Best Rockville Rcm03

Rockville PC Gaming Streaming Twitch Bundle RCM03 Microphone+Headphones+Boom Arm

  • Package Includes: (1) RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. (1) RockvilIe DMS40 40" Microphone Boom Arm Studio Podcast USB Mic Stand+Desk Clamp. (1) RockvilIe PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad. RCM03 Condenser Microphone (made of aluminum!). 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device. 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power.
  • Metal shock mount. Metal Anti-wind foam cap. Owners Manual. Warranty card. Features: RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. Aluminum high quality construction. Polar Pattern: Internally Polarized Condenser Cardioid Design. Large diaphragm for smooth, natural sound and low noise. Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer).
  • Uni-directional. Sensitivity: -27dB2dB(0dB=1V/Pa at1kHZ). Output impedance: 2000%(at 1kHz). Standard operating voltage: 3V. Operating voltage range: 1.5V-10V. Current consumption: less than 500uA. Voltage deduction characteristic: within 3dB at 2V. S/N ratio: More than 24dB. Frequency Resp....
Check Stock

Rockville RCM02 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount

  • Rockville RCM02 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. Aluminum high quality construction..
  • Polar Pattern: Internally Polarized Condenser Cardioid Design. Large diaphragm for smooth, natural sound and low noise..
  • Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your. mixer or can connect to your laptop or computer)..
  • Uni-directional. Sensitivity: -29dB±2dB(0dB=1V/Pa at1kHZ). Output impedance: 200Ohm±30%(at 1kHz). Standard operating voltage: 3V..
  • Operating voltage range: 1.5V-10V. Current consumption: less than 500uA. Voltage deduction characteristic: within 3dB at 2V. S/N ratio: More than 24dB..
Check Stock

Presonus Bluetube DP V2 2-Channel Tube Mic Pre-Amp DP2+Mic+Shockmount+Headphones

  • Package Includes: (1) Presonus Bluetube DP V2 2 Channel Tube Mic Pre-Amp. (1) RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. (1)RockvilIe PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad. Features of Bluetube V2: Dual path, with both 12AX7 vacuum tube and solid-state gain stages. Combo mic/instrument inputs with Class A XMAX mic preamplifiers. Tube Drive tube-saturation control. Illuminated analog VU input-level meter.
  • Compact 1/2U rack-mount chassis. Dual path, with both 12AX7 vacuum tube and solid-state gain stages. Combo mic/instrument inputs with Class A XMAX mic preamplifiers. XLR and line outputs. Tube Drive tube-saturation control. 48V phantom power. 80 Hz high-pass filter. -20 dB pad. Polarity-reverse switch. Illuminated analog VU input-level meter. Compact 1/2U rack-mount chassis. Bluetube V2 Manual English (PDF). RCM03 Condenser Microphone (made of aluminum!).
  • 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc. 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power. Metal shock mount. Metal Anti-wind foam cap. Owners Manual. Warranty card. Features: RockvilIe RCM03 Pro Studio ....
Check Stock

YAMAYDAY RCM Jig, RCM Clip Short Connector Plastic RCM (Recovery Mode) Clip NS SX PRO OS Crack Tools for Nintendo Switch Archive Modification

  • RCM Jig for Nintendo Switch. This is not a 3D-Printed paper clip jig.
  • Allows you to enter into RCM(Recovery Mode) on your Switch.
  • Can be used to modify the archive, play GBA / FBA and other simulators, the homemade system can already load Switch games.
  • Easy to use and install. Connect your RCM Jig to the Right-Hand Joycon rail of switch. Then hold VOL press the Power Button. The RCM template reduces the risk of damage to the Joycon terminals on the switch..
  • Comes in a good carrying case to keep it safe when not in use. Please feel free to contact us if you have any problems.
Check Stock

