Best Resin Embedment

New Sport Sand Shallow Water Beach Anchor by SandShark Boats Pontoons PWC Kayak Patent Pending Design Snaps Together Easy Storage Easy to Use 4 Tall.

Patented Passive Embedment Ground System for up to 5 times the gripping power.
Cap watering hole for easy stake removal from extremely hard soil.
Rust and bend resistance galvanized metal stake.
Carabiner to easily attach and locate accessories like keys and bottle openers.

Check Stock

uxcell 10Pcs 9mm-15mm Grip Range Toggle Hollow-Wall Anchor Screw Eye Assortment

Wedge anchor provides a secure hold in solid masonry and uncracked concrete.
Anchor consists of a 304 stainless steel body, washer, nut, and clip to provide more corrosion resistance than galvanized or zinc-plated steel anchors.
Meets Fed. Specs. QQZ-325Z Type II Class 3 and GSA FFS-325 Group II Type 4 Class 1, and complies with Miami-Dade NOA #08-0911.02 code.
Ultimate tensile strength is 2,000 lb. at 1-1/4" embedment depth in 4,000-psi concrete with a static load.
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).

Check Stock

Explosion Proof Manual Transfer Switch - 30 Amps - C1D1/C2D1-3P Double Throw - ATEX/IECEX

INCLUDES: (1) ROHN SB55G 5' SHORT BASE FOR EMBEDMENT IN CONCRETE, (5) 55G STANDARD 10' SECTION, (1) APL55G TOP TOWER PLATE (1) ACWS ANTI-CLIMB WARNING SIGN KIT, AND ROHN 55G SELF-SUPPORTING TOWER SPECIFICATIONS. *This kit is shipped via freight only, see below for more information* *Be sure your contact number is current on your order*.
55G Weight: 100 lbs each. SB55G Weight: 46 lbs. APL55G Weight: 21 lbs.
1-1/2" OD, 11 Gauge legs 7/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on a 17" equilateral triangle design.
The ROHN 55G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 55G Guides for Specifications and Installation Requirements*. Each section contains all required nuts and bolts shipped with each section..

Check Stock

Self Tapping Inserts Self Tapping Threaded Inserts 50pcs Brass Slotted Thread Inserts Self Tapping Thread Slotted Inserts Pressed Fit into Holes

【Self Tapping Capability】: This self tapping thread insert has self tapping capability, so you don’t need to tap in advance, you can directly screw it into the reserved hole.
【Strong Tensile Strength】: This threaded insert embedment nuts has strong tensile strength and large contact area with the finished product.
【Can Prevent Loosening】: This brass slotted thread inserts are easy to install, it have strong shock resistance, which can effectively prevent loosening.
【Improve the Thread Strength of the New Product】: This self tapping thread slotted inserts can effectively improve the thread strength of the new product.
【7 Types, A Total of 50】: This brass threaded inserts has 7 commonly used types, a total of 50, which can be used for a long time.

Check Stock

ROHN 25SS040 40′ Self-Supporting Tower, No Ice

INCLUDES: (3) ROHN 25G STANDARD 10′ SECTIONS, (1) ROHN 25AG2 STANDARD 9′ 9″ TOP SECTION, (1) ROHN SB25G5 5′ SHORT BASE FOR EMBEDMENT IN CONCRETE, (1) ACWS ANTI-CLIMB WARNING SIGN KIT, AND ROHN 25G SELF-SUPPORTING TOWER SPECIFICATIONS.
The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
1-1/4″ OD, 16 Gauge legs 5/16″ OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4″ equilateral triangle design.
Each section contains all required nuts and bolts shipped with each section. Note that the short concrete base can only be connected one ONE end. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24″ OD x 2.08″ ID Overall length is 9’9″ – see images for measurement breakdown. See description below for more information..
This tower kit ships via freight only. See below for more information. *Be sure your contact number is current on your order*.

