Best Red Line Laser Modules

50ft Cross Line Laser Level Self-Leveling , L-Bracket Adjustable Mount and Hard Carrying Case

• Automatic self-leveling and manual modes are applied on this 50 ft red beam laser level for construction and renovation. The smart pendulum system ensures level line to be projected on rough surface. By the designated button, automatic self-leveling and manual modes can be switched easily..
• Crossline red beam laser is applied on this self-leveling laser level with the ranges of 150° and 130° for vertical and horizontal lines respectively. The wide ranges of laser lines are helpful for you to work on your projects in most areas..
• The red beam laser level device is designed with IP54 protection (Splash & Dust) for some outdoor and hazardous working conditions. The laser level tool comes with a 360° rotatable magnetic L-shape bracket with a mounting thread of 1/4” to make laser level device can be mounted on an auxiliary tool and be hanged on magnetic objects..
• Two levels of brightness adjustment are designed on this laser level tool for different working contexts. The laser level projects brighter red beam with an accuracy of ± 3 mm/10 m to make your projects can be done precisely..
• This 50 ft red beam line laser level is an ideal gift for father, man, DIYer and handyman..

DECTEAM Self-Leveling Laser Level with Green Beam, Cross Line Laser DIY Horizontal / Vertical Line, 100 ft(30m) Accurate Measurement, IP54 Dust & Water Protection, 2*AA Batteries Included C011G

• GREEN CROSS LINE LASER: C011G adopts advanced light source, the projected cross line is clear and stable without stray light. Green laser are not only brighter than red laser 2 times, the working distance is also farther than the red laser. The stable green laser is very suitable for indoor home improvement DIY, such as laying bricks, installing wall art, door, window or furniture carpentry, hanging wallpaper, etc..
• LASER RANGE and ACCURACY: This laser level uses a horizontal and vertical cross-line green beam laser, the laser line is clear and sharp, and the 110° wide angle easily projects a bright red cross line. Accuracy of horizontal and vertical lines: ± 3 mm / 10 m（± 1/9 in / 10 m）. The 1/4-20 threaded mount can be used with a tripod, Micro-adjust Base, allowing you to easily adjust the angle of the machine for better work..
• SELF-LEVELING & MANUAL MODE: We can switch the two modes of cross-line laser to work by sliding the switch. In self-leveling mode, the laser can self-level within 4° ± 1° of the leveling compensation range. If the tilt angle exceeds 4°, the laser will flash as a warning. In manual mode, you can lock the laser at any angle fo....

IR LED Diode Lasers 808nm 500mW 5.6mm TO-18 Infrared Laser Diode with Pd LD

405nm Violet Blue Purple Laser Dot Diode Module 20mW 13mm x 42mm with US AC Power Adapter

Syongzida Twotrees TT-5.5 Laser Engraver Machine, Laser Cutter Engraving Machine DIY Laser Wood Engraver 300x400mm (20w Input Power& 5.5w Laser Power)(60% Pre-Installed）

• 【5500mW high intensity laser head】 7.5W Output Power, can engrave different material including wood, plastic, paper, bamboo, ox Horn, leather, sponge paper,etcre motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
• 【60% Pre-installed】Fast assembly, save more time. Open structure motherboard with pins reserved for self-development and matching. Replaceable laser module, can install other modules to get different laser power..
• 【Perfectly compatible system】Use LaserGRBL or LightBurn (It's the most popular paid carving software in the world, very easy to use). Supports Windows XP, 7, 8, 10(Use LaserGRBL), Mac OS, and Linux(Use LightBurn)..
• 【Ultra-Fine Compression, Upgraded high-performance fixed-focus laser】Engraving can be done without adjusting the focal length.
• laser power is 5W-5.5W, ultra-fine laser focal area is reduced to 0.23mm^2, The driver and nano on the motherboard are detachable, can be replaced by other chips or modules.Easy to assemble design,It only connect it to the computer, you can print any pictures your like..
• 【Package includes】1pcs Laser Engraver DIY Kit Parts ,1pcs Power supply, 1pcs USB cable ,1pcs Safety glasses..

