Best Second Cell Cylinder Type

X-PRO Long Case 150cc 4-stroke GY6 Air cooled Moped Scooter Engine with CVT Automatic Transmission, Electric/Kick Start…

【Parameters】Engine type: Gy6 single-cylinder four-stroke, engine oil type: Sf15w-40 without oil, carburetor type: pd24j, carburetor type: horizontal vacuum carburetor, spark plug type: a7tc, ignition type: cfw, cooling: air cooling, oil number: >=87#, compression ratio: 9.2:1, clutch: shoe type automatic centrifugal dry clutch, transmission: cvt, ignition system: Cdi, starting method: electric/kick.
【Specification】 Displacement: 150cc, maximum power (Kw/R/Min): 6kw/7500r/Min, rated power (Kw/R/Min): 5.2kw/7000r/Min, maximum torque (Nm/R/Min) : 7.6nm/6500r/Min, minute steady idle speed 1600±150r/Min, piston diameter: 57.4mm, piston stroke: 57.8mm, bore and stroke 2.26" X 2.28" (57.4mm X 57.8mm), lubrication capacity: 0.26 gallons (1200ml), cylinder working volume: 0.03 gallons (149.6ml), speed: 8 poles.
【Features】 Large-flow oil pump: reduce friction pair wear and prolong engine service life.
aluminum cylinder head and cylinder block: improve heat dissipation, reduce weight, and increase engine torque.
crankshaft: engine low-speed high torque, crankshaft connecting rod adopts large diameter bearing, Increase the reliability of the bearing.
lubricating oil filter: help to remove solid pollutants in the lubricating oil, greatly reduce the wea....

This kit includes six-shot cylinder, cylinder pin & screws, hammer, trigger, replacement plunger seal, and 8kg spring..
When installed, the Hammershot shoots at 80-90 FPS (feet per second)..
Mod at your own risk! Increasing the spring tension can break or damage stock internal components of your blaster..

901901 Piston Bumper fit for Porter Cable FR350 FC350..
This part acts as a cushion when the piston/driver retracts back into the cylinder after being fired..
This Piston Bumper is located Cylinder Cap of nail guns..
Fit For FC350 Type 1, FC350 Type 2, FC350 Type 3, Fit For FR350 Type 1, FR350 Type 2, FR350 Type 3, Does NOT WORK for the FR350A model..

Compatible with FC350 Clipped Head Framing Nailer Kit,FC350 Type 1 Framing Nailer Clip,FC350 Type 2 Framing Nailer Clip,FC350 Type 3 Framing Nailer Clip.
Compatible with FR350 Round Head Framing Nailer Kit, FR350 Type 1 Framing Nailer Round, FR350 Type 2 Framing Nailer Round,FR350 Type 3 Framing Nailer Round.
This Part Acts as a Cushion When The Piston/Driver Retracts Back Into The Cylinder After Being Fired.This Piston Bumper is Located Cylinder Cap of Nail Guns..
Warning:It does not fit FR350 MAG Type 1 nailers!!!.

Press the screen and hold for one second to display the time on demand.
Fits wrists from 6.3" - 8.3" (16 - 21 cm) in circumference.
The way to set time please refer to our product description.
3ATM water resistant (This level will easily withstand splashes or brief immersion in water, or getting caught in the rain. However, it is not sufficiently resistant for swimming or bathing).

Newly added Auto Closure Device (ACD) - keeps corrosive water out of the first stage inlet by automatically closing as the Core is removed from the cylinder valve. Prevents internal lubrication from washing away. Safer for elevated percentages of oxygen..
Compact dimensions and low weight blend comfort with a unique diving experience. A braided hose, weighing less than 5 oz., provides flexibility, comfort and excellent transportability.
The first stage is a balanced diaphragm type that sports 2 HP ports (7/16) and 4 MP ports (3/8).
Pneumatically-balanced second stage allows for smooth, easy breathing. Has an adjustment knob to optimize opening effort. In the “Mini” position, the opening effort is increased, ideal for avoiding free flows at the surface. In the “Maxi” position, the inhalation effort is lowered, reducing the work of breathing..
Equipped with Aqua Lung’s Comfo-Bite mouthpiece with a reusable mouthpiece clamp. It is supplied with a smaller Comfo-Bite mouthpiece designed for smaller mouths, and a detachable silicone bridge which fits across the upper palate.

Edelbrock's R&D staff is not only well qualified at their respective positions, but they're also automotive enthusiasts who do more than work in the automotive aftermarket - they live it - and it's at that point where understanding the inner workings of a supercharger, or an engine, EFI system becomes second nature..
Whether they're manifolds, superchargers, fuel injection systems, cylinder heads, nitrous systems, or carburetors, you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team..
Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment..
In a day and age where we are seeing more products sent overseas to be manufactured, Edelbrock sees value in the quality control of American manufacturing by American workers and we are proud of our casting and manufacturing facilities..
Edelbrock facilities have earned the world recognized ISO 9001: 2008 registration for quality..Fit type: Vehicle Specific.

Edelbrock's R&D staff is not only well qualified at their respective positions, but they're also automotive enthusiasts who do more than work in the automotive aftermarket-they live it-and it's at that point where understanding the inner workings of a supercharger, or an engine, EFI system becomes second nature..
Whether they're manifolds, superchargers, fuel injection systems, cylinder heads, nitrous systems, or carburetors, you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team..
Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment..
In a day and age where we are seeing more products sent overseas to be manufactured, Edelbrock sees value in the quality control of American manufacturing by American workers and we are proud of our casting and manufacturing facilities..
Edelbrock facilities have earned the world recognized ISO 9001: 2008 registration for quality..

Edelbrock's R&D staff is not only well qualified at their respective positions, but they're also automotive enthusiasts who do more than work in the automotive aftermarket-they live it-and it's at that point where understanding the inner workings of a supercharger, or an engine, EFI system becomes second nature..
Whether they're manifolds, superchargers, fuel injection systems, cylinder heads, nitrous systems, or carburetors, you can rest assured that the final product was directly influenced by the passion for performance that is an integral part of our Edelbrock team..
Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment..
In a day and age where we are seeing more products sent overseas to be manufactured, Edelbrock sees value in the quality control of American manufacturing by American workers and we are proud of our casting and manufacturing facilities..
Edelbrock facilities have earned the world recognized ISO 9001: 2008 registration for quality..