Best Rotating Screw Actuators

DuraSteel TZ-6003 Heavy Duty Commercial Door Micro Switch with Vertical Roller Plunger for Roll-up Door/Push & Pull Door - Fits for Aerial Awoco Maxwell Pioneer Welbon or Mars Air Curtains

Built-in CM miniature limit switch, strong aluminum cast shell, design for water-proof and oiled proof..
It is the same as CM Micro Switch in the rated value and characteristics..
Various of actuators that are taken convenience for using. 220V/110V @ 15A.
Each switch is equipped with cable fixator, including rubber boot, metallic waster, plastic screw nut..
Model #: TZ-6003I/Part #: TZ-6003, Roller Plunger is easier than none roller plunger switch for Air Curtains Door Access..

Check Stock

Baomain TZ-6 Sealed Limit Switch TZ-6001 AC 250V 15A Plunger Only for Push & Pull Door/Roll-up Door - Fits for Maxwell Pioneer Aerial Awoco Mars Air Curtains and Welbon IP65 CE Listed

Built-in TM miniature limit switch, strong aluminum cast shell, design for water-proof and oil-proof.
It is the same as TM micro switch in the rated value and characteristics.
Various of actuators that are taken convenience for using.
Each switch is equipped with cable fixator, including rubber boot, metallic washer, plastic screw nut.
M20x1.5 cable gland that can be equipped.

Check Stock

STOP BOX AR-15 Chamber Lock - Red

Secure, Quick, & Reliable Access When You Need It Most - Specifically designed rapid access finger code lock to prevent tampering and quick access to others while your gun is at the ready.
No batteries, electronics, or keys needed - The AR-15 Chamber Lock uses five actuators located on the corner of the enclosure for fast and easy indexing. Your hand creates the key that positions these actuators in the correct alignment to unlock the chamber lock.
100% Satisfaction Guaranteed and Lifetime Warranty - If you're not satisfied for any reason, you may return your order for a full refund within 30 days.
Made in the USA - Made from 6061 T6 Aluminum with Type II and Type III Hard Anodized allowing it to be extremely lightweight and durable.

Check Stock

BonyTek 6 Foot Flagpole Kit for American Flag, Metal Flag Pole with Flag Holder and Rings for Residential House Yard Garden Commercial (Black)

Adjustable Length: BonyTek flagpole kit comes with four 1.3ft adjustable and removable flagpoles and two rotating rings. You can adjust it from 1.3ft to 6ft depending on the size of the flag. Suitable for 2*3ft, 3*5ft, 4*6ft flags..
Thicken Flagpole & Lengthen Screws: Made of heavy-duty stainless steel, the thickness of the flagpole is thickened from 0.38mm to 0.45mm, which is more durable and will not bend, break or warp. The screw of bracket is also lengthened from 30mm to 41mm, making better fixed on the wall and sturdy for outdoor use..
Tangle-free Accessories: The flag pole is equipped with two rotating rings and two-position bracket. Keep the flag fluttering in the wind smoothly without tangle with different position as you like..
Easy Installation: Flagpoles with threaded joints can be installed without tools. Just rotate and twist the flagpoles and then adjust the position of the rings according to the flag size to complete the installation. Suitable for house, yard, garden, residential, commerical and so on..
Package Include- 4* silver splice flagpoles (40cm per pole), 1* silver flagpole head, 2* white plastic flagpole rings (1 inch), 1* aluminum flagpole base, 3* screw kits (screw length 41mm), 1* flagpole fixed screw.

Check Stock

BonyTek Flag Pole Kit for American Flag, 5ft Flagpole with Bracket and Rings, Stainless Steel Wall Mounted Flag Poles for House Yard Garden Outdoor Residential or Commercial (Silver)

Adjustable Length: BonyTek flagpole kit comes with four 1.3ft adjustable and removable flagpoles and two rotating rings. You can adjust it from 1.3ft to 6ft depending on the size of the flag. Suitable for 2*3ft, 3*5ft, 4*6ft flags..
Thicken Flagpole & Lengthen Screws: Made of heavy-duty stainless steel, the thickness of the flagpole is thickened from 0.38mm to 0.45mm, which is more durable and will not bend, break or warp. The screw of bracket is also lengthened from 30mm to 41mm, making better fixed on the wall and sturdy for outdoor use..
Tangle-free Accessories: The flag pole is equipped with two rotating rings and two-position bracket. Keep the flag fluttering in the wind smoothly without tangle with different position as you like..
Easy Installation: Flagpoles with threaded joints can be installed without tools. Just rotate and twist the flagpoles and then adjust the position of the rings according to the flag size to complete the installation. Suitable for house, yard, garden, residential, commerical and so on..
Package Include- 4* silver splice flagpoles (40cm per pole), 1* silver flagpole head, 2* white plastic flagpole rings (1 inch), 1* aluminum flagpole base, 3* screw kits (screw length 41mm), 1* flagpole fixed screw.

