Best Refrigerant Charging

JIFETOR AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Home Air Conditioning U Charging Hose Low Pressure Measuring Meter 1/4" Fittings Can Tap Quick Coupler, 42" Long

  • AC U CHARGE HOSE: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 42", with one side 1/4" female fittings connected with R134a can tap, and the other side 1/4" female fittings for R134A quick coupler or connect AC service port directly.
  • REFRIGERANT CHARGING GAUGE: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4" big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge. (NOTE: Use valve core tool to unscrew the valve core thimble a little bit if the hose angled connector would not depress the Schrader valve).
  • BRASS QUICK COUPLER AND CAN TAP: Brass straight quick coupler with accurate snap lock and anti-slip knurled grip ring, is easy to connect and disconnect, compatible with all models with R134A suction service port. Brass can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of piercing type re....
Check Stock

JIFETOR AC Charge Hose with Gauge for R134A, Car HVAC Refrigerant Recharge Kit, Home Air Conditioning U Charging Hose Low Pressure Meter 1/4" Fittings Can Tap Quick Coupler Adapter, 42" Long

  • AC U CHARGE HOSE: Refrigerant charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. The total length is 42", with one side 1/4" female fittings connected with R134a can tap, and the other side 1/4" female fittings for R134A quick coupler or connect AC service port directly..
  • REFRIGERANT CHARGING GAUGE: AC low pressure gauge with scale range -30inHg~250PSI, is equipped with metal 2-3/4" big dial, color coded scale to indicate pressure index for R134A, Celsius unit, for monitoring the air conditioning low pressure side pressure easily. Built in calibration screw and no-flutter pointer insure a accurate refrigerant recharge..
  • BRASS QUICK COUPLER AND CAN TAP: Brass straight quick coupler with accurate snap lock and anti-slip knurled grip ring, is easy to connect and disconnect, compatible with all models with R134A suction service port. Brass R134A self-piercing can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of refrigerant bottle opening. Internal pin with sharp tip help to pierce refrigerant bottle easily and quickly. There is also a 1/4" male ....
Check Stock

SURIEEN R134A A/C Charging Hose Can Tap with Gauge Refrigerant/Freon Recharging Hose Kit 1/4” SAE Port for Home & Car Air Conditioning Connect R134A R-12 R-22

  • ♛【R134A REFRIGERANT CHARGE HOSE】 The air conditioning refrigerant auto ac recharge kit with gauge fits for R134A R12 or R22 refrigerant,....
  • ♛【PREMIUM QUALITY】 High quality R134A refrigerant Charging Hose with strong construction. Made of high quality brass alloy and rubber, last....
  • ♛【EASY TO USE】Push & lock coupler with auto shut off, easy and convenient to use. Come with gauge for easily viewing during use and getting a....
  • ♛【DIMENSION】 59" long hose help reach workplace easily, 1/2 thread quick fitting for American and Europe. Locking base clamp help connect....
  • ♛【PACKAGE INCLUDES】R134A air conditioning refrigerant charging hose with gauge, 1Pc Universal Can Tap, and R134A quick coupler, 1/4" SAE M to....
Check Stock

FANOVO Refrigerator Freon Recharge Hose Kit-R134a R12 R22 AC Refrigerant Charging Hose Set with BPV31 Bullet Piercing Tap Valve,R134a Self-Sealing Adapter, for Home AC Refrigerant System (Style 1)

  • ...ealing cans. BPV-31 Bullet Piercing Tap ValveThe bpv31 piercing valve is compatible with 1/4inch, 5/16inch, 3/8inch outside diameter pipes. Our bullet piercing tap valve can replace the part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • Refrigerator Freon Recharge Hose with GuageOne side of the refrigerant charging hose is piercing r134a can tap to directly connect puncture refrigerant cans, the other side is 1/4 SAE female prot to connect refrigerator male port. And the colored dials with fahrenheit gauge has scale readings for R134/R12/R22 as the guage show.
  • Size & MaterialThe total length of the ac refrigerant charging hose is:22.83inch(58cm) from the r134a can tap to 1/4 SAE female port. Others' length is:19inch(48cm). Comepared with others' r134a freon recharge hose, our r134a can tap of this refrigerant charging hose is made of brass and the hose adopted quality rubber material for long time use. More durable and solid.
  • Application This recharge refrigerator kit usually used for home air condition refrigerant systems with R-134a R-12 R-22 types freon. With the r134a self sealing adapter, this refrigerator freon recharge kit can compitable with not only piercing r134a cans but also self sealing cans. Maximize to your needs as ....
Check Stock

3 Pieces Set A/C R134A Refrigerant Charging Hose R134A Charging Hose Quick Couple, 1/2 in Male 1/4 in SAE Female Can Tap Valve, BPV31 Bullet Piercing Tap Valve Compatible with GPV14 GPV31 GPV38 GPV56