PUREBURG 4-Pack Replacement Humidifier Wick Filters Compatible with Relion WF813 Relion RCM832 RCM832N RCM-832N DH832 DH-832 Duracraft DH-830 Honeywell HC832 Robitusin DH-832 ProCare PCCM-832N AC813

  • ✅Compatible with Relion WF813 Fits Relion RCM832 RCM-832 RCM832N RCM-832N DH832 DH-832 Duracraft DH-830 HC832 Robitusin DH-832 ProCare PCCM-832N AC813 PCWF813 Humidifiers.
  • ✅This Wick filter is robustly built with premium matieral with an extra outer net to keep the wick stand and sturdy.
  • ✅Please replace your filter every 30~60 days to keep your air fresh and clean..
  • ✅Please Use Ctrl+F to Search for Your Model Number (Model #) or Part Number (PN) below.
Check Stock

RCM Jig, RCM Clip Tool Short Connector for Nintendo Switch Joy-Con Jig Dongle for NS Recovery Mode, Used to Modify the Archive, Play the Simulator(Red)

  • This product is a tool, RCM Jig for Nintendo Switch. This is not a 3D-Printed paper clip jig. After specially modified to play games and other home-made software. Used to modify the archive, play the simulator such as GBA/FBA..
  • Connect your RCM Jig to the Right-Hand Joycon rail of switch. Then hold VOL press the Power Button. The RCM template reduces the risk of damage to the Joycon terminals on the switch..
  • Allows you to enter into RCM(Recovery Mode) on your Switch..
  • Made of ABS plastic, durable. Easy to use and install..
  • If you have any questions, please feel free to contact us. We will give you a satisfactory answer..
Check Stock

RCM Jig, RCM Clip Tool Short Connector for Nintendo Switch Joy-Con Jig Dongle for NS Recovery Mode, Used to Modify the Archive, Play the Simulator(Black)

  • This product is a tool, RCM Jig for Nintendo Switch. This is not a 3D-Printed paper clip jig. After specially modified to play games and other home-made software. Used to modify the archive, play the simulator such as GBA/FBA..
  • Connect your RCM Jig to the Right-Hand Joycon rail of switch. Then hold VOL press the Power Button. The RCM template reduces the risk of damage to the Joycon terminals on the switch..
  • Allows you to enter into RCM(Recovery Mode) on your Switch..
  • Made of ABS plastic, durable. Easy to use and install..
  • If you have any questions, please feel free to contact us. We will give you a satisfactory answer..
Check Stock

GreenR3 4-Pack Replacement Humidifier Wick Filters for Relion WF813 Fits Relion RCM832 RCM-832 RCM832N RCM-832N DH832 DH-832 Duracraft DH-830 Robitusin DH-832 ProCare PCCM-832N AC813 PCWF813 Protec

  • Compatible with Relion WF813 Fits Relion RCM832 RCM-832 RCM832N RCM-832N DH832 DH-832 Duracraft DH-830 HC832 Robitusin DH-832 ProCare PCCM-832N AC813 PCWF813 Humidifiers.
  • This Wick filter is robustly built with premium matieral with an extra outer net to keep the wick stand and sturdy.
  • Please replace your filter every 30~60 days to keep your air fresh and clean..
  • Please Use Ctrl+F to Search for Your Model Number (Model #) or Part Number (PN) below.
Check Stock

RCM Jig, RCM Clip Short Connector for Nintendo Switch Joy-Con RCM Tool for NS Recovery Mode (Black)

  • 1. RCM Jig for Nintendo Switch. This is not a 3D-Printed paper clip jig.
  • 2. Allows you to enter into RCM(Recovery Mode) on your Switch.
  • 3. Can be used to modify the archive, play GBA / FBA and other simulators, the homemade system can already load Switch games.
  • 4. Easy to use and install. Connect your RCM Jig to the Right-Hand Joycon rail of switch. Then hold VOL+ press the Power Button.
  • 5. Comes in a good carrying case to keep it safe when not in use. Please feel free to contact us if you have any problems.
Check Stock