Best Roofing Connectors

Edge Right - Raised Garden Bed Kit - COR-Ten Steel (14\ COR-Ten Steel, 2 FT x 4 FT)

Easy-to-install—literally just pounds into the ground via serrated teeth that slice the earth nicely and securely.
Unlike wood or the cheap roofing steel used in competing products, COR-TEN steel is hearty and impervious to weather, pests, and other elements.
All parts and components including panels, strips, and connectors, are made of 14 gauge COR-TEN steel.
Ages beautiful to a nice, rustic, patina that complements mulch and rocks.
The lifespan of the product makes it a cost-effective option since it rarely needs replacing.

#12 Metal to Metal #3 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust resistant.
Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
#12 - 3 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
Coarse Threaded Type 3 Screws generally used in thinner or lighter steel or aluminum products.

#12 Metal to Metal #5 Roofing Screws with Drill Point tip. 5/16" Hex Head, 9/16" Washer.
250 COUNT Metal-to-Metal Galvanized Zinc roofing screws are a natural gray color & rust.
Hex washer head, drill point roof screw with EPDM washer seal, seals roofing panel to screws..
#12 - 5 Metal to Metal Screw is designed for attaching roofing & wall panels to steel buildings.
Fine Threaded Type 5 Screws is designed to work in thicker materials rated from 3/8" to 1/2".

#12 Sheet Metal ROOFING SCREWS. Sharp Point ReGrip Screws. 5/16" Hex Head, ~9/16" Washer.
250 COUNT Metal-to-wood roofing screws are galvanized and zinc coated to prevent rusting.
Hex washer head, sharp point roof screw with EPDM washer seal, seals roofing panel to screws..
Corrugated roofing and corrugated siding screws for pole barns, storage shed, shops, etc..
Galvanized Screw is Non-Painted and gets it's Color from the Galvanizing Process and is natural gray.

1 - 4 gallon pail of ROOFING latex Bonding Adhesive, covers 350 sq. ft. Trowel application is the recommended application as per the instructions as a ONE surface WET LAMINATE. However, if you wish to use a paint roller, we recommend using a 9" fine nap paint approved roller. If you use the roller, and not a trowel, you need to put the adhesive on BOTH surfaces and let TACK dry for 5 minutes or so, like a 2 sided solvent contact adhesive, depending on weather and heat conditions..
Used to adhere construction roofing membrane to surface, Not recommended to be used in temperatures lower than 50*. Temperature needs to be above 50* for 24 hours for full cure..
Latex NON HAZ MAT Bonding Adhesive. Top Quality. 100% FULL REFUND GUARANTEE.
Bond EPDM, TPO, and PVC Roofing to Wood, OSB, Plywood, Metal and BUR Roofing.
Use as a SINGLE surface wet laminate adhesive to bond your roofing membrane to the substrate. This is a BONDING Adhesive to adhere or bond the EPDM or TPO to a substrate of wood, plywood, OSB or metal. This is NOT a seaming product that will seam EPDM to EPDM or TPO to TPO, you must use a SEAMING product like black seaming adhesive or vulcanizing seaming tape which we have available for that type of application..

Dimensions: 5/16" Hex Head and ~9/16" EPDM washer - Shaft is .242" (#14) - Length under head 1-1/2".
Polyurethane coated screw head is painted to closely match many brands of metal roofing (color may vary).
#14 Sheet Metal roofing screws are galvanized for corrosion resistance.
Sharp T17 type point securely fastens metal roofing to wood structures quickly and easily.
For installing roofing on a house, porch, airplane hangar, shed, pole barn, shop, barn or lean-to.

...Arborist, Window Washer, Gutter Cleaning, Roofing, Search and Rescue..
SAFETY HARNESS - The KwikSafety SCORPION Full Body 3D Ring Safety Harness supports users within the capacity range of 130 to 310 pounds (59 to 140 kg). To ensure proper fit, ensure that all pass-through connectors are connected and aligned, leg and shoulder straps are snug, and chest straps are in the center of the chest area..
SAFETY LANYARD - The 6’ internal shock-absorbing lanyard makes the SCORPION a more lightweight fall protection device. A dual-action, double-locking snap hook prevents accidental rollout while remaining easy to latch on to your anchor point. Tensile strength (max load) for the snap hook is rated at 5,000 pounds with a gate strength of 3,600 pounds. Meets American National Standards Institute (ANSI) Z359.12 standards..
CROSS ARM STRAP (ANCHOR) - 3 foot long pass thru web anchor | Worker capacity is 310 lbs | Min. breaking strength is 5000 lbs | Anchorage equipment for a single user | The GIBBON GRIP cross arm strap is a premium fall protection tool / anchor strap with a large d ring connector | The perfect high rise guardian watc....