5mW 650nm Red Laser Diode Cross Module 2 Pack (Red Cross)

• Direct Green Laser Diode for large temperature operation range. Dimensions : Ø0.255" x 0.87" (Ø6.5 x 22.1 mm).
• This module has integrated optic, laser diode, and APC driver circuit. APC Driver Circuit enables the Laser output power safe and constant..
• Aspherical glass lens provides tight Dot Laser in large temperature range..
• Wavelength : 505~530 nm. Laser output power : Class IIIa - less than 4mW..
• Beam Divergence (Half Angle) : 003c0.6 mRad. 3~6 VDC operation. Connection type : Lead wire. Please notice: laser modules are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..

Kiprim Laser Level Self-Leveling Red Beam Horizontal and Vertical Cross-Line Laser for Construction,Picture Hanging,Wall Writing Painting,Home Renovation,Floor Tile, Carrying Pouch, Battery Included

• [HIGH ACCURACY & CROSS LINE MODE]: Laser wavelength: 635nm, power:.
• [AUTOMATIC LEVELING]: Kiprim LV1R laser level is a red cross-line laser, which can automatically level within ±4°. If it is out of range, the laser beam will flash to remind you..
• [FLEXIBLE INSTALLATION MODE]: The bottom of the laser level has an interface connected with a tripod, through which it can be installed on the tripod to achieve 360° rotation..
• [LOCK FUNCTION] Press the top red button for about 3 seconds to turn on the lock function so that you can obtain a tilted laser line when necessary..
• [PACKAGING & WARRANTY] The package contains: 1* cross line laser level, 2*AA batteries, 1* manual, 1* nylon cloth bag. When purchasing Kiprim products, you can enjoy a 30-day unconditional refund, a 1-year warranty, and free lifetime after-sales consulting services..

Johnson Level & Tool 40-6605 Self-Leveling Cross-Line Laser Kit, Red, 1 Kit

• ACCURATE LEVELING: This Johnson cross-line laser projects two crisp, clean laser lines simultaneously - one vertical and one horizontal. It also features a manual mode for use at any angle for working on stairs or other non-level projects..
• SMART DESIGN: The self-level tool features a red laser beam that offers a range of up to 30 ft. for tasks on large jobsites. It includes a manual mode for use at any angle for versatility, and has a 1/4"-20 tripod thread that can be most tripods..
• LOCKING MECHANISM: An inbuilt locking mechanism keeps the pendulum in this cross line level kit protect against eternal damage, sudden movements and forces. The locking mechanism ensures increased life and optimum functioning of the laser..
• HIGH ACCURACY: This laser kit for leveling features a visual out-of-level indicator to ensure accuracy along with safety. This indicator works as an alarm to alert and warn workers by flashing the beam when the laser cannot self-align..
• PRODUCT SPECIFICATIONS: This Self-Leveling Cross and Line Laser Kit includes a Red laser, magnetic target, magnetic bracket, glasses, 2 "AA" alkaline batteries, hard-shell carrying case..

Johnson Level & Tool 40-6603 Self-Leveling Cross-Line Laser, Red, 1 Laser

• ACCURATE LEVELING: This Johnson Laser Tool is designed to complete both indoor and outdoor leveling jobs. It projects a vertical and horizontal laser lines simultaneously to create a cross-line while surveying, guiding, leveling and more..
• SMART DESIGN: The self-level tool features a red laser beam that offers a range of up to 30 ft. for tasks on large jobsites. It includes a manual mode for use at any angle for versatility, and has a 1/4"-20 tripod thread that can be most tripods..
• LOCKING MECHANISM: An inbuilt locking mechanism keeps the pendulum in this cross line level kit protect against eternal damage, sudden movements and forces. The locking mechanism ensures increased life and optimum functioning of the laser..
• HIGH ACCURACY: This laser kit for leveling features a visual out-of-level indicator to ensure accuracy along with safety. This indicator works as an alarm to alert and warn workers by flashing the beam when the laser cannot self-align..
• PRODUCT SPECIFICATIONS: This Red Self-Leveling Cross-Line Laser operates on 2 "AA" alkaline batteries (included) and has a battery life of up to 20 hours..