Best Roller Door Operator

639T Allstar 9-Channel Commercial Door Control with Open/Close/Stop by Linear

  • Quantity: 1 (one) Linear 639T Open Stop Close Stationary Transmitter The Model 639T 3-Button, 9-Door, Open-Close-Stop, Stationary Transmitter is designed for commercial automatic door and gate operator applications. This transmitter can operate multiple receivers connected to multiple operators..
  • The transmitter has three buttons for Open, Close, and Stop commercial operator functions and a rotary switch to select which receiver/operator to control. The three operation pushbuttons have a surrounding bezel to shield them from accidental activation. The Stop button is colored red for easy identification. Up to nine 3-channel commercial door or gate receivers can be independently controlled by the 639T transmitter..
  • The Model 639T is compatible with 831R, 831RJ, MVP-3CH-24V-3T-4W, MVP-3CH-12V-8W-FC, MVP-3CH-24V-8W-FC, MVP-RE-24V-8W-FC, and MVP-MR 3-Channel receivers used in Open, Close, Stop applications..
  • Features Compatible with 3-channel Allstar and MVP receivers Stationary mounting Easy access to battery and coding switch Power: 9-volt battery Codes: 6561 (set by eight trinary dip switches) RF frequency: 318 MHz Dimensions: 3.625" W x 6.625" H x 2.375" D.
Check Stock

Eagles 2\ Nylon Garage Door Roller Rotate Quite Garage Roller Steel Garage Door Hardware Accessories, White 4\ Stem 12 Pack

  • 1.High Quality Garage Door Roller: We are the factory that produces the rollers, there are special quality inspection department personnel, each garage roller is sent to the customer after quality inspection.
  • 2.Sturdy and Practical Garage Roller: Typically referred to as a 2" roller is the standard sized roller used in over 99% of all garage doors,suitable for all residential and light commercial doors 2" tracks.
  • 3.Easy to Install: Installation was easy, under five minutes per roller. Slightly bend track at seam to remove, replace roller, and move door to do next roller.
  • 4.Quite Garage Door Roller: Nylon garage door rollers are softer, quieter and smoother than plastic or metal rollers. When the new roller is replaced, The opening and closing of the garage door will be quieter and smoother.
  • 5.After-sales Guarantee: Quickly to reach 100% is our pursuit of the direction of efforts. If you are dissatisfied with any of the goods that you received,we accept the full refund unconditionally within one months.
Check Stock

Eagles Nylon Garage Door Roller 2\ Reinforced Dual Cage Garage Door Roller Sealed Bearing Rotate Quiet and Durable, 4\ Stem 1 Pack

  • 1.High Quality Garage Door Roller: We are the factory that produces the rollers, there are special quality inspection department personnel, each garage roller is sent to the customer after quality inspection.
  • 2.Sturdy and Practical Garage Roller: Typically referred to as a 2" roller is the standard sized roller used in over 99% of all garage doors,suitable for all residential and light commercial doors 2" tracks.
  • 3.Quite Garage Door Roller: Nylon garage door rollers are softer, quieter and smoother than plastic or metal rollers. When the new roller is replaced, The opening and closing of the garage door will be quieter and smoother.
  • 4.Easy to Install: Installation was easy, under five minutes per roller. Slightly bend track at seam to remove, replace roller, and move door to do next roller.
  • 5.After-sales Guarantee: Quickly to reach 100% is our pursuit of the direction of efforts. If you are dissatisfied with any of the goods that you received,we accept the full refund unconditionally within one months.
Check Stock

Liftmaster Garage Door Opener Replacement Circuit Board for Security+ Systems

  • Replacement Logic/Circuit board (receiver board) for ALL Security+ operators (no light socket)..
  • For Liftmaster garage door opener operator models 985, 1240R, 1245R, 1246R, 1255R and 1256R. For Chamberlain garage door opener operator models 4200, 2200 and 1200..
  • Replaces logic board models 41A5021-1, 41A5021-1B, 41A5021-1C, 41A5021-1D, 41A5021-1E. Compatible with Security+ systems from Chamberlain, Craftsman,Master Mechanic, Sears & Wayne Dalton..
Check Stock

(6) Garage Door 2\ NYLON ROLLER Wheel w/ Cap 7\ Shaft 13 Ball Bearing Sealed by The ROP Shop

  • Specs - Roller Diameter: 1 13/16" for a 2" track. Stem Length: 4" (3.75" from bevel). Stem Diameter: 7/16". Single Load: 75 lbs. Ball Bearings: 13. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Includes - (1) Sealed Nylon Garage Door Roller.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed precision ball bearing with backside protective dust shield. Plus double plating thickness on stem is designed for max performance and ultra-life weather protection. Garage door roller rated for up to 20,000 cycles on a 12' door.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

Tacony Titan TC6000.2 Commercial Upright Vacuum Cleaner with On Board Tools, Gray

  • Ergonomic light-weight (1.5 lbs) handle will increase operator comfort and productivity..
  • Hospital-grade S-class filtration can trap 99.6 percent at 0.3 microns for greatly improved indoor air quality..
  • Versatile on-board tools and extension wand make Sensor S-12 ideal for detail cleaning..
  • Sensor S-12 protects itself against damage whenever bag is full or clogged..
  • Brush roller indicator light alerts operator when brush height is set incorrectly..
Check Stock

The ROP Shop | 2\ Nylon Garage Door Roller with 4\ Stem & 11-Ball 6200ZZ Precision Bearing

  • The ROP Shop replacement 2" White Nylon Roller with 6200ZZ Bearing Offer Softer, Quieter Garage Door Use.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

The ROP Shop | (Pack of 2) 2\ Nylon Rollers with 6200ZZ Bearing Offer Quieter Garage Door Use

  • The ROP Shop replacement 2" Nylon Roller with 11-Ball Bearing for Residential & Commercial Garage Door.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(12) Garage Door 2\ Nylon Roller 4\ Stem 11 Ball Bearing Smooth Quiet Heavy Duty by The ROP Shop

  • The ROP Shop replacement 2" Nylon Garage Door Roller with 4" Stem & 11-Ball 6200ZZ Precision Bearing.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock