Best Roughing And Finishing Cutters

OSCARBIDE 5/8\Shank 7 Pieces/Set Indexable Lathe Turning Tool Holder,CNC Metal Lathe Tools Heavy-Duty for Turning Grooving Threading Nickel Plated Cut Off Set, Tin Coated Carbide Inserts

OSCARBIDE 5/8" Heavy-Duty Turning tool set including 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external lathes turning holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder.
Turning Holders are made of high quality steel with Nickel Cotated, Cutters are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use.
Metal Lathe Cutting Tools Used for semi-finishing/roughing steel, Metal,Fit for Turning,grooving or threading.
Replacement Cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it..
7pcs lathe cutting tool holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry.

3/8"Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20,6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S06M-SCLCR Boring Bar.
Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
Replacement inserts of this kit , please search the Asin of this item: B0875TPL4Y on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry.

Shank Diameter: 5/8''. Overall Length: 8''. Min. Bore: 0.866''..
Boring from light roughing to finishing in small bores. Insert CCMT 32.51 Included & Key Included.
Accepts Inserts CCMT 32.51 and CCMT 32.52. Profiling bar for semi-finishing and finishing operations.
Bar hardness approximately 45HRC. Extreme gloss finish.
Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.

1/2” Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S08M-DCLCR Boring Bar.
Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general holders.
Carbide Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
Lathe turning tool holders Suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
Replacement inserts of this kit , please search the Asin of this item:B0BHWBR7V8 on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry.

Profiling bar for semi-finishing and finishing operations.
Boring from light roughing to finishing in small bores.
Using 80 degree carbide WNMG inserts negative 5 degree end and side cutting angle.

....When the carbide cutter finally dulls, simply loosen the screw that holds the cutter in place, rotate the cutter to a sharp, clean edge and then secure the cutter by tightening the screw..
【 Perfect for Professional Carpenters and Beginners】：This is a free combination suit that meets the needs of roughing and finishing cutting, suitable for both professional carpenters and beginners..
【Exteremely Professional】5 different sizes and 4 different shapes carbide inserts satisfy all you demand:Square With Radius (15x15x2.5mm-R50),Square(15x15x2.5mm-4R0.5), Square(14x14x2mm)Diamond Shaped (10mm X 28mm X 2.5mm with Round Point) Round (Ø16mm*3mm-30°).
【Set includes the Cutters only】: Square Cutter *2(Supplied with M6-8 replacement screws ),Square With Radius Cutter*1(Supplied with M6-8 replacement screws ), Round Cutter*1(Supplied with M5-8 replacement screws ), Diamond Shaped Cutter*1(Supplied with M4-8 replacement screws )..

Grade for uncoating, gray color surface polishing process can reduce accumulation of debris, obtain higher surface quality.
Size(I.W): 12.7mm, Thickness(S): 4.76mm, Dimension(Φd): 5.16mm, Radius(R): 0.4mm.
Suitable for Aluminum, magnesium, copper, brass, plastic, wood finishing to roughing processing.
Peripheral machine grinding and surface gloss non-stick, professional aluminum cutting and suitable N01-N15..
Has more than 15 years of experience in producing carbide inserts, long processing life, it is good at finishing cutting..

... Cost-Effective: Coming with 6pcs of the 3-Flute Square End Mill, Shank Diameter: 1/4’’ (6.35mm), Cutting Diameter: 5mm/6mm , Cutting Length: 15mm/20mm, Overall Length: 50mm/55mm..
Versatile: Surface finishes are greatly improved no matter if you are roughing or finishing due to effective chip removal.
Cut faster thanks to superior Material Removal Rate (MRR) especially when slotting..
Applicable Materials: High feed U-type design makes these cutters ideal for working with aluminum and copper alloy.
Attain excellent production rates thanks to the strong tooth with double relief angles..
Wide Compatibility: Genmitsu SN06A Square End Mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device..

Shank Diameter: 1". Overall Length: 12". Using 80 degree carbide CCMT inserts negative 5 degree end and side cutting angle.
Boring from light roughing to finishing in small bores. Insert CCMT 32.51 or CCMT32.52 Included & Key Included..
Accepts Inserts CCMT 32.51 or CCMT32.52. S16T-SCLCR4. Profiling bar for semi-finishing and finishing operations.
Bar hardness approximately 45HRC. Extreme fine gloss finish.
Negative 5 degree end & side cutting angle. Positive 80 degree diamond CCMT inserts.