Best Rv Water Tank Drain Valve

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

  • Each time your compressor runs, the moisture in the air condenses in the tank. This moisture must be drained daily from the tank to prevent water buildup. Hromee Extended Tank Drain Valve Assembly is perfect for the compressor tank..
  • The valve kit comes with a 10” flexible braided steel drain hose which prevents breaking and kinks. 1/4in. NPT threads at both ends matches 1/4in. NPT male brass fittings. Max working pressure: 175 PSI. Blasting Pressure: 475 PSI. Max Temperature: 200 degrees F..
  • This 1/4 in. ball valve is made of chrome-plated brass for higher corrosion resistance than regular brass or steel, and has a lever handle for on/off to control the flow between pipes, tubes, or hoses. The rubber-wrapped handle is designed for easy-use and labor-saving. This ball valve is pressure rated to 300 PSI at a maximum operating temperature of 212 degrees F..
  • The extended tank drain kit offers a 1/4 in. elbow with pre-applied thread sealant, allowing for attaching the additional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
Check Stock

Danco HC660 Toilet Fill Valve Repair Kit Pack of 1 Blue White

  • WATER-SAVING toilet fill valve with built-in mini-valve that adjusts tank refill water level.
  • DETECTS LEAKS: The water-saving toilet fill valve sounds an audible alert when a leak is detected making you aware of any potential issues that must....
  • CLEANING JETS: Strong jets stir up debris in toilet tank in order rush any dirt down the drain with every flush keeping your toilet tank cleaner.
  • EASY ADJUSTMENTS: Shuts off water inside tank making repairs a snap, refills quickly, and has an adjustable height of 11 inches to 13.8 inches.
  • EASY INSTALLATION: Smart Nut helps with easy installation without tools in most standard toiletes.
Check Stock

Rv Heater Anode Rod 2 Pack Eau Magnesium Rv Hot Water Tank Anode Rod Suburban and Morflo - 9.25''Long & 3/4'' Thread - Long Lasting Tank Corrosion Protection

  • Rv water heater anode rod exclusive suburban anode rod absorbs the corrosive action accused by hot water and prolongs. As soon as the anode rod is depleted and fully decayed, the water heater begins to rust, then crack, fail and leak. The life of your water heater tank..
  • Made using high-quality magnesium. Our magnesium rod absorb oxidizing substances and all the contaminants in the water towards itself by electrolys, preventing the water tank from rusting in the metal water tank, ensuring your RV water heater lasting use. These water heater magnesium anode rods work better than aluminum ones in attracting corrosive elements, protecting your water heater and prolonging its life span with little to no investment..
  • The rv anode rod’s size and material type: magnesium anode rod, 9.25" long, ¾" threads, uses a 1-1/16’’ socket..
  • The rv magnesium anode rod fits for almost all water heaters including.
  • A.O. smith,Rheem, Reliance, Richmond, Kenmore, State, GE and many more that also use the standard ¾" NPT Anode Rod Connection..
  • The rv magnesium anode rod should be removed from the water heater’s tank annually for inspection and replaced when more than 6” of core wire is exposed at either end of the rod. Pack of 2: Unscrew the anode rod to drain the ta....
Check Stock

Class A Customs 40 Gallon RV Waste Black Water Holding Tank WT-4000

  • 40 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 27 Gallon RV Waste Black Water Holding Tank WT-2700

  • 27 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 14 Gallon RV Waste Black Water Holding Tank WT-1400

  • 14 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 31 Gallon RV Waste Black Water Holding Tank WT-3100

  • 31 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 30 Gallon RV Waste Black Water Holding Tank WT-3000

  • 30 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock

Class A Customs 24 Gallon RV Waste Black Water Holding Tank WT-2400

  • 24 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
  • INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
  • INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
  • NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.
Check Stock