Best Screw Mandrel

TEMO 100 pc 1/4 Inch Sand Drum Grit 60 Coarse with 2 pc 1/8 Inch Mandrel Compatible for Dremel Rotary Tools

100 PC 1/4" (6.35mm) sand drum with 2 Mandrel Compatible for dremel grit 60 coarse.
100 piece 1/4" (6.35mm) 60 Grit, 1/4" (6.35mm) Diameter.
2 piece 1/4" (6.35mm) X 1/2" (12.7mm) Rubber Mandrels.
1/8" (3.175mm) shank size (Compatible for Dremel and other Rotary Tools).
Here are our best practices for using sand drums. 1. Adjusting the screw at the top of the mandrel will loosen or tighten the sand drum. Make sure the sand drum is held tight to the mandrel before use. 2. During use, periodically power down the rotary tool to check the sand drum. Ensure that there is sufficient grit remaining on the band before continuing..
3. Rotary tools can operate at very high RPM. High RPM with a small tool such as a sanding drum produces a lot of friction and heat build up. Ensure that your sand drum and mandrel is not getting too hot. Consider using medium speed and alternating mandrels as you change sand drums out to reduce heat build up.003cbr003e4. Rotary tools are power tools. Always consider appropriate eyewear and other PPE to suit your task..
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..

Check Stock

Marathon 8\ Felt Polishing Wheel, 1\ Thick, 5/8\ Arbor Hole, Hard Density

The set includes 100 pc 429 Felt Polishing 1" (25.4mm) (Diameter) x 1/4" (6.35mm)(thick) Wheel with 2 pc 1/8" (3.175mm) shank screw mandrel 401.
Rotary tool accessories, felt-tipped, made of top quality wool, Compatible for Dremel..
Smooth and refine surfaces by using these felt buffs to polish or grind metal, ceramics and glass..
Ideal for smoothing interior surfaces. | All with 1/8" (3.175mm) Mandrel.
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..

Check Stock

Dremel 709-02 110-Piece All-Purpose Rotary Tool Accessory Kit- Includes a Carving Bit, Sanding Drums, Grinding Stones, Cutting Discs, and a Storage Case , Gray

...s: 409 15/16” Thin-Cut, cut-off wheel (x12), 420 15/16” Cut-off wheel (x12), 426 1-1/4” Fiberglass-reinforced cut-off wheel (x1), 540 1-1/4” Cut off wheel (x1).
Cleaning & Polishing: 414 ¼” Felt polishing wheel (x4), 421 Polishing Compound (x1), 429 1” Felt polishing wheel (x4).
Sanding: 407 ½” Band & Mandrel (1), 408 ½” Band (6), 432 1/2” Band (6), 430 1/4” Sanding Band & Mandrel (1), 438 1/4” Sanding Band (5), 411 3/4” Sanding Discs (4), 412 3/4” Sanding Discs (13), 413 3/4” Sanding Discs (13).
Collets & Misc.: 401 Mandrel (x2), 402 Screw Mandrel (x1), 415 Dressing Stone (x1), Wrench (x1).
USA-BASED CUSTOMER SERVICE – Available by chat, email, phone or visit us at our service center in Racine, WI.

Check Stock

Wax Paddle Hot Plate Lab Denture New Dentist Dental Instrument Rogson Rims -6

Screw extractor is made of 4241 steel,with high hardness,durable,and easy to take out damaged screws.
The stripping screw extractor kit includes two extension drills.
It can be taken out in one step without modifying the extractor or adjusting the mandrel.
The wire stripping screw puller kit includes 20 wire stripping screw pulling devices,with 10 different sizes,suitable for screws or screws of any size.
It is best to use an electric drill,not the hammer drill mode!It should be used at low speed.

Check Stock

Arbor Mandrel for Drill 1/4 Shank 1/2 Threads Arbor Adapter for Buffing Polishing Wheel 2pcs

【Good Quality】This arbor mandrel with Integrated structure is stronger and durable, 2 large washers with dentation edge sandwich the wheels from....
【Easy Install】1/4" adaptor shank insert into drill, the other side hold wheels which with 1/2" center hole..
【Transformer】 Drill Arbor Adapter transforms your drill into a buffer / polisher..
【Multifunction】This drill mandrel fit for most of drills with 1/4" shank, screw thread allows for install wheels thickness Up to 1-1/4"..
【Dimension】 Overall Length: 2-3/8", Washer Diameter: 1-7/16", Shank Length: 7/8"..