Check Stock

BonyTek Flag Pole Kit, 6ft Flagpole for American Flag, Stainless Steel Wall Mounted Flag Poles with Bracket and Rings for House Yard Garden Outdoor Residential or Commercial (Silver)

Adjustable Length: BonyTek flagpole kit comes with five 1.3ft adjustable and removable flagpoles and two rotating rings. You can adjust it from 1.3ft to 6ft depending on the size of the flag. Suitable for 2*3ft, 3*5ft, 4*6ft flags..
Thicken Flagpole & Lengthen Screws: Made of heavy-duty stainless steel, the thickness of the flagpole is thickened from 0.38mm to 0.45mm, which is more durable and will not bend, break or warp. The screw of bracket is also lengthened from 30mm to 41mm, making better fixed on the wall and sturdy for outdoor use..
Tangle-free Accessories: The flag pole is equipped with two rotating rings and two-position bracket. Keep the flag fluttering in the wind smoothly without tangle with different position as you like..
Easy Installation: Flagpoles with threaded joints can be installed without tools. Just rotate and twist the flagpoles and then adjust the position of the rings according to the flag size to complete the installation. Suitable for house, yard, garden, residential, commerical and so on..
Package Include- 5* silver splice flagpoles (40cm per pole), 1* silver flagpole head, 2* white plastic flagpole rings (1 inch), 1* aluminum flagpole base, 3* screw kits (screw length 41mm), 1* flagpole fixed screw.

Check Stock

WindyNation Linear Actuator or DC Motor Power Supply + DPDT Wireless Remote Control Switch + Double Adapter Cable

Includes Power Supply, Remote Control Unit, Double Adapter Cable (for connecting two linear actuators or DC motors), and additional Connection Cables.
Can wirelessly control two 12 volt DC Motors or two linear actuators (5 amps maximum). The remote control is a DPDT switch (Examples: Up-Stop-Down or....
Power Supply Specs: AC INPUT RANGE: 100-240 VAC DC OUTOUT: 12 VDC (5 amps maximum) ADDITIONAL INFO: 8ft AC extension cord included and 5ft DC....
Remote Specs: POWER RATING: 5 amps REMOTE RANGE: 90ft maximum FREQUENCY: 433.92 Mhz OPERATING CURRENT: 15mA SWITCH TYPE: DPDT ON-OFF-ON.
Simple Installation: The included connectors allow for a quick and simple installation of the power supply and remote receiver..

Check Stock

WindyNation 2pcs 12 Volt 225 lbs Linear Actuators + Wireless Remote Control DPDT Switch + Actuator Mounting Brackets + Wiring & Connectors

Includes 2pcs of 12V, 225 lbs Linear Actuators (multiple stroke lengths available) with Mounting Brackets, Remote Control Unit, and Wire with Locking....
No power supply is included. This option is ideal for customers who already have their own power supply (e.g. 12 volt car battery ).
See photo gallery for linear actuator specifications and a wiring schematic for the entire system. Extremely easy to wire and assemble using the....
Remote Specs: CURRENT RATING: 5 amps REMOTE RANGE: 90ft maximum FREQUENCY: 433.92 Mhz OPERATING VOLTAGE: 10-30 vdc (suitable for 12 and 24 volt....
Complete kit allows end user to remotely control the movement of their linear actuators. (Power supply is NOT included. Other variations in this....

Check Stock

ISSYAUTO Gas Cap Holder Compatible with 2016-2023 Tacoma 3rd Gen Fuel Cap Holder, Black

【Patented Design】Gas cap holder compatible with 2016-2023 Tacoma 3rd Gen. ISSYAUTO Patented Design Holder provides another way to secure the gas cap while fueling your vehicle.
【Function】Unscrewing the gas cap to hold it on the fuel cap Holder, to avoid hitting the side of your truck. helps to keep clean of your truck and gas..
【Switch Style Design】Turn to the left to remove, turn to the right to lock. Contrast the round hole design, which can effectively avoid the gas cap dropped and Stuck from the gas cap holder..
【Anti-Slipping】According to the rotating thread of the gas cap to set the fixed point, and the gas cap can be easily locked by rotating it without slipping off..
【Easy Installation】Take out the screw of the fuel tank door, make the gas cap holder's little indentation slip into the lip of the fuel tank door, then reinstall the screw..

Check Stock