy of your oil and engine. As time passes, the oil starts losing its quality due to contaminants coupled with dirty coolant that causes significant damage to your engine. Our Coolant Filtration System for Oil Filter & Coolant Filtration System minimizes contaminants in oil and filter coolant to increase the lifespan of your engine..
  • FOR FORD POWERSTROKE 2003-2007: This Coolant Filtration System Kit and oil filter kit is made specifically for FORD POWERSTROKE models between 2003-2007 to provide a precise installation without having to remove any engine parts or drill any new holes.
  • PREMIUM GRADE CONSTRUCTION: To provide the finest oil filtration kit and coolant filtration kit we used the finest quality CNC machined billet 6061 aluminum to ensure long-term use to reliably bypass and filter small amounts of contaminants in the oil and coolant while to increase 6.0L Diesel engine lifespan..
  • EASY INSTALLATION: Sinister Diesel Water Coolant & Oil Filter Bypass System for FORD POWERSTROKE comes with everything you need right out the box so that you can install it easily. This Water coolant filtration kit includes 1) Amsoil 2 Micron Oil ....
Check Stock