Best Rf Components

Audiolab DC Block Audio Grade Mains Filter & Direct Current Blocker Black

The typical mains supply is subject to various kinds of interference and non-linear loads, which distorts the AC waveform. Asymmetrical loads will....
This typically manifests in 'noisy operation' and acoustically compromised performance. Removing the DC from your mains supply will not only restore....
As well as DC removal, the audiolab DC BLOCK provides additional mains conditioning and RF filtering, of both common and differential mode noise,....
KEY FEATURES: Removes DC from AC mains supply. Reduces transformer hum. Reduces RF interference. Improves the performance of audio components..
Power Requirement: 100-240V ~ 50-60Hz. Peak Load: 600VA. Audio Power Amplifier compatibility: .

Check Stock

MPD Digital 50 feet of LMR-400 Ultra Low Loss Coax Cable with N Male Connector Ends, Black

LMR400 CABLE TYPE: A Registered Trademark of Times Microwave Systems.
LMR-400 Coaxial cable is a direct drop-in replacement for RG-8/9913. This Cable Connects Antennas, Receivers, Meters, Radio transmitters and other applicable RF Sources..
CONNECTOR TYPES: N type male to N type male.
ULTRA LOW LOSS & FLEXIBILITY: This low loss transmission line can be used in almost any rf application where handling characteristics and when improved shielding and Low Loss is required.
Ensures maximum performance for your antenna installation..
OUTER JACKET MATERIAL: Flexible Indoor/Outdoor UV Proof FR-PE, Outer Diameter: .400 (10.3mm) nom., SRL: per MIL-C-17/74. Like all LMR cables the PE Jacket and Dual Shield eliminates the need for conduit and avoiding electrical sources..
WARRANTY: This is A Genuine U.S.A made Times Microwave (TM) Product, Providing The Best Signal in RF Coaxial Cables since 1948. Assembled by MPD Digital, a DoD Supplier - in a GA Facility using MILSPEC Components. Limited 1 year Warranty.

Check Stock

RF Explorer 6G Combo with AluminiumCarrying Case RF Explorer Pro Software for RF and Wi-Fi Analyzing on Windows and Mac

Frequency band: 15MHz-2.7GHz and 4.85GHz-6.1GHz.
Newest Firmware upgrade includes Wifi Analyzer.
Free Mac and Windows software for analysing RF and WiFi networks using Waterfall 3D and 2D.
Aluminium carrying case allows to to protect your RF Explorer device and keep all the parts and components organized.

Check Stock

E-outstanding 25dB HDTV TV Antenna Light Amplifie 1PC High Gain Low Noise Amplifier Kit TV HDTV Antenna Signal Booster Gain with USB Power Cable

...ble TV box, antenna, DTV, CCTV DVR, MATV or all other RF modulated TV system. Designed for large multi-dwelling units(MDU) that require precise RF amplification with gain and slope adjustments for a professional installation..
High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels..
Anti-Interference module design with advanced noise filer built in. -20 dB Output/Input Test Port i....

Check Stock

High Frequency Transducer, Bandwidth Mixing Board Mixer Module -10dBm for Quadrature Modulation for Base Station for HF VHF Receiver

【Important Data】: SSB noise figure (NF) of 9.75 dB--Input IP3: 28.5 dBm--Input P1dB: 13.3 dBm--Typical LO drive: 0 dBm--Power conversion gain of 1.8 dB.
【Wild Used】: This 5V double balance up and down frequency mixer module is widely used for cellular base station receivers, Radio link down converters, Broadband block conversion, Instrumentation.
【Low Power】: Our 130mA 50 Ohms Balun coil coupling frequency conversion mixer features adjustable bias for low power operation, so you can trust and use this RF mixer inverter with confidence.
【Wonderful Components】: This 5V ADL5801 double balance up and down frequency mixer module is equipped with exposed paddle, 4mm x 4mm, 24-lead LFCSP package, so it will be an ideal choice for you.
【Size】: Power supply: DC+5V@80mA(anti-reverse connection protection.)--RF_IN/RF_LO input frequency range: 10-6000Mhz--Input and output impedance: 50 ohm--Type:Input Balun coupling, Input/output Balun coupling(Optional)--Weight: Approx.15g/0.5oz.

