Best Refining Slag

YESWELDER Flux Core Mig Wire, Mild Steel E71TGS.035-Diameter, 10-Pound Spool

  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
Check Stock

Swpeet 4Pcs 10 Inch Scratch Wire Brush Welding Hammers Slag Removal Tool with Welding Gloves,10 Inch Welding Chipping Hammer with Steel Coil Spring Handle for Cleaning Removing Slag

  • ☛ 1, What You Get ------ In this kit, You will get 4Pcs 10 Inch Scratch Wire Brush Slag Removal Tool with Welding Gloves. Including 1 piece of wire brush, 1 piece of welding hammer and 1 pair Welding Gloves, In total 4Pcs. Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds..
  • ☛ 2, With A Pair Welding Gloves ------ The Gloves are made from 1.5mm thick and soft leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off..
  • ☛ 3, 1Pcs Scratch Wire Brush ------ Made of stainless steel bristles with wooden handle, sturdy and durable, the total length of the brush is approx. 10 inch/ 25.5 cm, the width of steel wire brush part is approx 1 inch/2.5 cm, the wire's length is approx. 4.3 inch/11 cm, come with a wooden handle and the proper size for easier grip, can bring a comfortable using experience..
  • ☛ 4, 1Pcs Welding Hammers ------ High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length. Spring handle designed to absorb t....
Check Stock

e.l.f Pore Refining Brush and Mask Tool Silicone Spatula Gentle Versatile Applies Foundation Mess-Free Removes Dirt and Makeup Blends Easy To Clean

  • The e.l.f. Pore Refining Brush and Mask Tool provides mess free application..
  • The pore refining brush helps to gently remove dirt and grease from pores..
  • The spatula can also be used to apply foundation..
  • The pore refining brush can also be used for blending color to create a flawless finish..
  • Cruelty-free, vegan and 100% free from Phthalates, Parabens, Nonylphenol, Ethoxylates, Triclosan, Triclocarban, and Hydroquinone..
Check Stock

Vaper 41225 Chipping Hammer

  • ✔️What You Get? --- In this welding slag removing tools kit, there is 1 piece 10 Inch Welding Chipping Hammer with Coil Spring Handle & 1 Durable Scratch Wire Brush. Besides, there is a Pair of Strong Leather Forge/Mig/Stick Welding Gloves highly resistant to spatter/heat/fire. It absolutely is a great HELPER for you to remove and clean corrosion and slag from most of your welds..
  • ✔️ Size Detail --- Welding Chipping Hammer: 255 × 125 × 20mm/10 × 5 × 0.78 inch (Handle length × Cone part length × Cone part width).
  • Wire Brush: 252 × 120mm/9.9 × 4.7 inch (Total length × Brush length).
  • Welding Gloves: 415mm/16.3 inch (Length)..
  • ✔️ Scratch Wire Brush --- The rust & slag cleaning brush is made of strong steel wire and sturdy wood handle, the ergonomic arc handle provides you comfortable operation feeling, make the cleaning job more fast and relaxing. Its brushing wires are installed firmly, not easy to fall off during use. It also designed with a hanging hole on the end of handle, which is convenient for storage while not use it..
  • ✔️ Welding Chipping Hammer --- This professional welding hammer is forged with premium high carbon steel overal heat treatment, with high hardness, strength and toughness. Designed with a steel coil spring h....
Check Stock

Keadic Professional Welding Slag Removal Tools Kit, including 10 Inch Welding Chipping Hammer with Coil Spring Handle, Welding Plier, Wire Brush & Welding Gloves Heat/Fire Resistant

