Best Refrigeration Service Wrench

YIYEIE Flare Nut Wrench Set, Metric 5-Piece, Brake Line Wrench Set 9, 10, 11, 12, 13, 14, 15, 17, 19, 21 mm, CR-V Steel, with Roll-up Pouch

  • Must-have for Mechanics: Flare nut wrenches, also named line wrenches, are widely used working on brake/fuel lines, steering, and refrigeration lines. Great to carry in your toolbox..
  • High Quality: Crafted from high-strength Chrome Vanadium Steel, heat-treated, drop forged, fully polished. Exceeds ANSI standard..
  • Durable for Last: Mirror chrome finish is shiny, easy-to-clean, corrosion and rust-resistant. Extends wrench service life effectively..
  • Tight Grip, Great Fit: Hex-shaped open-end heads have a good grip on five sides of fasteners, giving more points of contact on nuts, providing less slippage and rounding than traditional wrenches..
  • 15° Offset: The wrenches are slightly angled with a 15 degree, to provide knuckle clearance, make it possible to reach tighter places. Meets different applications, and makes your work easier..
  • Metric Size, 5-Piece: All wrenches are marked well with the size on both sides, maximizing efficiency with less carry. Wrench set includes the most popular sizes used for repair: 9mm x 11mm, 10mm x 12mm, 13mm x 14mm, 15mm x 17mm, 19mm x 21mm.
  • Carrying Pouch: The rolling pouch allows for easy organization, storage, and carrying out. Size markings on the pouch allow for easy identification, taking out, and storage..
Check Stock

Brazing and Soldering Kit

  • Professional torch kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes Target Tips that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • Also includes: HA3-12-Feet (A) hose, GG-4 quick disconnect handle, MA-2 cylinder wrench and EA-1G brass regulator for B acetylene cylinders.
Check Stock

uxcell Refrigeration Tubing, 1/8\ OD x 5/64\ ID x 16 Ft Soft Coil Copper Tubing

  • 【1/8" OD X 5/64" ID X 16 FT】Refrigeration tube outer dia is 3mm, inner dia is 2mm, total length is 16Ft/5m long.
  • 【HIGH REFRIGERATION EFFICIENCY】Good heat dissipation and refrigeration capability,high strength at low temperature.Copper tubes are hollow,so has strong heat transfer capability.If you need refrigeration for refrigerators, freezers, air conditioners, this is a good choice.
  • 【 COPPER MATERIAL】Copper refrigerator tube has the features of high temperature resistance, corrosion resistance, oxidation resistance, durability, long service life.
  • 【SOFT & SHAPE CHANGEABLE】Because refrigeration copper pipe can bend and deform, they can often be made into elbows and joints. Smooth bending allows copper tubes to bend at any angle.
  • 【WIDELY APPLICATION】Refrigerator Tubing is not only used for refrigerator, freezer and air conditioner as refrigeration tubing coil, but also used as a HVAC system pipe..
Check Stock

Beer Tap Faucet Handle Black - Set of 10

  • ...t a M3-M12 tap wrench. Fit 1/16" - 1/2" / 2.5mm - 12mm capacity size. Overall size(closed) is 19.3cm x 2.3cm x 1cm/7.6inch x 0.9inch x 0.4inch(LxWxH). Shank diameter is 8mm/0.3inch..
  • HIGH QUALITY TAP REAMER - The adjustable tap wrench is made of high-quality steel, with high hardness, strong wear resistance and long service life. The end of the tapping wrench tool is knurled for easy and firm grips. The hand wrench tool has one rigid handle and one adjustable jaws, which can easily and firmly clamp the tools..
  • MULTIPLE USE - The tap reamer wrench is designed for use with small tools that require manual rotation, such as taps, reamers, drill bits, and screw extractors. Manual operation is very simple and convenient, which can improve your work efficiency. It is also very suitable for DIY tapping..
  • EASY TO USE - When using a tapping wrench, apply even force with both hands. The wrench and the tap should form a 90-degree angle, and the tap and the threaded bottom hole are perpendicular to each other, rotate the adjustable metal tap handle reamer wrench in a certain direction..
  • QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% satisfaction is our top priority. If you have any questio....
Check Stock

WADEO Valve Core Remover Tool HVAC with Dual Size SAE 1/4 & 5/16 Port, 20 PCS Valve Cores with Teflon Seal, 5 PCS Brass Nuts and Valve Core Rod, Compatible with R410A R32 R22 R12 R407 R404 R600

