Best Reduction Axle

#NA 1 inch Skateboard Hardware Bolts Bag Packing (Green)

  • The package includes: you will get 16 skateboard truck nuts and 16 axle washers, enough to assemble 4 skateboards to meet your long-term needs.
  • Perform well: the skateboard truck hardware keeps wheels and skateboard trucks tight, axle washers can reduce friction between the bearing and axle nut and hangar, thereby extending the life of the skateboard.
  • Standard size: the skateboard truck axle washers set is suitable for every truck with standard 8 mm axle size, suitable for most skateboards and longboards.
  • Quality materials: skateboard truck nuts and skateboard axle washers are made of quality metal, tough and wear-resistant, well-made, skateboard truck nuts have non-slip rubber rings to avoid falling offPlastic box included: these hardware skateboard truck nuts and axle washers are placed in a transparent plastic box, lightweight and compact in size, easy to carry and store.
  • Plastic box included: these hardware skateboard truck nuts and axle washers are placed in a transparent plastic box, lightweight and compact in size, easy to carry and store.
Check Stock

4 PCS - 2\ Inch x 8 ft Flexible Axle Tie Down All in One Combo Strap with Snap Hook Ratchet 3,300 lbs Safe Working Load - Haul Car, Race, Truck, ATV, UTV SUV Polyester UV Resistant

  • ⭐High Quality Polyester Webbing Material: Hi-Gear Axle Ratchet Tie-Down Straps are made of Polyester Webbing Material and Hi-Test Webbing Protects you from shock during transportation. Polyester Webbing Material is very Soft, Pliable, good heat resistance, good moisture absorption. It is also less susceptible to wear and tear..
  • ⭐Secure Flat Snap Hooks: Hi-Gear Axle Ratchet Straps include Ratchet Buckles, have Flat Snap Hooks on both ends. These Extra-strong Snap Hooks mate easily with axle strap D rings and anchor points on your deck, provides you the most secure connection and you won't lose strap. The snap hooks include spring loaded latches for extra safety..
  • ⭐Strap Size, Break Strength, and Durability: Hi-Gear 2 inches Wide and 8 feet Long axle straps are very Strong and Flexible. And Minimum Breaking Strength of Hi-Gear Flexible Axle Tie-Down Ratchet Straps is 3300lbs. Axle Straps have excellent durability and long service life..
  • ⭐Heavy Duty Axle Straps For Car Trailer: Auto Haulers can use our heavy duty Hi-Gear Axle Tie-Down Straps to create securement around the car's front or rear axles for towing or tie-down purposes. Axle Straps are a must when securing a vehicle for transport by the axle or through the rims..
Check Stock

PRO Driller Tool for use in Derby Cars - Straight Axle Holes - 2.5 Degree Axle Holes - Raised Wheel Hole

  • Drill Axle holes to create perfectly straight or 2.5 degree angled axle holes so your car is fast..
  • Drill new axle holes or drill into existing pine derby axle slots using our exclusive View Port..
  • Drill 2.5 degree angled axle holes to cant your axles to reduce friction – less friction, faster speed!.
  • Drill a "raised wheel" axle hole to reduce friction further. This proven technique WILL make your car faster..
  • Easy slide adjustment fits any car block. Includes instructions and a 2.2mm drill bit for easy axle insertion..
Check Stock

TUSK Racing Axle Block Orange for KTM 530 EXC-R 2008-2011

  • Fitment: The Front Axle Nut Covers Compatible for Harley 2002-2011 VRSC (except VRSCF and VRSCR), for 2015-later XG, for 2008-later XL Sportster , for 2008-2017 Dyna, for 2007-later Softail (except Springer, FLSTNSE, FXCW, FXCWC, FXSB, FXSBSE, FXSE, FXST-Aus, and FXSTD) and for 2008-later Touring and Trike models. 2018-later FLDE, FLFB, FLFBS, FLHC, FLHCS, FLSB, FLSL, FXBB, FXBR, FXBRS and FXLR models require separate purchase of Front Axle Adapter Kit..
  • Package Included: One Pair of Front Axle Nut Cover Bolt Kit.
  • Function: The Front Axle Nut Cover Caps can protect front axle hardware from dirt, moisture, dust..
  • Great Replacement:These Front Axle Nut Cover with spinning blades are great replacement for your old Axle Nut Covers..
  • Material: Housing made of ABS Plastic and inner made of Aluminum.
Check Stock

