Best Rmr Mount Glock

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith.
The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO(Screws provided for Trijicon and ADE). Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..

...n MP C.O.R.E, CZ P10F/10C optics ready, Walther Q5 Match and Springfield XD/XDM/XDS OSP, Canik TP9 SFX/Combat, FN 509/45 Tactical, Shadow Systems MR 920 using pistol manufacturer provided plate marked for Trijicon RMR footprint..
Those name brand pistol manufacturer made "Optics Ready" handguns all come with several mounting plates/optic cuts marked for different brands of red dots, such as for Trijicon RMR, Shield RMS and Vortex Venom red dot footprint. The Valkyrie fits one of the pistol manufacturer provided plate marked that is compatible with Trijicon RMR..
ADE Valkyrie created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a "back up iron sight" to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight..
For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacture equipped rear sight, ADE Valkyrie's rear white dot acts as a pistol factory original rear sight for Co-Witness.
4 MOA GREEN Dot. Comes with a picatinny mounting plate and a pair of screws. This red dot does NOT comes with any other optic plate to mount on an specific pistol.

This kit includes the sealing plate and proper screws needed to mount an RMR on the MOS and Springfield OSP slide.
Fits G17 Gen4 MOS, G19 Gen4 MOS, G34 Gen4 MOS , G35 Gen4 MOS, G40 Gen4 MOS, G41 Gen4 MOS, and Springfield OSP.
The AC32064 kit includes: RMR Sealing Plate, two RMR Screws (short) and Hex Key.
One must have this kit to mount an RMR on a MOS slide - RMRs ship with two long screws which will NOT work.
You will need the two short screws in this kit.

6061 Aluminum Construction,Anodized Black Finish.
2 set Screws Included: (2) 4-40 flat head screws.
Allows for easy removal and replacement for any Trijicon RMR that is removed periodically for usage.

Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34. It does NOT fit standard glock, or glock with a aftermarket slide.If you have....
fits directly to "Optics Ready" pistols such as Glock MOS, Springfield OSP(non-hellcat), Canik TP9 SFX(non elite sc), Walter PPQ Q5 Match, FNX 45....
5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included). Waterproof..
Comes with a picatinny mounting plate pre-assembled.Please use the allen wrench provided to take out the 2 hex screws on the top behind the glass....
This ADE red dot is NOT compatible with optic plate/slide/cut for trijcon rmr/Shield/Holosun 407 type footprint. It only compatible with footprint....

Compatible Guns: All Glock models except MOS verions.
Compatible Red Dot Sights (Mounting Screws INCLUDED): Trijicon RMR, Doctor, Insight MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 & 3, CMORE RTS & STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS (additional screw purchase required), Holosun 407/507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1272.

Precision CNC Machined from 6061-T6 Aircraft Grade Aluminum with Weight Reducing Lightening Cuts, and Finished in a Matte Black Anodize.
0.87" Height Mount Positions RMR at the Correct Height for an Absolute Co-witness in line with Standard Height AR Iron Sights.
Low Profile 0.40" Height Mount Positions RMR at a Low Enough Height for Most Shotguns and Rifles with Traditional Stocks Not in Line with the Bore.
Utilizes Locking Torx Screws and Square-shaped Integral Recoil Stops for a Secure Zero Hold on Any Picatinny Rail.
Includes RMR Mounting Screws and Installation Tools for a Simple and Friendly Installation.

Pistol mount plate fits GLOCK 17 19 22 23 26 27 34..
Fits Vortex Viper/Venom micro red dot sight.
Fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a, fits Sightmark mini shot reflex sight.
Fits Burris Fastfire micro red dot sight(Notes: the screws included in the package are not long enough for some Burris red dot sights, you can use the....
WO WOLTIS,Caution: NOT fit RMR, RMS, Doctor..

FEATURES: Universal optics mount for most proliferated sites in the field. Super low-profile. Ability to use an optic without cutting your slide..
DESIGN: The mount itself is secured to the slide via the dovetail with 6 set screws..
NOTE: Fits for all Models Except 42/43. The pins for the RMR red dot only fit for the original RMR. But it can also install well on the replica RMR....