Check Stock

MPD Digital LMR400-N-male-to-N-male-20 Feet LMR-400 Coax Cable N-Male Connector to N-Male Ultra Low Loss LMR400

LMR400 CABLE TYPE: A Registered Trademark of Times Microwave Systems.
LMR-400 Coaxial cable is a direct drop-in replacement for RG-8/9913. This Cable Connects Antennas, Receivers, Meters, Radio transmitters and other applicable RF Sources..
CONNECTOR TYPES: N type male to N type male.
ULTRA LOW LOSS & FLEXIBILITY: This low loss transmission line can be used in almost any rf application where handling characteristics and when improved shielding and Low Loss is required.
Ensures maximum performance for your antenna installation..
OUTER JACKET MATERIAL: Flexible Indoor/Outdoor UV Proof FR-PE, Outer Diameter: .400 (10.3mm) nom., SRL: per MIL-C-17/74. Like all LMR cables the PE Jacket and Dual Shield eliminates the need for conduit and avoiding electrical sources..
WARRANTY: This is A Genuine U.S.A made Times Microwave (TM) Product, Providing The Best Signal in RF Coaxial Cables since 1948. Assembled by MPD Digital, a DoD Supplier - in a GA Facility using MILSPEC Components. Limited 1 year Warranty.

Check Stock

LANTRO JS RF WideBand Amplifier 433MHz 22dB High Gain Low Noise LNA Amplifier

【Product Parameters】- Working Voltage: 3---5V.
Protect-----This strong heavy duty tool bag can protect your tools from water and dust.
【Scope of Application】- The product can be applied to various RF receiving front ends, used for shortwave, FM broadcasting, remote control receivers, cable TV signal amplifiers and other RF signal amplifications that require low noise.
【Excellent Performance】-The radio frequency amplifier is made of high-quality electronic components and has the advantages of high gain, low noise figure, etc.
【Low Noise】- The noise factor is as low and 0.55dB, which is quite small.

Check Stock

MPD Digital LMR400-N-male-to-N-male-250ft LMR-400 Coax Cable N-Male Connector to N-Male Ultra Low Loss Transmission Line LMR400

LMR400 CABLE TYPE: A Registered Trademark of Times Microwave Systems.
LMR-400 Coaxial cable is a direct drop-in replacement for RG-8/9913. This Cable Connects Antennas, Receivers, Meters, Radio transmitters and other applicable RF Sources..
CONNECTOR TYPES: N type male to N type male.
ULTRA LOW LOSS & FLEXIBILITY: This low loss transmission line can be used in almost any rf application where handling characteristics and when improved shielding and Low Loss is required.
Ensures maximum performance for your antenna installation..
OUTER JACKET MATERIAL: Flexible Indoor/Outdoor UV Proof FR-PE, Outer Diameter: .400 (10.3mm) nom., SRL: per MIL-C-17/74. Like all LMR cables the PE Jacket and Dual Shield eliminates the need for conduit and avoiding electrical sources..
WARRANTY: This is A Genuine U.S.A made Times Microwave (TM) Product, Providing The Best Signal in RF Coaxial Cables since 1948. Assembled by MPD Digital, a DoD Supplier - in a GA Facility using MILSPEC Components. Limited 1 year Warranty.

Check Stock

onelinkmore BNC Female to Dual Banana Male Plug Jack Binding Posts RF Coaxial Adapter BNC to BNC Male Banana Coax Jack Splitter Connector Pack of 2…

Type: BNC to BNC Banana Male Plug Coaxial Adapter Binding Post RF Coax Coaxial Splitter Connector.
Binding posts facilitate connections of test leads or additional components,Used for adapting single BNC Plug to Dual Banana Jack and Provides....
Function: One side is BNC Female with inner bore, and the other side is two banana Male plug binding posts, used for connecting BNC to Banana RF....
Widely used for Antennas, Coaxial cable, LMR, Wireless LAN Devices,Connections can be made to the binding posts by spade lugs, banana plugs or wire....
2 Pieces BNC to Banana Binding Post Plug Connector included.

Check Stock