Best Retract Cross Bits

Alma Gourmet Stainless Steel Truffle Slicer / Shaver | Made in Italy

  • Special Smooth Blade, Best for Truffles - Please Use with Caution!.
  • These adjustable truffle slicers can cut as thin as 0.2 mm slices so that the full flavor of the white or black truffles can be exposed.
  • The blade is very sharp so it is to be handled with caution, especially when slicing small bits of truffle!.
  • After each use, wash thoroughly and retract the blade into the frame for safety and longevity of the slicer.
Check Stock

JIS B4633 1/4 Hex Screw Driver Bits | Made in Japan +1 +2 +3 X 25.4mm - 6 Pcs

  • 1/4" Hex Screw Driver Bits | 6 Pieces +1 +1 +2 +2 +3 +3 X 25.4mm | Non magnetic.
  • Made in Japan according to JIS B4633 (Japanese Industrial Standard). Hardness rating - H.
  • These Cross Point screwdriver bits fit JIS screws and Phillips screws.
  • 1/4" Hex bits are suitable for use in drills and screwdrivers with replaceable 1/4" bits.
  • JIS screws are used in most Japanese brands - Cars, motorbike, cameras, fishing reels, push bike gears, printers and photocopiers, and lots of other....
Check Stock

REXBETI 24 Piece Torx Head Screwdriver Bit Set, Magnetic 1/4 Inch Hex Shank S2 Steel Tamper Resistant Star Bits Set, 1\ and 2.3\ Long Drill Bit

  • ...is made of S2 high-grade alloy steel, and the magnetized screwdriver bits with overall induction hardening and impact resistance, toughness. These electric screwdriver drill bits fit for electric screwdriver, cordless screwdriver, Impact drill or any other power drill with 1/4 inch hex shank..
  • Wide Application - The cross headed screwdriver bits is suitable for general sizes and all kinds of damaged bits. The magnetic Screwdriver bits are compatible with electric screwdrivers, manual screwdrivers, T-handle 1/4" driver screwdrivers, impact drivers and more. The anti-slip hex bit set remove broken screws or drill holes in one step..
  • Packaging Included - The electric anti slip screwdriver tool include 6 PH2 screwdriver drill bit heads in size 50mm, 65mm, 70mm, 90mm, 127mm, 150mm. and 1PCS Magnetizer, this Screwdriver Bits will meet your different needs..
Check Stock

10 Pack 1/4\ Concrete Drill Bits, Masonry Drill Bit Set, 6mm Tungsten Carbide Drill Bit Set for Tile/Ceramic/Glass/Mirror/Brick/Plastic/Cement, 1/4\ Quick Change Hex Shank, in Carrying Case

  • High-Quality 1/4” Concrete Drill Bits: Made of Premium carbide YG6 alloy with anti-rust treatment.
  • head reinforced reducing bit cracking effectively, ensuring a longer drilling life.
  • Accurate Masonry Drill Bits: The tip of the bit is precision unique cross spear design.
  • accurately ground edges reduce bit walking.
  • superior tile cutter can run through ceramic tile in a neat and fast manner.
  • 1/4” Hex Shank Tile Drill Bits: fits into all power tools more easily and securely.
  • popular electric hand drill, bench drill with quick change chuck.
  • Durable & Sharp: Masonry Drill Bit Set for Glass, Ceramic, Tile, Mirror, Plant Pots, Wood, Porcelain, Brick Wall etc. Please keep bits cool use running water if possible as coolant.
  • Worry Free: 10 pieces of fine grade high durable 1/4” (6mm) drill bits to meet needs for multi holes in variety projects.
  • with extra bits at hand, don’t worry about running out of bits in the middle of a project.
Check Stock

YDLQWCZ Long Phillips Cross Screwdriver Bit Sets PH1(Φ3.0) PH1(Φ4.0) PH1(Φ4.5) PH2(Φ4.5) PH2(Φ5.0) PH2(Φ6.0) 6 Pieces 6 Inch Length S2 Steel Cross Phillips Screwdriver Bit Set(6Pcs Cross Head)

  • ★【Long Phillips Cross Bits】PH1(Φ3.0) PH1(Φ4.0) PH1(Φ4.5) PH2(Φ4.5) PH2(Φ5.0) PH2(Φ6.0), 6 in 1 different size Cross Phillips driver bits set meet your different needs. (PH1 -- for major and small appliances.
  • PH2 -- for household screws and major appliances).
  • ★ 【Widely Application】1/4” inch hex shank, and 6 inch (150mm) length. Can be used with electric screwdriver, manual screwdriver, electric drill, group general tools, air and other any standard bit holders..
  • ★【S2 High Quality Steel】Made of S2 high quality shock-resisting tool steel, a hard and abrasion-resistant alloy metal. Phillips driver head surface for steel material color,from inside to outside are the same..
  • ★【Magnetizable Head】Magnetizable cross phillips head (New Bits with Weak Magnetic). After Magnetized with a magnet it would with a strong magnetic, can suck the screws easily when used it..
  • ★【Exquisite Workmanship】This Phillips screwdriver bit heads, exquisite workmanship, each edge can be accurately locked screws, no damage to the screw, and the screwdriver head.Such a practical aid in many situations..
Check Stock

