Best Rigid Foam Insulation

Window Foam Insulation Panels Season Protection Panel Seal Kit with U Shape Frame and Clear Double Sided Adhesive,17 x 9 x 7/8 Inch(Gray, White)

  • Nice Combination: you will receive a window side panel kit including 2 pieces of window foam insulation panel, 2 rolls of self adhesive side channels and 2 rolls of clear double sided adhesive, which is a good combination for you to use.
  • Practical Sealing Tool: this window side panel is applied to seal and fill the space around the window, isolate the outdoor heat wave in summer, bringing much convenience to your life.
  • Warm note: due to the large size of the product, in order to facilitate transportation, we have vacuum-packed the sponge, which can be restored to its original state after opening, and will not affect the use too much.
  • Quality and Reliable Material: insulation panel is made of high density foam, soft and reliable, will not cause break to the original home, the rigid plastic frame can fix the position of the sponge board, and the transparent double sided adhesive has high adhesive strength and is easy to remove without residue, these materials can serve you for a long time.
  • Easy Cutting and Installation: our window insulation kit is suitable for most window units, and the foam insulation board can be easily cut with ordinary scissors, and the double sided nano tape provides simple installation, you can use them together to repair your wind....
Check Stock

Akfix 805P Polyurethane Spray Foam - Waterproof Insulating Sealant, Expanding Foam Gap Filler, Low Expansion Foam for Window&Door Frame, Sound&Heat Insulation | Foam Gun NOT Included, 2 Pack, 29.9 Oz

  • For extra-large gaps and projects that require a fast turnaround, consider this expanding foam sealant. Over paintable and waterproof insulation versions are ideal for outdoor areas or water features. The product is classified by UL LLC (UL) with UL Certification..
  • Once cured, the rigid and robust foam forms a continuous, even insulating layer without joints or gaps, eliminating any thermal bridges. It is suitable for sound and heat insulation..
  • Simply Spray it and Fill it! Because of its superior product qualities, Akfix 805P Pu Foam is the obvious solution as a gap filler for all applications requiring quick and simple..
  • Our polyurethane sealant spray is a cost-effective and environmentally friendly construction material. It provides a high yield of up to 45 litres depending on temperature and humidity..
  • Polyurethane gun foam with a single component that is ready to use in a variety of building materials. It is excellent for fixing and insulating door and window frames, walls, gaps, joints and cavities..
Check Stock

FIBERGLASS WAREHOUSE Pour Foam 2 lb Closed Cell 2-Part Expanding Polyurethane Boat Floatation Coast Guard Approved (2 Gallon)

  • 2 lb Density Marine-Grade expanding foam: Closed cell foam, perfect for flotation, insulation, soundproofing, or filling voids. This pour foam is U.S. Cost Guard approved and is ideal for use in dock floats and boat parts..
  • Easy mixing and handling: 2-part liquid resin component system with a 1:1 Mix Ratio to produce the expanding polyurethane foam. Starts foaming after 45 seconds of mixing, and 7 minutes to full expansion. Build multiple layers by pouring the mix in separate batches to form strong bonds between layers..
  • 94% Rigid Closed-Cell Foam: Once the foam is cured, it helps prevent moisture absorption and won’t be affected by solvents, oil or gas. The cured foam can be cut to any desired shape or be coated with polyester, epoxy, or vinyl ester resins..
  • High-Quality polyurethane foam: This waterproof foam sealant will have a buoyancy of approximately 300 pounds per gallon foot, and a density of 2.0 lbs/ft3. This product does not contain any CFC blowing agents..
  • Package content: Our Fiberglass Warehouse 2-part Pour Foam includes 1 gallon of each component for a total of 2 gallons. It is a two liquid resin component system that produces foam when mixing part A and B together..
Check Stock

Schluter Systems Waterproof Extruded Polystyrene Foam Kerdi Board w/Thermal Insulation KB121220812 18x Building Panel 48 x 32 x ½ for Shower Wall & Tile Substrate Coverage 192 Sq Ft 17.8 Sq M

  • Kerdi polystyrene extruded waterproof wall panels for showers are light and, robust, dimensionally stable, making them easy to create a waterproof shower system. Dimensions: 48" x 32" x ½" (122 cm x 81 cm x 1.25 cm).
  • In addition to excellent waterproofing capabilities, Schluter building foam board KB 12 1220 812 has great foam insulation properties, thus can be used in various applications.
  • Shower wall panels contain no cement or fiberglass for a dust-free installation. The foam boards are covered with fleece webbing (Kerdi Membrane) on each side for effective bonding of tile to the surface.
  • Kerdi insulation board being impact-resistant and rigid, can be used to build custom vanities, shelving units (niche), countertops, and bathtub surrounds, benches and tile can be installed right away.
  • The Schluter Building Panel can be tiled with all types of porcelain, ceramic, or stone tile, whether they are mosaic or large format tiles, due to their stiffness, strength, and even surface.
Check Stock

GREAT STUFF Big Gap Filler | Insulating Foam Sealant, 12 oz. – Cream (8 Pack)

