Best Scope Rings For Heavy Recoil

Umarex Airem 2 Break Barrel .177 Caliber Pellet Gun Air Rifle

TNT (Turbo Nitrogen Technology) power system provides smooth and consistent shooting.
Features a Nucleus Rail System for easy scope and accessory mounting.
Includes fiber optic front and rear sights and a rubber recoil pad.
Shoots .177 caliber pellets at up to 1200 fps.
Includes a 4x32mm air rifle scope and scope mounting rings.

1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount.
30 mm diameter rings for mounting standard 30 mm rifle scope tubes30 mm diameter rings for mounting standard 30 mm rifle scope tubes.
Picatinny mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil | Not compatible with Weaver mounts.
Uses hardened steel Torx mounting hardware to prevent stripping of the bolts.
Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch.

Built specifically for long range scopes - 6-24x magnification scopes and above - with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes - with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil.
Available in three styles - a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.

Built specifically for long range scopes – 6-24x magnification scopes and above – with 3 inches of spacing between scope rings to accommodate scopes with longer dimensions and larger adjustment housing.
Lightweight one-piece scope mount for mounting standard 30 mm diameter tube rifle scopes – with weight comparable to a set of lightweight rings, while providing the added rigidity and convenience of a one piece mount.
Mounts to any flat top Picatinny rail equipped rifle with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle – guaranteed to hold zero against the toughest of recoil.
Available in three styles – a 0 MOA mount for zeroing your scope at short to mid range distances, a 20 MOA mount for zeroing your scope at longer distances, and a 30 MOA mount for serious long distance shooters..
Mount frame crafted from lightweight 6061 grade aluminum with hardened steel Torx mounting hardware to prevent stripping of the bolts.

SOLID AND DURABLE CONSTRUCTION: The ring set is made of strong yet lightweight aluminum in a black matte finish.
it was built to withstand any amount of recoil and multiple uses due to its strong performance.
FITS MOST WEAVER/PICATINNY-STYLE MOUNTS: Built with performance in mind, this set includes 2 pieces of low-profile rings that fit most Weaver and Picatinny-style mounts perfectly and hold your scope at a 1" height.
suitable for all 1-inch / 25.4mm scope tube.
VERSATILE RING SET: If you are searching for a tactical ring for your gun to mount your red-dot optics or magnifiers, opt for this 6-screw ring with a diameter of 1 inch.
this will hold any other 1" accessories that you might want to mount.
EASY TO INSTALL: Installing 1-inch scope rings is a relatively simple process that usually involves attaching the rings to the gun's receiver and tightening them with a screwdriver.
the rings provide a secure and stable platform for the gun, ensuring that it stays in place and does not shift during use.
LIGHTWEIGHT & COST-EFFECTIVE: 1" scope rings are relatively....

...d 1 inch scope tubes. The Picatinny base is compatible with all Picatinny mounting systems..
INCREASES STRENGTH It is not compatible with Weaver mounts. The torx locking screw system allows for quick yet powerful tightening while protecting the screws from stripping. These scope rings also features 2 square-integral recoil stops on each ring, which allows us to shave down the weight, while increasing the strength..
NO COMPROMISING Now you do not have to compromise when it comes to choosing either versatility or precision. The Monstrum Precision Rings allow you to properly align your scope to your rifle so you have one less thing to worry about..

QUALITY SIGNATURE ZEE RINGS – Machined from solid steel, count on reliable accuracy from these mounting rings..
PRECISE MOUNTING ACCESSORIES – These rings are made to an exact tolerance for ultimate accuracy and precision..
STRONG BURRIS RINGS – Manufactured so the top and bottom are perfectly matched, these rings are unmatched in strength and fit..
UNIQUE MOUNTING – Pos-Align Inserts offer tremendous gripping power and durability and will not damage the scope finish..
VERSATILE MOUNT – Available for all types of optics and bases, these solid steel rings handle recoil smoothly..

QUALITY SIGNATURE ZEE RINGS – Machined from solid steel, count on reliable accuracy from these mounting rings..
PRECISE MOUNTING ACCESSORIES – These rings are made to an exact tolerance for ultimate accuracy and precision..
STRONG BURRIS RINGS – Manufactured so the top and bottom are perfectly matched, these rings are unmatched in strength and fit..
UNIQUE MOUNTING – Pos-Align Inserts offer tremendous gripping power and durability and will not damage the scope finish..
WEAVER-STYLE ZEE RINGS - These solid steel rings handle recoil smoothly and work with Weaver-style bases..

RUGGED & DURABLE - The S-Series Base design is one of the strongest and most versatile mounting systems available today.
COMPATIBLE WITH S-SERIES STEEL RINGS - These bases offer a full-width recoil slot in each base that mates with the recoil control keys of S-Series rings, resulting in maximum bearing surface to fend-off severe recoil.
TWO-PIECE CONSTRUCTION - Two-piece, high-quality NIKON S-Series Steel Bases allow you to remove your scope with just a twist of the levers and reinstall it in seconds with no loss of zero.
HIGH-QUALITY STEEL BASE - Manufactured, using the most reliable materials, S-Series bases feature strong, solid steel construction with matte black finish that will last the life of your rifle.
BEST FIT - The Nikon S-Series Steel Riflescope Bases were developed to guarantee that you have the ideal way to install your favorite optics to your primary favorite weapon.
included components:S-Series A-Bolt Base.