Best Router Sled

Woodhaven 3004 51\ Planing Sled

  • Our Planing Sled is an affordable solution for surfacing or milling live edge slabs, wide stock, butcher blocks or workbenches, removing a finish from a surface and other jobs impossible for a planer. Router & Bit NOT included..
  • 51" wide maximum capacity, 60" Ultra Track rails & 32" Double Track rails.
  • 3" tall Ultra Track aluminum rails support the router and won't deflect as you move the router back and forth over the stock. Router glides between the Ultra Track rails for front-to-back movement. You supply two wood rails, 12" to 16" longer than the work. No limit to the length of the work. Double Tracks glide on top of the wood rails and guide the router/Ultra Tracks from side-to-side..
  • Includes a NoDrill Plate with a quick attach feature so your router can be quickly attached or removed. Works with any router bit you supply that has an overall length of at least 2-1/2" and a maximum diameter of 2-1/2". Our optional 13600 upshear router bit leaves a great surface finish, has a 1-1/2" cutting diameter, a 5/8" cutting length, a 2-1/2" overall length and a 1/2" shank. Router not included..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

3-1/2\ To 4-1/2\ Universal Fence Clamp 2 Pack

  • Our 525 Large Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 10" wide. Heavy duty 1/2" phenolic base (15-3/4" x 15-3/4") will not distort from clamp pressure..
  • Features one 500 lb. Outboard Toggle Clamp and two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 24” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Router line Storage Box Power Cord Socket Sorting Box Set-top Box Rack

  • Our 526 Medium Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locatons for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (11-5/8" x 11-3/4") will not distort from clamp pressure..
  • Features two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Phonleya WiFi Router organize Box Set-Top Box Rack Patch Panel Storage Shelf Hider Cord Management Container Storage Box for Desktop

  • Our 528 Small Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (7-5/8" x 11-5/8") will not distort from clamp pressure..
  • Features one 500 lb. Inboard Toggle Clamp. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

Router Table Spline Jig – Router Jigs and Templates for Small Boxes, Frames – Router Sled Holds Workpiece at 450 Angle - MDF Base w/ABS Sled Box Joint Jig - Fits Standard 3/8'' x 3/4'' Miter Slot

  • Router Table Corner Spline Jig: Dress up your mitered corner joint and add strength too, with the Rockler router table spline jig! Fits standard 3/8'' x 3/4'' miter slot..
  • Holds Your Workpiece: This clever router jig locks into a standard router table miter slot. The splining jig features a sled that holds your workpiece at a 45° angle while you guide it smoothly past the router bit..
  • Ideal For? This box joint jig for the table saw is ideal for use with smaller boxes and frames, making it easy to add a wide variety of strong, beautiful splines to the corners..
  • Adjustable Fences: The adjustable router table woodworking fences act as stops to position your workpiece.
  • one setting can cut all four slots for a frame or eight slots for a box. All adjustments are achieved with tool-free knobs..
  • Multipurpose Usage: Try different router bits to achieve different effects: straight bit, V-groove bit, dovetail bit, and more!.
Check Stock

Woodpeckers Basic Slab Flattening Mill Great for DIY Live Edge Slab Tables With Router Sled Slab Clamping Dogs & Rails

  • MAKE YOUR OWN SLAB TABLES: With the Woodpeckers Basic Slab Flattening Mill you can now use your router to flatten slabs right in your own shop faster....
  • NICE CAPACITY: The Basic Slab Flattening Mill capacity is 38” x 57”..
  • INCLUDES: Includes (2) 72" rails, (2) 48" rails, (1) router sled, (4) Slab Clamping Dogs and all assembly hardware. Does not include plywood or MDF....
  • BUILT IN USA: This Woodpeckers product is proudly built in the USA..
Check Stock

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4″ x 3/8″).

  • Kit contains: Our crosscut sled kits come in red- 3/4″x3/8″x36″ 2 pcs.
  • white- 3/4″x3/8″x19″ plus 1 foot primary color T-track, 2 pcs.
  • white- 3/4″x3/8″x48″ 2 pcs. Make your crosscut sled any size for your table saw and cutting requirements..
  • High Quality Material: UHMW is a linear polyethylene with a molecular weight of 3,000,000 to 6,000,000. Thus, it is ten times heavier than regular high density polyethylene, and extremely durable for extensive use..
  • Smooth & No Residue: UHMW bars produce less friction than wood, perfect for runners for crosscut sleds. Furthermore, UHMW doesn’t expand or contract like wood during extreme weather changes. Each bar measures 3/4″ x 3/8″, fitting most standard table saw slots. Unlike wooden bars, UHMW bars are slick, leaving no residue, dust, or shavings behind..
  • Outstanding Impact Strength: With outstanding impact strength even at low temperatures, our crosscut sled kits are ideal for jigs, fixtures, or 3/4″ x 3/8″ miter grooves on table saws, bandsaws, or router tables..
  • Please note: UHMW poles tend to bend during shipping but are easily adjusted..
Check Stock

Woodpeckers Extended Slab Flattening Mill Great for DIY Live Edge Slab Tables With Router Sled Slab Clamping Dogs & Rails

  • MAKE YOUR OWN SLAB TABLES: With the Woodpeckers Extended Slab Flattening Mill you can now use your router to flatten slabs right in your own shop....
  • HUGE CAPACITY: The Extended Slab Flattening Mill adds an additional pair of 72" rails that can either replace the cross rails to increase width, or....
  • INCLUDES: Includes (4) 72" rails, (2) 48" rails, (1) router sled, (4) Slab Clamping Dogs and all assembly hardware. Does not include plywood or MDF....
  • BUILT IN USA: This Woodpeckers product is proudly built in the USA..
Check Stock

18” Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds, Jigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots

  • Build your next table saw sled, router table jig or band saw fixture to operate with a smooth sliding action using the Fulton 18 inch Precision Steel Miter Bar! Attach the steel bar to most any type of sled, jig or fixture that is to be used with a 3/4 inch (19mm) by 3/8 inch (9mm) miter slot. Using our steel bar versus plastic or aluminum gives your sled, jig or fixture more strength and stability and it won’t bend or warp..
  • When building sleds, jigs and fixtures one of the most important aspects is to achieve a smooth sliding action without side to side play. The Fulton Precision Steel Miter Bar does both with its solid steel bar and 4 adjustable spring loaded plungers. The plungers can be adjusted with the included hex key wrench for just the right fit..
  • Not only is the Fulton Steel Miter Bar adjustable, its easy to mount! You can mount the bar from the top of your sled, jig or fixture platform or base, or you can mount it from the bottom. There are three threaded holes along the length of the bar for mounting the bar using 1/4 inch by 20 tpi machine screws (not included). There are also three counter sunk holes on the bar to mount the bar using #8 wood screws (not included)..
  • Once you mount the bars to your sled, jig or fixture you are sure to fee....
Check Stock