Best Safe Puller Tool

OOir onOO Manual Stand Up Weed Puller Head Replacement Tool, 4-Claw Steel Head Design, Black

Upgrade Design – NEW and IMPROVED steel head design for a stronger weed removal tool..
Premium Material – Standing weed puller Made of steel, Not easy to break.Note: This Weed Puller has no handle, only manual weeding head..
Stand Up Design – Easily Remove Weeds Without Bending, Pulling, or Kneeling..
Modern & Safe Design – Steel 4-claw design works on all soil types especially after a good rain or watering..
Wide Application – The weed puller is workable for crabgrass, thistle, tap root, crab grass, taproot, plantain, clover, burdock, bush etc. It is a good tool for your garden, backyard, patio, lawn, etc..

Check Stock

2 Packs Dent Removal Kits - Powerful Car Dent Puller Small Large Car Dent Repair Kit Auto Dent Remover Tool for Car Repair, Glass, Screen, Objects Moving

【Note】- Dent puller doesn't work on curved surface (of which a car has many) !.
【Attentions】- Before purchase, please determine whether the location of the car dent is elastic surface deformation.
plastic surface deformation(Such as car bumper and four bodies with metal material) can not be directly repaired through the dent puller repair, Repairs can only be carried out at a professional car repair shop..
【Upgrade Unique Design】- Upgrade dent remover tool for car with our ergonomic palm-fit dent remover tool. One-touch hand pulling is effortless and comfortable, while the side bullhorn ensures safe, hassle-free kit removal..
【Strong Suction Cup】- This is a dent remover tool specially designed for elastic surface deformation repair.The maximum suction power reaches 180 lb and the small one reaches 130 lb.
Improved curved rubber suction cup has stronger grip and better suction power than traditional ones, making the dent puller easier and more efficient to use. (The dent puller diameter should exceed the suction cup base diameter for vacuum adsorption. Large: 4.3in. Small: 2.3in)..

Check Stock

Gresdent Trim Puller Heavy Duty Pry Bar Home Trim Tile Removal Tool Remodeling Wood Floor Baseboard Molding Nail Pulling and Hex Wrench Tool (Red)

【Ideal for Removing】The trim puller is specifically designed for safe removal of tiles, baseboards, hardwood floors, window trim,molding, door casings, trim panels, and even nailed or glued countertops, without using shims or board spacers..
【Easy To Use】First remove or separate the caulk that seals the top of the baseboard by cutting it with a sharp knife, then insert the puller above the baseboard and tap it with a hammer or mallet.
it will slide right behind the baseboard. Gently pull on the tool and the baseboard will pop out of the wall..
【Durable Material】 Made of high quality carbon structural heat-treated steel, it is a very sturdy tool that can withstand repeated whacks and can be used over and over again. The comfortable silicone material can help you hold the handle easily and protect your hand from injury..
【Time & Effort Saving】The larger, flatter contact surface on the puller spreads out the force for more efficient removal, making it possible to do more work with less effort. The 16-degree wedge center facilitates removal of trim and baseboards and preven damage to both trim and walls.p.

Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
【Easy & Fast Remove】1.Remove the ....

Check Stock

ABN Automotive Car Steering Wheel Puller Compressor Remover Set – Vehicle Steering Wheel Lock Plate Removal Tool Kit

EFFORTLESSLY REMOVE STEERING WHEELS: Use the ABN | Steering Wheel Removal Tool Set to apply equal pressure so you can safely remove steering wheels.
This universal steering wheel puller tool kit includes a steering lock plate remover in order to remove and replace the bearing in the steering column.
VARIOUS APPLICATIONS: For most American domestic and import cars and light trucks.
Remove steering wheels with or without a telescoping tilt or tilt steering columns (first remove the horn cover plate and the steering wheel nut when applicable).
Compresses locking plate spring to allow removal of retaining clip.
Allows access to turn signal switch and SIR modules on current GM vehicles.
Also allows you to pull old GM steering wheels to service the ignition lock cylinder for locksmith needs.
BUILT TO LAST: When used properly, this steering wheel puller kit will not cause any bending or spreading.
Each piece in this steering wheel kit is constructed from steel with various finishes for maximum strength and longevity that resists rust and corrosion.
We recommend putting a drop of oil (not included) on the washer that goes between the nut and the locking plate tool when compressing the steering wheel locking plate.
EASY STORAGE: Heavy-duty 12.6” x 2.25”....

Check Stock

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
These tools make the job simple and prevent damage to your bearings when pulling.
Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
For removal only, not intended for installation.
FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
Sizes permanently laser-etched on tool for easy identification.
Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.

Check Stock

Paintless Dent Repair Tool Dent Puller Kits Heavy Duty Golden Dent Lifter Puller with 18 PCS Glue Pull Tabs Professional Car Dent Remover DIY Auto Body Dent Pulling Tool with Glue Stick & Glue Gun

【Professional Dent Repair Sets】This is a comprehensive car dent puller tool kit, including 1pc golden dent lifter, 1pc melt glue gun, 5pcs yellow hot melt glue sticks, 5pcs black hot melt glue sticks, 18pcs dent repair tabs of different sizes and shapes, you can choose according to the size of the dented area, and the glue tabs' patterns provide extra grip to help you fast lift the dent. Most dents can be easily removed with our premium dent removal tool..
【High-Quality Car Dent Repair Tools】Made of high-quality metal and rubber materials, the car dent repair tool is durable enough to last for years. The paintless dent puller kit has a soft silicone bottom that protects the original paint, and it is easy and handy to lift the dent..
【Easy To Use】Clean dent surface, according to the dent size to choose the Glue Puller Tab, put the heated glue on puller tab, then get the tab on the dent & only let it dry for 10 seconds then pull, repeat the above steps until the dent disappear. After the pull, the glue comes off soooo easily with just a little spray of denatured alcohol..
【Versatile & Adjustable Dent Puller Kit】Strong paintless dent repair tabs can save a lot of money for you compared with the auto body shops. This is a well-built car dent....

Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
Pulls pulleys on GM belt-driven vacuum pumps.
HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
Power steering pump pulley installer designed to tackle any small pulley job.
CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
Pulls pulleys on GM belt driven vacuum pumps.
Pulls pressed-on water pump pulleys of GM V6 engines.

Check Stock

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
You can save hundreds of dollars by using this one pilot puller.
VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
This blind hole bearing puller is built to last.
DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.

Check Stock