Best Saws For Cutting Wood

CMT 252.072.12 ITK XTreme Industrial Fine Cut-Off Saw Blade, 12-Inch x 80 Teeth ATB Grind with 1-Inch Bore

For fast extra-clean crosscuts and occasional rip as well on wood and plywood..
To be used on radial arm saws, miter saws, table saws for cutting soft/hard wood and plywood..
0.110 kerf thickness, 0.087 plate thickness, 15° Hook Angle, 1 Flat + 2/20° alternate teeth Grind..
Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
Laser-cut plate features expansion slots to reduce noise and anti-vibration design..

Saw Blades Specifications - 5-4/5" Ultra-thin kerf Wood Cutting Circular Saw Blade for fast cutting, Teeth: 52T, Diameter: 5-4/5"/ 147mm, Arbor: 4/5"(20mm), HI-Density Carbide Tip for Maximum Performance.
MAX RPM - 10000, Kerf: 0.055"/1.4mm, Hook Angle(forward): 20 Degree, Tooth design: ATB, Fast and Smooth Cuts..
ATB Tooth Design to facilitate splinter discharge and to prevent the saw blade from being blocked by sawdust, make cutting easier. Extra-hard steel blade body - delivers accuracy and resists bending and deflection for true cuts..
Laser cutting Anti-Vibration Slots can drastically reduce vibration and sideways movement during the cutting process, Also help channel heat build-up during the cutting process, allowing the blade to expand and contract, extending the blade life..
Upgraded to Teflon surface coating, strong non-stickiness, lowest friction coefficient, anti-adsorption, high-temperature resistance. Smooth and efficient rotation..
Ideal for ripping and crosscutting on softwood, hardwood, plywood, chipboard with fine finishing, not for metal cutting. Widely use for Circular Saws, Miter Saws, Table Saws, Hand Saws, and Chop Saws, save your time and energy..

for rip/crosscuts on wood. The large gullets allow deep cuts and effective chip clearance..
Use on radial arm saws, miter saws, circular saws, table saws for cutting soft/hardwood & plywood..
0.094 kerf thickness, 0.063 plate thickness, 15° cutting angle, 1 Flat and 4 Alternate Teeth grind..
Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..

For fast rip cuts on soft/hardwood thanks to the thin kerf design..
To be used on radial arm saws, miter saws, table saws for cutting soft/hardwood. Good on plywood..
0.098 kerf thickness, 0.071 plate thickness, 20° Hook Angle, 1 Flat + 2/15° alternate teeth Grind..
Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products..
Laser-cut plate features expansion slots to reduce noise and anti-vibration design..

High quality and professional grade for ripping and crosscu tting of thick hardwood to 3-1/2" thick and softwood to 1" thick..
The blades can be used on Circular Saws, Table Saws, Miter Saws, Hand Saws and Chop Saws..
Ideal for cutting hardwood, softwood, exotic wood and abrasive wood..
Thin kerf allwos a smooth finish with minimum waste. Lower hood angle improves the surface quality of the cut and increases the feed pressure..

The circular saw cutting blade is made of high‑quality hard alloy and is very durable..
It is suitable for table saws or circular saws in all cutting of softwood, hardwood, chipboard or plywood..
The neatly arranged teeth are very incisive and make sure that the cutting is fast and smooth..
This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
This universal circular saw cutting blade is specially designed for wood cutting for various purposes..

【Highly Efficient Cutting & Cordless Design】 20V cordless reciprocating saw for wood with a 0.6-inch stroke removes more material for more efficient cutting. Lightweight hand saw w/ high-speed motor provides superior efficiency and control, which can help you to cut branches or metal easier. With battery powered electric sawzall's cordless design, our pruning blade for reciprocating saw allows you to get rid of annoying cords and space limitations. No more worrying about inefficient saws power!.
【6 Blades & Tool-less Blade Change】Difficult to use and complicated to install? Powerful reciprocating saw kit comes w/ 6 saws for wood & pvc to meet all of your cutting needs. 4 blades are for wood and 2 blades are for metal, switch easily when you need to saw steel and tree.The hassle-free blades for wood cutting change system allows you to easily use between all blades to cut branches, PVC pipe, fiberglass, thin steel, etc. Bare hands operation without any tools, allowing you to cut anywhere!.
【20V 2.0Ah Battery & 45 Mins Fast Charging】No longer worry about running out of POWER anymore! Compact Reciprocating Saw for wood & metal cutting equipped with a 20V 2.0Ah rechargeable battery and a Fast Charger.When cutting branches outdoors，you don....

Special Carbide prevents material failure, Non-Stick Orange Shield protects against corrosion..
For excellent rip and crosscuts on wood and plywood. Fast rip cut with high precision!.
For use with radial arm saws, miter saws and table saws for cutting soft/hardwood and plywood..
0.094 kerf thickness, 0.063 plate thickness, 15° cutting angle, 10° ATB+Shear grind..
Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..

Professional high speed steel M42 (not M3) with cobalt 8% cutting teeth hardened to control the efficient and durable and reliable use on workpieces like sheet metal, Aluminium, wood, plastic, plasterboard, etc.. HSS M42 teeth is particularly good for high strength metal such as stainless steel (HSS M3 ones are good for middle strength metal but not high strength one) because HSS M42 contains cobalt 8%, which raises the hardness of the teeth. HSS M42 is about 20% more durable than HSS M3..
9-piece hole saws: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm).
4-piece accessories: arbor 9/16"-1-3/16" with shank 3/8".
arbor center drill with shank 1/4". Center drills in this kit are all made of real HSS M2 and fully ground, while a lot of bi-metal hole saw kits are with low grade HSS center drills roll-forged..
with max cutting depth 1-3/8" (35mm) and ideal for drilling on sheet metal (even high strength metal because of HSS M42 with cobalt 8% teeth), wood, plastic, plasterboard, Aluminium, etc.. Particularly for sheet metal: the cutting depth is 2mm to 5mm, depends on the hardness of the metal and taking hand drill ....