Best Sanding Rolls

Performax Type Ready-to-Cut Ready-to-Wrap Abrasive Sandpaper Rolls 3 inch by 35 feet Long for 16-32 Drum Sanders

  • Made from heavy duty cloth backing our abrasive rolls are the perfect economical replacement sandpaper rolls for your Performax and Jet 16-32 and....
  • The rougher or lower grits like 60 grit can be used for abrasive planing and dimensioning. The medium grits like 80, 100 and 120 are typically can be....
  • The right amount of pressure you exert on your boards is absolutely critical. Too much and it will shorten the life of your abrasive roll, burn the....
  • Straight feed? How about angling your stock feed through the drum instead. Angling the stock offers many advantages like less loading due to glue....
  • When sanding misshapen stock pieces you should always start sanding the piece with the crown side up. This helps prevent tipping or rocking when the....
Check Stock

3M 2590 Stikit Gold Roll P400 Sandpaper-Dura-Block-Sand

  • 1 Roll of 3M Part# 2590 Stikit Gold Sheet Roll, P400A Grade (2-3/4 in x 45 yd).
  • Use for fine featheredging or last final sanding step before priming..
  • Sheet rolls have a pressure-sensitive adhesive for easy application and removal..
  • Works Excellent with DuraBlock Hand Sanding Blocks, AFS-Adjustable Flexibility Sanders.
  • 3M 2590 Stikit Gold Roll P400 Sandpaper-Dura-Block-Sand.
Check Stock

Flat File Sanding Stick With Replaceable Abrasive Strips For Sanding Shaped Objects on Wood and Some Metal. Ideal For Woodworking, Furniture, Restoration, Cabinets, or Automotive Use

  • Quit using a sandpaper wrapped tongue depressor or emory board to get into those tough to reach areas. The Sanding File works just like a normal file does. Thats what makes this tool so unique! It gives you the look and feel of a tool that you already know how to use and it feels just right in your hand when you're using it. The only real difference between it and a file is that this file uses sandpaper instead of a metal abrasive..
  • This allows you to sand those wooden areas that are normally hard to reach with bulky and hard to handle sanding blocks. It definitely beats folding, paper and folding the paper again to try and get in that tight spot..
  • The Sanding File has a clip system that easily accepts the sandpaper strips that are included with the tool..
  • Strips can also be cut from any standard 9 x 11 sheet of sandpaper (not included) or 1" wide sandpaper rolls (not included). Sanding Surface is approximately 5-1/2" long on both sides..
  • The Sanding File comes with 1 ea. 80, 120, 160, and 240 pre-cut sanding strips to get you started..
Check Stock

BLYSK and Dura-Block sanding block AF44A with set of FREE hard plastic putty spreaders for Applying Fillers, Putties, Glazes, autobody restoration

  • Dura-Gold Pro Series K-Block Sander Firm & Flex Hand Sanding Block Kit with 3 Lengths of Sanding Blocks.
  • Sizes 9", 16" and 24" long x 2-3/4" wide. Uniquely designed rectangle hook & loop hand sanding blocks with a 2-way design system that allows them to be used with both hook & loop and PSA sandpaper sheets. Each block includes an attachable PSA conversion adapter pad with a vinyl face that converts the blocks for use with PSA pressure-sensitive adhesive sandpaper sheets..
  • K-Blocks are constructed with medium-density durable polyurethane foam and have a semi-rigid acrylic composite backing plate that provides a perfectly flat and level sanding surface that maintains its flatness while following the curves of the vehicle. These blocks are designed to give collision repair professionals and restoration enthusiasts a sanding block tool that easily allows you to find and restore low and high spots..
  • A premium-quality 2-3/4" wide rectangular-shaped hand sanding block, which is the standard width of longboard file sandpaper. You can easily attach either loop & loop or PSA pressure-sensitive adhesive longboard file sandpaper sheets or continuous sandpaper rolls to it. The block is easy to grip for even control when sanding flat, tight corners, contours, and o....
Check Stock

11 Piece 21 Profile Contour and Angle Sanding Grip Pack for Sanding Inside and Outside Angles Beads Corners Flutes Sign Lettering Ceramics Molding Plastic Auto Body Marine Wood and Around The Home

  • ...r inside, outside, flat, curved, small and tight areas all in one convenient package! The non-slip rubber pad prevents abrasive slippage and hand fatigue. This set is perfect for woodworkers, auto body, metal work, arts, crafts or even around the house..
  • These 11 grips with 21 different profiles will tackle most any sanding project you may come across. Designed to work with standard 9” x 11” sanding sheets or 3” wide sandpaper rolls (sold separately). This set is a set of sanding pads that no one should be without..
  • The Contour Sanding Grip pads are double-ended to make it super easy to sand convex or concave surfaces. Each pad has a convex profile at one and a concave profile at the other along with a narrow flexible section in the middle that can be used for sanding..
  • Our Angled Contour Grip sanding pads change the angle sanding game by providing you the ability to sand inside angles without flattening or smoothing the crispness of your original profile. Not only does this set contain inside angle profile pads, there are 1/8” and ¼” round overs, various non specific round over profile and of course the flat sanding grip to sand general shapes and objects..
  • This 11pc set comes with the following: 2.6mm thick flexible pad, 1/8” and ¼” rad....
Check Stock

Porter Cable 767600805 PROFILE SANDER MICRON H & L PRE-CUT SHEETS, 80 GRIT, COARSE (5 PCS)