  • ✔️ Complete Welding Slag Removal Tools Kit --- In our multi-function welding tools set, we prepared 3 practical welding slag removing tools for you, including 1 8 Inch Anti-Rust Welding Plier, 1 10 Inch Welding Chipping Hammer with Coil Spring Handle & 1 Durable Scratch Wire Brush. Besides, there is a Pair of Strong Leather Forge/Mig/Stick Welding Gloves highly resistant to spatter/heat/fire. It absolutely is a great HELPER for you to remove and clean corrosion and slag from most of your welds..
  • ✔️ Anti-Rust Welding Plier --- The pliers body is forged with high quality carbon steel, sturdy and durable, not easy to rust/deform/break.The precise tooth pattern provide it strong clamping force, no-slip. After special heat treatment, the jaws are very sharper and firmer, which improves its service life. Further more, its ergonomic rubber covered handle bring you comfortable touch, suitable for long time operation..
  • ✔️ Scratch Wire Brush --- The rust & slag cleaning brush is made of strong steel wire and sturdy wood handle, the ergonomic arc handle provides you comfortable operation feeling, make the cleaning job more fast and relaxing. Its brushing wires are installed firmly, not easy to fall off during use. It also designed with a hanging hole ....
Check Stock

Swpeet 5Pcs 10 Inch Scratch Wire Brush Welding Hammers Slag Removal Tool with Welding Gloves, 8 Inch Welding Plier and 10 Inch Welding Chipping Hammer with Steel Coil Spring Handle

  • ☛ 1, What You Get ------ In this kit, You will get 5Pcs 10 Inch Scratch Wire Brush Slag Removal Tool with Welding Gloves. Including 1 piece of wire brush, 1 piece of welding hammer and 1 piece welding plier, In total 5Pcs. Which are easy to remove and clean corrosion and slag from most of your welds, Welding chipping hammer and steel wire brush, makes it easy to clean and remove slag from all your welds..
  • ☛ 2, With A Pair Welding Gloves ------ The Gloves are made from 1.5mm thick and soft leather which is heat resistant, wear-resistant, puncture resistant, cut resistant, oil resistant. Reinforced double leather stitching and high strength sewing on the finger, palm, elbow & back of the hand which is not easy to fall off..
  • ☛ 3, 1Pcs Scratch Wire Brush ------ Made of stainless steel bristles with wooden handle, sturdy and durable, the total length of the brush is approx. 10 inch/ 25.5 cm, the width of steel wire brush part is approx 1 inch/2.5 cm, the wire's length is approx. 4.3 inch/11 cm, come with a wooden handle and the proper size for easier grip, can bring a comfortable using experience..
  • ☛ 4, 1Pcs Welding Hammers ------ High carbon steel chipping hammer for maximum strength,10-1/2-Inch overall length. Spring handle designed to absorb the s....
Check Stock

INETUB BA71TGS .030-Inch on 2-Pound Spool Carbon Steel Gasless Flux Cored Welding Wire

  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feed-ability, Easy to weld.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
  • Made in Italy from the finest quality materials using state of the art technology under highly respected labour conditions.
Check Stock

44 lb Roll ER70S-6 0.035\ - 0.045\ Mild Steel Mig Welding Wire (0.035\ X 44#)

  • Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld.
  • Shielding gas is not required, All positions, Single and multi pass welding.
  • Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance.
  • Made in Italy from the finest quality materials using state of the art technology under highly respected labour conditions.
Check Stock

YESWELDER Flux Core Gasless Mig Wire Mild Steel E71TGS.030-Diameter 2-Pound Spool

  • [E71T-GS] Gasless flux cored welding wire AWS E71T-GS, Smooth arc action, High feedability, Easy to weld..
  • [APPLICATIONS] Excellent for outdoor windy conditions, Shielding gas is not required, All positions, Single and multi pass welding..
  • [EXCELLENT PERFORMANCE] Low spatter, Full slag coverage, Easy slag removal, Porosity free, Good bead appearance..
  • [WELDING METHODS] Vertical Welding, Flat Welding, Up Welding, Corner Welding..
  • [SPECIFICATIONS] Weight: 2lbs/Diameter: .030''(0.8mm).
Check Stock