  • Wide Application: Suitable for home refrigeration equipments, dual size sae 1/4'' & 5/16'' port makes the valve core remover tool be compatible with R410, R22, R12, R407, R404, R32 A/C air condition system, etc. (Not suitable for Automotive AC).
  • Easy to Install: Use this hvac valve core remover tool, the valve core rod makes it be easily inserted into the inner valve core to control the valve core. you don't need to stop the machine and release the refrigerant. Note: Before removing the valve core, close the valve of the valve core wrench and disconnect the air conditioner inner connection..
  • Upgraded Valve Cores: The bottom of our valve cores are golden yellow, strong resistance to fluorine and heat, has longer service life than ordinary valve cores.
  • Great Design: This hvac tools are mainly made of brass, it has a ball valve that can be opened and closed in just a quarter-turn. (No Gas Loss). Anti-slip design increase hand friction, prevent all kinds of overpowered valves.
  • High-quality craftsmanship probes, rugged and durable, suitable for most equipments. ality craftsmanship probes, rugged and ....
Check Stock

4882 Rear Wheel Axle Torque Wrench Hand Tools Similar to HD-47925

  • Allows for simple adjustment of drive belt tension or rear wheel alignment , It helps with getting the axle nut loose without taking the muffler off my Ultra, just to adjust the belt tension..
  • 36mm wrench includes a 1/2 inch square drive allowing for use with a torque wrench for proper axle torque.
  • This wrench has a 1/2" drive hole, Remember, if attaching to your torque wrench, this wrench MUST be turned 90 degrees from the direction of your torque wrench. Positioning it this way means it does not alter the length of your torque wrench and screw up your torque..
  • Material : The wrench is finished in a pretty durable black finish..
  • Made removing and re-torquing the axle nut easy without removing the right side muffler. Still had to remove left side muffler to remove the axle. Saved some time and made the job a lot easier..
  • [ 100% Satisfaction quality and service ] — If you're not 100% satisfied with our PRODUCTS, simply return it for a full refund in 30 days. Professional AND Sincere Service allows you to take no risks to purchase..
Check Stock

A ABIGAIL Adjustable 3 Jaw Oil Filter Wrench Tool Best for Removing Motorcycles Cars Trucks & Heavy Duty Oil Filters Fits Diameters 2 1/8-4 1/2 Inches Fits ⅜ and ½ inch Drive

  • 【High Quality】 The oil filter wrench is made of 45# carbon steel. This kind of material is much stronger than the normal materials. With the shinning painting on the surface, the filter wrench is totally rust and corrosion resistant..
  • 【Special Design】 The oil filter wrench is specially designed with three jaws. These three jaws will catch the filter more tightly..
  • 【Application】 The oil filter wrench can be adjust to remover the filters from 2-1/2 inch to 4.5 inch filters.Fits 1/2 and 3/8 inch square drive ratchet or 7/8 inch wrench in all kinds of vehicles..
  • 【Function】The oil filter wrench is a universal tool to remove the filters on your vehicles. Sometimes the filters are very tough. Then you need a oil filter to make your work easy..
  • 【Service】100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check Stock

Harris 45KPOP Brazing Kit, 1225-1370 F, w/1.75 oz Flux

  • Professional torch tool kit used in Plumbing, HVAC, Refrigeration and heating applications.
  • Kit includes Target Tips that solder and braze copper or steel pipe faster than conventional tips.
  • Heavy brass regulator, quick disconnect handle with snap-in tips machined from solid brass and stainless tubing.
  • GA-3 tip soft solders up to 1-Inch. GA-11 soft solders up to 3-Inch. Compare with Turbo Torch.
  • Also includes: HA3-12-Feet (A) hose, GG-4 quick disconnect handle, MA-2 cylinder wrench and EA-1G brass regulator for B acetylene cylinders.
Check Stock

Multitool Wrench, Adjustable Wrench with Flathead Phillips Screwdriver, Nail File, Bottle Can Opener, Screwdriver reservoir, Multifunctional Purpose Stainless Steel Tool (grey)

  • ...ty, and much more. A tool with multiple uses and more usages are waiting for you to open..
  • Premium Material: The multi-function bout wrench body is made of selected 2CR13 stainless steel with aluminum handle. 2CR13 steel has stronger sharpness and toughness, increasing its service life, convenient installation and storage of a variety of bits and simple multi-functional gadgets..
  • Satisfactory service: Camping Tools Multi-function Wrench provides free customer service, if you have any questions about multi-tool camping accessories tools, please contact us to ensure that you can buy YOUMI with peace of mind. YOUMI Camping Accessories Wrench Tool is full of confidence and we will help you solve any problem until you are satisfied. We're here to help!.
Check Stock