56 Pieces Skateboard Truck Hardware Kit Includes 8 Pieces Spacers, 8 Pieces Axle Nuts and 40 Pieces Speed Rings for Skateboard and Longboard

  • Package quantity: package comes with 8 pieces skateboard spacers, 8 pieces axle nuts and 40 pieces speed rings, enough quantity to fit on a skateboard or longboard and improve bearing performance.
  • Speed spacer: our skateboard spacer allows you to rotate the axle nut downward all the time, thus reducing slop and increasing bearing life, durability and performance.
  • The +/ -0.02 mm precision tolerance ensures nicely fit and very fast bearing at a time.
  • Speed rings: our speed rings can increase speed and extend longer bearing life by reducing friction among the bearing, axle nut and hangar.
  • Axle nuts: our axle nuts will prevent your wheels from falling off, the more you change your wheels and bearings, the more the axle nuts wear out and lose its tightness.
  • These standard size axle nuts will keep you locked up and will fit most skateboard/ longboard trucks with 8 mm axles (in fact, each truck has a standard 8mm axle size).
  • These axle nuts have thread dimensions of 5/16 inch.
  • Wide application: this skateboard tool kit can be applied for most skateboard/ longboard trucks, they are strong and with proper installation, are resistant to stripping.
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • ⚒️ Quick to Remove CV Axle ⚒️ - With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • ⚒️ Perfect Joint Fork ⚒️ - This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • ⚒️ Heavy Duty ⚒️ -This slide hammer weighs 10.5 pounds and is 19.5 inches long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
  • ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use....
Check Stock

Lesu 1/14 Metal Hydraulic Rc Backhoe Loader Aoue Bl71 2 in 1 Electric Excavator

  • Front and rear aluminum alloy wheels, high-quality rubber tire covers, full drive 4 * 4 power differential locking axle, and the reduction ratio of front and rear axles is 1:2.7..
  • The front shovel is equipped with a stainless steel bucket, and the bucket has a hydraulic opening and closing function..
  • Front fork, hydraulic front shovel, hydraulic bucket, one machine with multiple functions.
  • The rear digging arm is equipped with a digging assembly to move laterally, and the digging range is larger..
  • Hydraulic support leg, more stable operation.The rotary cab seat is convenient for the driver to operate at both ends and has a higher degree of simulation..
  • The hydraulic system is equipped with a hydraulic reversing valve, switching valve, brushless ESC, oil pump, fine stainless steel oil cylinder, overflow valve and other hydraulic components to form a precise hydraulic system, which is more coordinated and linear..
Check Stock

Bent Pine Derby Axle - 1.5 Degree Bend with Easy Turn Screw Driver Slot for Derby Cars - Polished Pre Bent for a Steering Axle 1 axle

  • 1.5 degree bent and polished official steering axle (1 axle), for use in steering a pinewood derby car.
  • Convenient EASY TURN screw driver slot so you can easily turn the axle without damaging it..
  • Official polished axles with burrs removed and underside of axle head angled minimizes wheel contact friction.
  • A single, polished axle from the Official scout derby kit.
  • Pre-bent axle with Easy Turn screw driver slot saves cost of an axle bender tool.
Check Stock

Chorme Spun Blade Spinning Front Axle Nut Cover Cap Nut Cover for Harley

  • Aftermarket replacement parts conceal your front axle hardware for an exclusive skull look.
  • Easy to install, Give the front axle a nice touch that said an improvement over the stock axle exposed.
  • Kindly Remind: Please check the measurement before order, You may have to modify both sides to fit your axle, a spacer might required for smaller axle nut.
  • Tips: Use loctite on screws to secure the caps in place.
  • Package Includes: 2x front axle nut caps, 2x set screws, 1x Allen key.
Check Stock