Best Rs232 Rs485 Rs422 Converter

2Packs DB9 Serial Adapters No Soldering Needed D-SUB 9-pin RS232 RS485 Adapter to Terminal Connector Signal Module with Bolts Nuts and Screwdriver 1PCS Male+1PCS Female

【No soldering needed】 This is SO convenient， convenient wiring. The shell is designed with folding buckle, It can be disassembled or assembled....
【DIY DB9 cable 】Using 9pin male and female connectors, you can make DB9 cable or USB to RS232 / RS485 cable by yourself. The cable length and....
【Functional features】suitable for all kinds of industrial control products that need serial communication for pin connection, all copper base,....
【Scope of application】D-sub9pin does not need to weld serial port connector, which is suitable for RS232 / RS485 / RS422 serial adapter COM port....
What you get :(1PCS Female +1PCS Male )with case，1PCS Screwdrivers ，4PCS 4#5+7 Serial port Nut ，4PCS 4#62mm Serial port long bolt ，4PCS 3*8mm....

Lower power consumption than the same data transfer rate when the traditional optical isolator 1/10, the minimum operating current 0.8mA..
Performance higher timing accuracy, transient common mode rejection, the degree of matching between channels are better than the traditional optical isolator..
The smaller the integration, the printed circuit board (PCB) area of 40% of the traditional photoelectric isolator..
Application: RS-232/RS-422/RS-485 transceiver isolation.

Specially designed for VISCA and PELCO-P/D compatible PTZ cameras.
Can set the address code of VISCA and PELCO-P/D compatible PTZ cameras independently.
Unique control code learning function allows end-user to revise the control code commands.
Supports multiple communication modes: RS485, RS422, RS232.
All parameters are set by key-press operation procedure making setup convenient and fast.

This is an industrial USB to RS232/485/TTL isolated converter with original FT232RL inside. It features embedded protection circuits such as power....
The USB TO RS232/485/TTL is very easy to use fully automatic transceiving without delay. Due to its fast communication stability reliability and....
Fully automatic transceiver circuit with no delay ensures the USB port communicates with different interfaces fastly and stably without interfering....
Onboard unibody power supply isolation provides stable isolated voltage needs no extra power supply for the isolated terminal.
High quality USB-B and RS232 connectors smoothly plug/pull.

This is an industrial USB to RS485 converter with original FT232RL inside. It features embedded protection circuits such as lightning-proof,....
The USB TO RS485 is very easy to use, allows automatic transceiving. Due to its fast communication, stability, reliability, and safety, it is an ideal....
USB to RS485 communication. Adopt original FT232RL, fast communicating, stable and reliable, better compatibility..
Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit, lightning-proof &....
3 LEDs for indicating the power and transceiver status.Operating system: Mac, Linux, Android, WinCE, Windows 10 / 8.1 / 8 / 7 / XP.

Convert your DB9 male connector into an RJ45 female connector.
Used for modular RS232 RS422 and RS485 connections.
Can be used to make customized serial connections.
DB9 to RJ45 Modular Adapter Female to Female / DB9 to RJ45 Adapter / RJ45 to DB9 Adapter / RJ45 to DB9.
Guaranteed reliability with a lifetime warranty.

Built-in a new and original FTDI IC device ‘FT232RL’, which handles all the USB signalling and protocols. TTL levels of +5V and +3.3V adjustable....
Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC and GND connections.
POW(power), RXD/TXD transceiver communication LED indicator....
Windows 8 and newer OS, Linux and Mac OS will install FTDI driver automatically, except Chrome OS. For details of OS compatibility and installation....
Typical applications: USB to RS232/RS422/RS485 converters, Support EEPROM, Vendor ID re-write, unbrick routers and Mprog3.5, interface to GPS modules,....
You will get: 1 x Moyina USB to TTL Module + 1 x Jumper + 10 x Dupont Cables (7.9”, female to female), which are packed by antistatic bag. We offer....

9M Long Range，9dbi Antenna RS232/RS485/Wiegand.
Support protocol ISO18000-6C/EPC Gen2 ,ISO18000-6B,Working frequency wide band 860-960MHZ.
Long reading distance 3-8m , Integrative UHF RFID Reader,8dbi Antenna RS232/RS485/Wiegand.
Top Quality. Our products are manufactured in an ISO-9001 quality certified factory. All parts are extensively tested by quality control experts to ensure high quality..

Price For: Each Accessory Type: CABLE, SERIAL CONVERSION For Use With: USB to RS485, SERIAL CONVERSION RoHS Compliant: Yes.
The USB-RS485-WE-1800-BT from FTDI is an USB to UART cable with RS485 level UART signals..
It corporate FTDI's FT232RQ USB to serial UART interface IC which handles all USB signalling and protocols.
The integrated electronics also include RS485 transceiver, Tx and Rx LEDs which give a visual indication of traffic on cable..