  • Package information: 3 pieces set in total, come with 1 piece R134A charging hose with gauge and 2 pieces BPV31 bullet piercing tap valve kit, each kit includes 1 piece piercing valve, 1 piece hex key and 2 pieces adapters.
  • R134A refrigerant charging hose: the length of charging hose is approx. 59 inch/ 149.8 cm, charging hose comes with pressure gauge for easily viewing during use, pressure gauge scale is 0 – 200 PSI, the 1/2 inch end fits R12, R22, R502 fittings,the R134a can tap is only suitable for R134A refrigerant of vehicle or home air-conditioning.
  • BPV31 bullet piercing tap valve: it can replace part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, it is compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
  • About material: the bullet piercing tap valve is made of corrosion-resistant metal mainly, not easily worn out or rust, the refrigerant charging hose is made of rubber material mainly, it is resistant to high pressure.
  • Easy to install: you just need to install bullet piercing tap valve by the hex key in the package, the installation process will not take up too much space, easy and convenient, using bullet piercing tap valve can effectively avoid accidental discharge of refrigerant.
Check Stock

JIFETOR AC Charge Hose with Gauge, Car R134A Refrigerant Recharge Kit, Auto Air Conditioning U Charging Hose Low Pressure Measuring Meter with 1/2" Can Tap and R134A Quick Coupler, 100PSI

  • ... with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is upto 2500PSI. Total length is 19", ideal for easy to reach AC suction service port, for example the AC connector is right on top of your engine compartment..
  • REFRIGERANT CHARGING GAUGE: Right in the middle of the refrigerant recharge hose, there is a AC low pressure gauge with scale range 0-100PSI / 0-7kg/cm². Equipped with metal scale plate, color coded scale range to mark pressure state with LOW FULL ALERT DANGER. Easy to monitor the automotive air conditioning low pressure side pressure, to insure a accurate R134A recharge..
  • METAL QUICK COUPLER AND CAN TAP: One side is metal quick interface coupler with accurate snap lock and anti-slip grip ring, easy to connect and disconnect, compatible with all models with standard R134A suction service port. The other side is metal can tap with 1/2" female thread interface, can screw to fix on 1/2" male thread of refrigerant bottle opening. T type knobs, easy to operate by fingertips. Internal pin with sharp tip help to pierce refrigerant bottle easily and quickly..
  • MEASURE PRESSURE AND RECHARGE R134A: Start the car, open AC to MAX. Clockwise twist T hand....
Check Stock

UEi HUB6 Smart Refrigerant Charging AC System Diagnostic Kit

  • In App system refrigerant charging calculations.
  • In App temperature split and psychrometric calculations.
Check Stock

Refrigerator Freon Recharge Kit, R134a Refrigerant Recharge Kit, Fridge Recharge Kit, with 1 BPV31 Bullet Piercing Tap Valve, 1 R134a Self-Sealing Adapter, for Home AC Refrigerant System

  • 【R134a Refrigerator Recharge Kit】The ac recharge kit for refrigerator includes: 1pcs fridge r134a refrigerant charging hose with gauge, and piercing r134a can tap, 1pcs RH thread r134a self sealing adapter, 1pcs bpv-31 bullet piercing tap valve.
  • 【R134a Fridge Recharge Hose】One side of the refrigerator recharge hose is puncture style r134a can tap, the other side is 1/4 SAE female prot to connect refrigerator male port. The middle multicolour gauge can read for r134a refrigerant, Colorful gauge design is easy to read.
  • 【RH R134a Self-Sealing Adapter】The RH r134a self-sealing adapter can be used with the puncture type can tap of the charging hose, to connect self sealing r134a refrigerant can.
  • 【BPV-31 Bullet Piercing Tap Valve】The bpv31 piercing valve is compatible with 1/4inch, 5/16inch, 3/8inch outside diameter pipes. Our bullet piercing tap valve can replace the part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • 【Premium Material】The R134A A/C service hose kit is made of metal and high quality rubber material, with solid construction and stable performance.
  • 【Wide Compatibility】The Car HVAC refrigerant recharge kit fits for R134A R12 or R22 refrigerant refrigerant to home air-conditioning or fridge.
Check Stock

FavorCOOL Refrigerator Freon Recharge Kit, R134A AC Refrigerant Charge Hose Set with Pressure Gauge,1/2" Acme, A/C Recharge Measuring U-Hose Can Tap, Perfect for Car AC Air Conditioning Refrigerant

  • Refrigerator Freon Recharge Kit ---- The r134a refrigerator freon charging hose kit includes 1pcs r134a freon recharge hose with gauge,1/2 ACME Thread for America and Europe, and a Metal valve with 1/2" fitting. A/C Recharge Measuring U-Hose Can Tap..
  • Easy Installation ---- R134A refrigerant charge hose has 90 degrees Push & Lock coupler with auto shut off. Easy and convenient to use. This System Refrigerant Charging Pipe with built-in safety valve to prevent accidental venting of refrigerant..
  • Size & Material ---- The AC refrigerant charging hose size is 2 in x 6 in x 2 in. Compared with other companies' r134a Freon recharge hose, our r134a can set hose is made of brass and has adopted quality rubber material for extended use. More durable and solid.
  • Widely Application ---- This recharge refrigerator kit is typically used to add R134A refrigerant to a car or home air conditioner. This refrigerator Freon recharge kit is not only compatible with penetrating R134a cans, but also self-sealing cans. It meets your needs as much as possible and works with high performance..
  • Warm Tips ---- Please note some vehicles' downside A/C connectors are located in shallow spaces and are hard to reach, please make sure the hose's 1/2 ACME connector is fully secure in plac....
Check Stock