Best Routing End Mills

SpeTool 1/8 End Mills for Aluminum 3 Flutes CNC Spiral Router Bits for Aluminum Cut Non-Ferrous Metal Upcut 1.5 inches Long 5 Pieces

【SPECIFICATIONS】End mills for aluminum with 1/8” shank, 1/8” cutting diameter, 7/16” cutting length and 1-1/2” total length, 3 flutes with flat top, 5 pieces included in the package..
【HIGH PERFOMANCE】These end mills for aluminum are designed for perfect surface finish because of the effective chip removal. With the long service life they are suitable for side milling, end milling, finish machining, etc..
【HIGH PRECISION】High precision grinding and polishing, high resistance to abrasion and temperature resistance, good rigidity, high durability and not easy to break..
【ALUMINUM APPLICATIONS】Best for processing aluminum 6061,7075 etc. Also suitable for non-ferrous metal, plywood, OAK, MDF, and Any Hardwood Working..
【WIDELY USED】These aluminum end mills suit for CNC routers, and Makita, Bosch, or any brands of plunge routers with 1/8" collet..

Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills.
Fine-pitch tooth design and tool geometry are suitable for machining steel up to Rockwell hardness C45, stainless steel, titanium alloys, and nickel-based alloys.
Long-reach end mills have an extended shank for access to recessed areas of the workpiece.
Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than TiN and TiCN coatings.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.

Solid negative ball stops with 15 degrees spacing fast & easy set-ups..
Can be used for grinding 2-3-4-6-8 and 12 flute end mills.
This fixture takes 5C round collets for grinding end mill 1/16" ~ 1-1/8" .Clearance & relief angels are built into the base.
Shell mills can easily be held with Straight Shank arbors.
Clearance & relief angels are built into the base.

and an adjustable handle for maximum comfort..
GRR-Ripper 1/8" Leg Accessory attaches to pushblock body or side leg to allow for safe, accurate, and consistent ripping of 1/8" thin strips. Gravity Heel Accessory features auto-retracting technology for reducing blowout. Provides a secure backing to routing operations and can be used as a template for repeat routing. Exceptional with long stock -- the heels grab the tail end of your board and automatically retract mid-board. Includes 5 heels, 2 heel spacers and mounting hardware..
Gravity Heel Accessory features auto-retracting technology for reducing blowout. It provides a secure backing to routing operations and can be used as a template for repeat routing. Exceptional with long stock -- the heels grab the tail end of your board and automatically retract mid-board. A great accessory for your table saw, band saw, and routing needs! Fits any existing GRR-RIPPER. Includes 5 heels, 2 heel spacers and mounting hardware. Adjustable up to 1". Fits any existing GRR-RIPPER..
The GRR-Ripper Handle Bridge Accessory mounts on the handle between it and the pushblock to provide 4 points of surface contact for evenly distributed downward pressure, and operational range of motion to enable you to pos....

4 flute design for creating finer finishes and a higher metal removal rate.
General purpose end mill for working on all types of materials.
Made of extra-fine grade carbide for ultra high transverse rupture strength.
Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications.

High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm..
Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating..
Applicable Materials: Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Wide Compatibility: The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized co....

High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality..
Cost-Effective: Coming with 4x 2-Flute tapered ball nose end mills, Shank Diameter: 3.175mm, Radius: 0.25, 0.5, 0.75, 1.0mm, Cutting Length: 15mm, Overall Length: 40mm..
Versatile: Perfect for 3D machining jobs like molds, rapid prototyping, models and other other precision parts processing, these Tapered ball nose bits can do the best..
Applicable Materials: These nano blue coating bits have an HRC rating of 65 and are optimal for milling a wide range of materials, including plastics, aluminum, circuit board, wood, etc. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below..
Wide Compatibility: Genmitsu TB04A tapered ball nose end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure ....