Best Relay G1wireless For Guitar

Two Position Low V Actuator w/End Switch

  • Output: fan relay, alarm relay and 4-20ma current loop.
  • Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
  • Mounts on a standard 4” x 4” electrical box.
  • 5 a spdt fan relay controls starters of exhaust fans.
Check Stock

SainSmart USB 4 Channel Relay Automation (5V)

  • NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay..
  • Onboard high performance microcontroller chip, CH340 USB control chip.With power LED indicator and relay status LED.On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously..
  • Module with overcurrent protection and relay diode freewheel protection..
  • NOYITO 8-Channel Micro USB Relay Module ASIN：B09RGTSHHW.
  • NOYITO 4-Channel Micro USB Relay Module ASIN：B09RGVQXXT.
Check Stock

Engine Wire Loom Wiring Harness for GY6 125cc 150cc 250cc Scooter Quad Bike ATV Buggy Go Kart Dune

  • Starter Solenoid Relay + Starter Motor for GY6 4-Stroke ATV Dirt Bikes Pit Bike Scooters Go Kart Moped Quad 4 Wheelers Buggys 50cc 150cc 200cc 250cc Engine. Compatible with Tao tao SUNL Coolster Baja Roketa Icebear Jonway GY6 engine parts replacement..
  • Starter Solenoid Relay for 4-Stroke GY6 Engine 50cc 150cc 200cc 250cc ATV Dirt Bikes Scooters Go Kart Dne Buggys Quad 4 Wheelers Pit Bike Moped Roketa SSR Taotao Sunl Coolster..
  • Motor Starter for GY6 125cc 150cc Scooter ATV Moped Go Karts Quad 4 Wheelers Taotao SUNL Baja Icebear Roketa Jonway.
  • GY6 Motor Starter For 152QMI 157QMJ engine motor. 12V / 9 Teeth / CW Rotation..
  • Starter Solenoid Relay,Starter Relay Solenoid also works with Honda Clones 50cc, 70cc, 110cc, 125cc, 250cc etc. GY6 Starter Solenoid Relay Replace oem part number: 35850-286-007,35850-286-027,35850-286-017,35850-375-000. High cranking power,reduce startup switch electric current.
  • High quality material,efficient and durable..
  • 4 Stroke Engine Parts GY6 150cc starter motor may also know as 150cc motor,150cc scooter motor,4 wheeler motor,starter motor motorcycle,gy6 starter motor,150cc gy6 starter motor,50cc starter motor,150cc starter motor,125cc starter motor,moped starter motor,scooter starter motor,go kart starter motor,ATV starter motor. ....
Check Stock

Aoicrie 5Pcs DC 5V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 5V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine /etc..
Check Stock

Aoicrie 5Pcs DC 12V 1 Channel Relay Module Board Shield with Optocoupler Isolation Support High or Low Level Compatible Development Board Trigger

  • This Relay Board Maximum load: AC 250V/10A, DC 30V/10A With power and relay action indicator.each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • Main Specification Peak Load of NO Connector: AC 250V/10A, DC 30V/10A.
  • These Relay Board use photocoupler isolation that has strong driving ability and stable performance.The isolation circuit prevent damages to I / O port by relay switch current.The module has a jumper so you can set rather the unit state changes with high or low signal. Has screw terminals for relay (NC,C,NO) and for input.
  • Using SMD optocoupler isolation, strong driving capability, stable performance.Fault tolerant design, even if the control line is broken, the relay will not operate.
  • And interface design humanized, all the interface can be directly connected through the terminal lead, so convenient..
  • Wide Application These 12V relay board works well with for ARM /PIC /AVR /MCU/Raspberry/CNC machine etc..
Check Stock

Edwards Signaling 7005-G5 Door Annunciator

  • ☆☆With six independent relay switches, and by dialing its mobile phone number to activate the NO.1 relay switch, it will reject the call and turn on the connected device without answering, so it will not generate when dialing this machine Call charges, it will identify the authorized phone number that is calling, and refuse to answer the call without answering. It has 5 other independent relay switches, which can be turned on or off by sending SMS text to GSM‑RELAY6..
  • ☆☆6‑channel 250V 10A 50Hz relay contact, the relay can operate almost all equipment, optional relay working mode. Has 6 alarm inputs. When the input is shorted to GND, an alarm will be triggered and an alarm message will be sent..
  • ☆☆One relay output with call mode and the other relay output with SMS control can be easily programmed with mobile phone or PC software. SMS can be used for digital programming quickly and conveniently through SMS or on‑board quick teach button..
  • ☆☆Support free control mode or security authorization number control mode, support custom commands, easy to understand. Optional password to keep the system in safe operation mode, support remote password operation and password change..
  • ☆☆Applications include remote control of heating of holiday ....
Check Stock

AEDIKO 4pcs Relay Module DC 5V Relay Switch 1 Channel Relay Board with Optocoupler Isolation Support High or Low Level Trigger

  • Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate.
  • All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed.
  • Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current.
  • Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input.
  • Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc..
Check Stock

uxcell 2 Pcs 4.7 Ohm 2 Pin Refrigerator Start Relay for Compressor Black

  • Total Size: 3.2 x 2.2 x 2.85cm / 1.26" x 0.87" x 1.12".
  • Pretty generic start relay used on various brands of mini fridges and coolers.
  • How to Select Relay : Shop relay, consistent of size,resistance and pin quantity as replacement.
  • Relay Breakdown Judgment : For start relay,shake it,with noise of debris collision,is broke..
Check Stock

Hilitand AD22B04 12V Signal Decoder 4 Channel DTMF Tone Relay Phone Remote Control PLC

  • 【12V】Working voltage is DC 12V, you can easily find suitable power for this relay..
  • 【reverse polarity protection.】This signal decoder relay ahs reverse polarity protection which can extend the service life..
  • 【8 modes】8 modes of operation: Non-locking (Momentary ), self-locking (Toggle), inter-locking(Latch), 5/20/60/120/250-second delay..
  • 【default control】The default control command is 1/2/3/4. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4.
  • control commands can be changed any 1-4 bits. (For more details, refer to "AD22B04_4 channel DTMF controller commands setting manual ")..
  • 【operating current】Standby 11-13 MA, 1 relay "open" 44MA, 2 relays "Open" 77MA, 3 relays "Open" 110MA, 4 relays"open" 140MA..
Check Stock