Check Stock

Single 12-48V DC LED FAA L-810 Obstruction Light, Red, Stead-Burning

INCLUDES: (1) ROHN 45AG2 STANDARD 9' 6" TOP SECTION, (1) ROHN SB45G 5' SHORT BASE FOR EMBEDMENT IN CONCRETE, (3) 45G STANDARD 10' SECTION, (1) ACWS ANTI-CLIMB WARNING SIGN KIT, AND ROHN 45G SELF-SUPPORTING TOWER SPECIFICATIONS. *This kit is shipped via freight only, see below for more information* *Be sure your contact number is current on your order*.
The ROHN 45G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 45G Guides for Specifications and Installation Requirements*.
1-1/4" OD, 14 Gauge legs 7/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on a 16 3/4" equilateral triangle design.
Each section contains all required nuts and bolts shipped with each section. 45AG2 Features a tapered top and integrated mounting pipe. The mounting pipe is 2.38" OD / 2.07" Mounting PipeOverall length is 9'6" - see images for measurement breakdown. See description below for more information..
45G Weight: 70 lbs. 45AG2 Weight: 66 lbs. SB45G Weight: 32 lbs.

Check Stock

HELIFOUNER 420 PCS M2 M3 M4 M5 Female Thread Knurled Nuts Brass Threaded Insert Embedment Nuts Assortment Kit

【Sizes】M2 M3 M4 M5 Female Thread Knurled Nuts Kit, total 15 different sizes can meet your different meets..
【Material】Made of high quality environmentally friendly brass material, high strength and hardness, strong tolerance, the force is evenly tightened, you can use it for a long time..
【Package Included】The whole set contains 420 pieces 15 sizes knurled threaded insert nuts, package in durable transparent box with label. It is easy to distinguish the size of the product, you can choose the suitable one to meet all your needs..
【Easy To Use】These Brass Threaded Insert Embedment Nuts can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection, the material of the nut is brass and it can resist heat..
【Wide Applications】Widely used in mobile phones, laptops, various plastic casings, communications, micro-motors, computers, electrical appliances, electronics, toys, watches, lighting, locomotives, etc, and it can be mounted into the taper hole by ultrasonic or heat, or molded during injection..

Check Stock

TEACH Flat Head Phillips Drive Concrete Screw to Anchor Masonry, Block & Brick,270-Piece

...e-driven into the same hole. Special carbide bits are recommended for driving concrete screws into masonry..
Some applications include anchoring the following to masonry: electrical junction boxes, wooden beams, plywood, exterior insulation, metal flashing, thresholds. Hole should be of a depth equal to the required embedment plus 1/2”.
Concrete screws should be installed a minimum of ten anchor diameters between each other. They have an advantage over most other types of masonry anchors in that they can be installed close to the edge of the material in which they are installed..

Check Stock

Rohn 25G 50' Tower with Hinged Base (Fold Over Base)

INCLUDES: (4) ROHN 25G STANDARD 10' SECTIONS (1) ROHN 25AG2 9' TOP SECTION (1) ROHN SBH25G 3' 4" HINGED SHORT BASE FOR EMBEDMENT IN CONCRETE. *All Installations using a hinged base MUST be guyed and/or bracketed. See our store for these items* *These bases are NOT rated for use in self-supporting applications*.
The ROHN 25G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 25G Guides for Specifications and Installation Requirements. Professional Installation Required*.
1-1/4" OD, 16 Gauge legs 5/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on an 11 1/4" equilateral triangle design. *There are no wind/ice/load guidelines for this set up - you must consult a professional installer. We make no claims that this set up will handle any certain wind/ice/load specifications. This kit is offered as a convenience to our customers*.
Each section contains all required nuts and bolts shipped with each section. 25AG2 Features a tapered top and integrated mounting pipe. The mounting pipe, measured from the apex of the side rails, is 14 Gauge x 2.24" OD x 2.08" ID Overall length is 9'9" - see images for measurement breakdown. See description below for more info....

Check Stock