Forstner Bit Set, 5-Piece Forstner Bits Wood Drilling Smooth Flat-Bottomed Pocket Holes in Hard Soft Wood, 3/8" Shank Fit Drills and Drill Presses, Size 1”, 1-7/64”, 1-1/4”, 1-3/8”, 1-1/2"

  • ... built with 3/8" shank compatible with both drill presses and handheld drills.
  • Using Forstner bit with a drill press: get a clean and plumb hole with minimal effort.
  • 1, Position and Mark the Workpiece and test if it’s even.
  • 2, drill at recommended RPMs 1200~1500 and retract the bit often to cool it.
  • 3, Lower the drill press speed when finish the hole.
  • Cut with handheld drills requires patience and power: 1: Clamp Material, Mark Centre Point & Align Drill.
  • 2: Start Drilling at a slow speed, holding the drill firmly to avoid bit walking. an auxiliary handle will help. 3: Increase the drill’s speed, retracting the drill to remove chips.
Check Stock

Nail Drill Bit Set, Corfulra 3pcs Safety Bits for Nail Drill, Tungsten Carbide Nail Drill Bits, Smooth Round Top Large Barrel Bits, Nail Supplies for Nail Tech to Remove Acrylic Nails (XF & M & XC)

  • Nail Drill Bits set: 3 piece drill bits for nails in total. You can choose round top lagrge barrel bits from XF, M, XC according to the thickness of the nail gel to be polished..
  • Safety Nail Drill Bits: The large barrel nail drill bits are rounded at the top to protect the cuticles and sidewalls from scratches and cuts. Low heat and low vibration with cross teeth design. Good choice for nail beginners and nail tech..
  • Professional Drill Bits for Nails: The tungsten carbide nail bit is made of the harest material next to diaminds,which is high strength and durability, little vibration. Long-lasting and save your money..
  • Two Rotate Direction：Suitable for both left and right hands use. You can choose the direction in a different situation..
  • Function:3/32-inch cuticle bit for nail drill fit most electric or rechargeable manicure nail file machine. Fast to shape, carve, smooth, back filling, and remove acrylic nails, dip powder, polygel, and hard gel nails..
Check Stock

MelodySusie Long Flame Nail Drill Bits, 3/32'' Carbide Tungsten Bits, Suitable for Manicure Pedicure Cuticle Gel Polishing, Beginners Bits, Rose Gold, Series Bit-X, Triple Coarse

  • Long Flame Cross Cut Nail Drill Bits | Color: Rose Gold | Grit: Triple Coarse | Shank Size: 3/32'' | Two-Way Rotation..
  • Unique Long Flame Nail Drill Bit: The bits are designed with a longer head, and a large contact area which is faster and more convenient for removing & polishing acrylic nails than other bits. Extreme sharp teeth design allows you to fast remove acrylic nails, hard nails, gel extensions, thick nails, and dip powder with little pressure, making your nails remove like a breeze..
  • Two Rotate Direction: Designed to cut smoothly in clockwise and counter-clockwise directions for both two hands. Works for both left and right hand, you can choose the direction in a different situation. It needs that a nail drill that has a forward and reverses function..
  • Professional Nail Drill Bits: Made of the hardest YG6X carbide tungsten material, this high-precision machining nail bit comes with excellent heat dissipation, low vibration, low noise, and hard-wearing features. Fast to remove acrylic nails, dip powder, polygel, and hard gel nails..
Check Stock

IDEAL Electrical 35-936 Torque Screwdriver Kit [7 Pieces] – 0 to 36 Lb. Adjustable Torque Screw Driver w/ Phillips, Flat, Square Bits. Driver Bit Set

  • Electrical Screwdriver: an assortment of screwdriver and driver bits, this 7-pcs. screwdriver set is commonly used by electricians and maintenance engineers to tighten cross- and slotted-head screws.
  • Durable Construction: carefully engineered with hard-wearing materials, the torque driver is immune to abrasion and wear over a prolonged usage and stays resistant to corrosion as well.
  • Adjustable Torque: the bit driver has user-settable torque from 0 to 36 lb. It can be changed using the unique torque limiting clutch which disengages once the preset torque is achieved, preventing overtightening and possible damage.
  • Protective Cap: the nut driver bit set is equipped with a protective vinyl cap which not only keeps the handle protected. but also shades the torque key slot that is used to get accurate control torque adjustments.
  • Product Specification: the 7-in-1 driver bit set comes with #1 and #2 Phillips bits, #1 and #2 Square bits, and 1/4 in. and 3/16 in. Slotted/Flat bits.
Check Stock