  • FILL BIGGER GAPS. This expanding foam insulation fills, seals and insulates gaps up to 3". This ready-to-use sealant is specially formulated to take on common areas of energy loss such as rim joists/sill plates, plumbing, HVAC and larger penetrations..
  • STRAW-APPLIED. Save time on your projects with this simple to use spray foam — the straw applicator makes any project a breeze and helps you deliver the right amount of insulating foam even in hard to reach spaces..
  • SPRAY ANYWHERe. Tackle a variety of projects with exceptional adhesion to building materials on both the interior and exterior of your home. Adheres to wood, metal, masonry, glass and most plastics..
  • QUICK-CURE. Stop waiting around and keep the pace of your projects on target. This foam sealant dries tack-free in 20 minutes and cures rigid for trimming in 1 hour. Trim, sand, stain and paint for a truly GREAT finish to your projects..
  • FILL MORE GAPS. Get the job done right the first time with this cost-effective bulk case of polyurethane foam crack filler from GREAT STUFF. Includes an 8-count of 12 oz. cans, ea....
Check Stock

GREAT STUFF Big Gap Filler | Insulating Foam Sealant, 20 oz. – Cream (12 Pack)

  • BIG GAP FILLER. This expanding foam insulation fills, seals and insulates gaps up to 3". This ready-to-use sealant is specially formulated to take on common areas of energy loss such as rim joists/sill plates, plumbing, HVAC and other larger penetrations..
  • STRAW-APPLIED. Save time on your projects with this simple to use spray foam — the straw applicator makes any project a breeze and helps you deliver the right amount of insulating foam even in hard to reach spaces..
  • SPRAY ANYWHERe. Tackle a variety of projects with exceptional adhesion to building materials on both the interior and exterior of your home. Adheres to wood, metal, masonry, glass and most plastics..
  • QUICK-CURE. Stop waiting around and keep the pace of your projects on target. This foam sealant dries tack-free in 20 minutes and cures rigid for trimming in 1 hour. Trim, sand, stain and paint for a truly GREAT finish to your projects..
  • FILL MORE GAPS. Get the job done right the first time with this cost-effective bulk case of polyurethane foam crack filler from GREAT STUFF. Includes a 12-count of 20 oz. cans, each with dispensing straws to cover all your gaps and cracks..
Check Stock

TotalBoat Flotation Foam - 2 Part Expanding Polyurethane Marine Pour Foam for Boat Floatation, Insulation and Soundproofing (2 LB Density, 2 Gallon Kit)

  • LIGHTWEIGHT, TWO PART POLYURETHANE FOAM: Ideal for adding buoyancy, thermal insulation, soundproofing, and filling gaps or voids.
  • tested in accordance with U.S. Coast Guard Regulation # 33 CFR 183.114.
  • EASY TO USE: Liquid urethane pour foam has a simple 1:1 mix ratio, expands rapidly & hardens in place in about 5 min. at 70-80°F.
  • to build multiple layers for filling under boat decks, pour expanding foam in separate batches.
  • 94% CLOSED CELL FOAM: Perfect for marine applications.
  • resists water absorption and damage from gas, oil or solvents.
  • once cured, foam can be coated with polyester, epoxy or vinyl ester resin.
  • can also be easily cut or carved to shape.
  • proper temperature, timing, mixing and venting are critical for proper foam expansion.
  • after mixing, the foam expands rapidly and becomes rigid, so clean the surface in advance and be ready to pour.
  • AVAILABLE IN A 2 QUART KIT AND A 2 GALLON KIT.
Check Stock

Lifeboat Urethane Pour Foam - 2lb Density - 1 Gallon Kit 2-Part Closed Cell Rigid Pour Foam - Fast-Acting Formula - Great for Boat Buoyancy, Flotation, Filling, Soundproofing, & Insulation

  • ✅ LIQUID FOAM INSULATION - The ideal foam for marine applications, our liquid urethane is great for soundproofing and insulating. Use it to fill dock floats or gaps and cavities in boat parts.
  • ✅ IMPRESSIVE STRENGTH - Urethane is both lightweight and extremely reliable. After curing into its rigid form, our insulating foam boasts a 95 to 98% closed cell structure with a 2lb density.
  • ✅ EASY TO USE - Great even for novice boat owners! This pourable liquid urethane foam is very easy to work with and expands rapidly. Mix Parts A & B at a 1:1 ratio for best results..
  • ✅ QUICK SETTING - Our expanding foam has a short curing time and minimal shrinkage, leaving your boat ready for use just hours after application. The foam hardens in place within 10 minutes.
  • ✅ LONG LASTING RESULTS - Once cured, urethane is unaffected by gasoline, oil, fresh or saltwater, or solvents, making it one of the most dependable and enduring materials for boating needs.
Check Stock

Lifeboat Urethane Pour Foam - 2lb Density - 2 Gallon Kit 2-Part Closed Cell Rigid Pour Foam - Fast-Acting Formula - Great for Boat Buoyancy, Flotation, Filling, Soundproofing, & Insulation

  • ✅ LIQUID FOAM INSULATION - The ideal foam for marine applications, our liquid urethane is great for soundproofing and insulating. Use it to fill dock floats or gaps and cavities in boat parts.
  • ✅ IMPRESSIVE STRENGTH - Urethane is both lightweight and extremely reliable. After curing into its rigid form, our insulating foam boasts a 95 to 98% closed cell structure with a 2lb density.
  • ✅ EASY TO USE - Great even for novice boat owners! This pourable liquid urethane foam is very easy to work with and expands rapidly. Mix Parts A & B at a 1:1 ratio for best results..
  • ✅ QUICK SETTING - Our expanding foam has a short curing time and minimal shrinkage, leaving your boat ready for use just hours after application. The foam hardens in place within 10 minutes.
  • ✅ LONG LASTING RESULTS - Once cured, urethane is unaffected by gasoline, oil, fresh or saltwater, or solvents, making it one of the most dependable and enduring materials for boating needs.
Check Stock