  • Continuous Roll of LANHU – (800 Grit) Long-Board Psa Premium Gold Sanding Paper – Made with Super Coated Aluminum Oxide Corundum For A Sharp Cut and Uniform Finish.
  • LANHU Continuous Rolls Are Precut To Standard File Boards At 2-3/4" X 21.9 Yards Or 66 Feet and Are Conveniently Packed In A Roll with A Liner To Protect The Pressure Sensitive Adhesive (Psa) From Contamination Until You Are Ready To Use. LANHU Discs Will Easily Press Onto Your Backing Pad and They Also Remove Cleanly Leaving An Uncontaminated Surface For The Next Sheet.
  • LANHU - Long Board Sheets Are Ideal For: Shaping Body Filler, Removing Paint, Rough Feather Edging, Primer/Metal Sanding.
  • LANHU Sandpaper Long Board Sheets Delivers A Fast, Exceptionally Long Lasting Cut with A Consistent Scratch Pattern For Auto Body and Painting, Wood Working, Metal Working, Fiberglass, Primers and Plastics.
  • LANHU Long Board Sheets Can Be Used On: Pneumatic Air File Shoes, Hand Sanding Blocks, Dura Blocks, K-Blocks, Firm Or Flexible Longboard File Boards. Provides Exceptional Sanding Performance, So You Can Get The Job Done Fast, Saving You Time and Money.
Check Stock

Dura-Gold Pro Series Rigid Longboard Hand Sanding File Block with Both Hook & Loop Backing and PSA Backing Conversion Adapter Pad - For Continuous Rolls or 16-1/2' x 2-3/4' Sandpaper Sheets, Auto Wood

  • Dura-Gold Pro Series Rigid Longboard Hand Sanding File Block. Uniquely designed hook & loop longboard hand sanding file block with a 2-way design system that allows it to be used with both hook & loop and PSA longboard sandpaper sheets or rolls. Includes an attachable PSA conversion adapter pad with a vinyl face that converts the longboard file block for use with PSA pressure-sensitive adhesive sandpaper sheets..
  • An ideal high-performance paint preparation longboard hand sanding block that is constructed durable reinforced plastic. The pad's hook & loop and PSA backing enable quick and secure sandpaper attachment and removal for optimal sanding disc life..
  • A premium-quality 2-3/4" wide longboard hand sanding block, which is the standard width of longboard file sandpaper. You can easily attach either loop & loop or PSA pressure-sensitive adhesive longboard file sandpaper sheets to it. The block is easy to grip for even control when sanding flat, tight corners, contours, and other hard-to-reach areas..
  • A versatile longboard hand sanding block for use sanding or polishing in auto body and paint shops, detailing shops, woodworking wood furniture making, metalworking shops, industrial shops, drywalling, and other household and crafting projects..
Check Stock

6 Piece 12 Profile Double Ended Contour Sanding Grip Set for Concave & Convex Profile Sanding. Large Size Grip Pads with Profiles. Crown Molding, Molding, Frames or General Woodworking Use

  • The Contour Sanding Grip pads are double ended to make it super easy to sand convex or concave surfaces. Each pad has a convex profile at one end and a matching concave profile at the other end along with a narrow flexible section in the middle that can also be used for sanding..
  • Each durable, flexible rubber grip allows you to easily sand concave or convex profiles without distorting the radius. The non-slip rubber pad prevents abrasive slippage and hand fatigue. This set is perfect for woodworkers, auto body, metal work, arts, crafts or even around the house..
  • These 6 grips with 12 different profiles will tackle most any sanding project you may come across. Designed to work with standard 9” x 11” sanding sheets or 3” wide sandpaper rolls (sold separately). This set is a set of sanding pads that no one should be without..
  • No more rolling or folding sandpaper to get the job done. This set is the perfect set for any homeowner, hobbyist, woodworker or even professionals! Makes sanding those tough jobs easy and fast without wasting money on torn sandpaper..
  • This package includes 6 contour grips with the following inside/outside diameters: 1/4'', 3/8'', 1/2'', 5/8'', 3/4'' and 7/8''. Diameters are molded into the rubber pad for easy selection..
Check Stock

Dura-Gold - Premium - 180 Grit Gold - Longboard Continuous Roll 20 Yards Long by 2-3/4

  • Continuous Roll of DURA-GOLD (180 Grit) LONG-BOARD PSA Premium Gold Sanding Paper Made with Super Coated Aluminum Oxide Corundum for a sharp cut and uniform finish.
  • DURA-GOLD Continuous Rolls are precut to standard File Boards at 2-3/4" x 20 Yards or 60 Feet and are conveniently packed in a roll with a liner to protect the pressure sensitive adhesive (PSA) from contamination until you are ready to use. Dura-Gold discs will easily press onto your backing pad and they also remove cleanly leaving an uncontaminated surface for the next sheet.
  • DURA-GOLD - Long Board Sheets are ideal for: Shaping Body Filler, Removing Paint, Rough Feather Edging, Primer/Metal Sanding.
  • DURA-GOLD Sandpaper Long Board Sheets delivers a fast, exceptionally long lasting cut with a consistent scratch pattern for Auto Body and painting, wood working, metal working, Fiberglass, Primers and Plastics.
  • DURA-GOLD Long Board Sheets can be Used on: Pneumatic Air File Shoes, Hand Sanding Blocks, Dura Blocks, K-Blocks, Firm or Flexible Longboard File Boards. Provides Exceptional Sanding Performance, so you can get the job done fast, saving you time and money.
Check Stock