Check Stock

HEYMOUS Ring Sizer Mandrel Measuring Tool Steel Ring Sizing Gauge Sizers Set Rubber Jeweler's Mallet Hammer Metal Finger Size Stick Wire Wrap Rings Tools Jewelry Making Kit

Ring Sizer Set is good value for quickly figuring out the sizes of rings and fingers.
Essential Jewelry size measuring tools kit for professional and beginner, designed for wire working,craft wire, wire wrapping and wire jewelry, easy to use.
The soft rubber hammer has two sides, can be used to flatten or strengthen wires, rubber head would not leave traces on the jewelry or damage your jewelry.
The Ring Mandrel sizer is made of aluminium material, US UK standard, easy to read size chart on mandrel for full and half sizes.
27 Pieces Ring Sizer Set made of steel,US size(0-13),come in half sizes, come with a flexible cable with a screw connection which can be opened easily.
Heavy-duty mandrel equiped with hammer, will make your rings round again easily. Do wire wrap rings and this is perfect for the construction of the ring. Holds shape perfectly and easy to maneuver.

Check Stock

Lasnten 64 Pieces Wool Felt Polishing Buffing Wheel Mounted Mandrel Grinding Bits Point Mandrel Polishing Kit Tool Accessories for Jewelry Rotary Tool Attachment

Package includes: you will receive 64 pieces wool felt mounted mandrel accessories for rotary tool, 2 shapes and 5 sizes, with felt-tipped. Felt polishing buffing wheels tool 1/8 inch/3 mm shank could hold up fairly to repeated cleaning, reloading and re-using.
Quality material: the mounted mandrel grinding bits are made of quality compressed wool and metal. These felt polishing buffing pads, wheels are exquisite with high toughness and excellent polishing capability. With 15 pieces cylinder shaped grinding heads, 15 pieces another shape grinding heads, 10 pieces 1-inch felt pad wheels, 20 pieces 1/2-inch felt pads, different sizes could meet your different need and replacement.
Extras tool includes: this polishing tool set also comes with 4 screw mandrels. The felt polishing accessories can be replaced easily.
Practical tools: these mandrel polishing kit tool accessories have nice practicality and more efficiency, which could make polished goods more clean and bright.
Nice performance: smooth and refine surfaces by using these felt buffs to polish or grind metal, ceramics and glass. Suitable for cleaning and polishing, applied for polishing and buffing on plastics, metals, jewelry and other small parts.

Check Stock

SCOTTCHEN Airway Buffing Wheel Extension Shaft 2-1/4 L Angle Grinder Buff Extender Kit 5/8 -11 Threads Arbor Extended Adapter Steel - 1set

【Application】This 5/8" Shank Cotton Buffing Polishing Wheel Extender suitable for Angle Grinder with 5/8"-11 threads mandrel and fit for polish....
【Function】This 5/8" Buffing Wheel shaft extender is used for extend the mandrel length then can fit thicker buffing wheels /airway buffing wheels,....
【High Quality】This 5/8" Buffing Wheel extension’s screw shaft and washer are made of firmness steel, the threads tube is made of aluminum, which....
【Excellent Effect】This buffing adapter is good effect to extend the shaft length of angle grinder and make your buffing work more easy and....
【Dimension】Threaded shaft dia x L: 5/8” x 1-7/8”, threaded tube ID x OD x L: 9/16” x 15/16” x 2-1/4”, Washer dia x thickness: 1-5/16”....

Check Stock

SCOTTCHEN Airway Buffing Wheel Extension Shaft 2-1/4 L Angle Grinder Buff Extender Kit 5/8 -11 Threads Arbor Extended Adapter Stainess Steel - 2sets

【Application】This 5/8" Shank Cotton Buffing Polishing Wheel Extender suitable for Angle Grinder with 5/8"-11 threads mandrel and fit for polish....
【Function】This 5/8" angle grinder arbor adapter is used for extend the mandrel length then can fit thicker buffing wheels /airway buffing wheels,....
【High Quality】This 5/8" Buffing Wheel extension’s screw shaft and washer are made of firmness steel, the threads tube is made of aluminum, which....
【Excellent Effect】This buffing adapter is good effect to extend the shaft length of angle grinder and make your buffing work more easy and....
【Dimension】Threaded shaft dia x L: 5/8” x 1-7/8”, threaded tube ID x OD x L: 9/16” x 15/16” x 2-1/4”, Washer dia x thickness: 1-5/16”....

Check Stock