Best Receiver With Remote

QWinOut 8CH Receiver PWM to PPM Sbus Dbus S-Bus Encoder Signal Converter Module Compatible for DJI Phantom 2 Xaircraft Minix Superx V2

Effective Picture Only, Product Do Not Include The Receiver!.
With This Signal Converter, You Can Be in Average ELF With Ordinary Remote Receiver and Remote Control, and Don't Have to Use Average of Original Remote Control.
With This Signal Converter, You Can Put The Average ELF Remote Control Used in The Ordinary Plane (ELF SBUS For The Remote Control Receiver Signal is Converted Into Common PWM Signal Available To Ordinary Electric Harmonic Steering Gear).
With This Signal Converter, You Can Put The Ordinary Ppm Signal Of The Remote Control Interface (Coach) Into PMW Signal (The Equivalent of a Cable Receiver, Converted To Ordinary PWM Signal Available to Ordinary Electric Harmonic Steering Gear).
Compatibility: compatible for DJI S.Bus Flight Control and Gimbal, Xaircraft Minix or Superx V2.

Check Stock

Xbox One IR Extender Emitter Blaster Cable (4 Head, 10 Foot)

Hidden Infrared Repeater System comes with 1 Receiver, 4 Emitters as well as an Adapter for power supply. You can control up to 4 different devices or A/V components such as cable box, Blu ray/DVD player, amplifer and etc even they are placed inside of your cabinet with door closed and even behind the wall..
Receiver comes with LED confirmation indicator, picks up signal sending from remote control. You should place the receiver pointing straight to where you use remote control..
Emitter sends signal from your remote control to other devices placed behind the door or wall..
The receiver cable comes with a USB plug and the package comes with a 5V adapter. You may either take power from devices with USB port or directly from power point with the use of 5V adapter..
Compatible with all devices within 34 to 60 kHz. Extra Long cable: 6 Feet for Receiver Cable and 9 Feet for Emitter Cable.

Check Stock

2 Pack Universal Ceiling Fan Remote Control Kits, Wireless Remote and Receiver Kits for Harbor Breeze Hunter Honeywell Hampton Bay Kichler Ceiling Fan lights, Fan Speeds Lamp ON/OFF and Timing Control

...an remote controls kit can be installed over pull chain switch or wall switch ceiling fan. No need to take off the light kit and blades. Only 5 wires hookup. All we need to do is loosen the collar at the ceiling, let it slide down to reveal the wires and access into the electrical can. Two wires for powering on the receiver, and three wires into the fan to control the fan and light..
RF Wireless Remote Control with Strong Signal - Each receiver supports to pair with 5 remote controls. While you can also install with serval ceiling fan lights in one room without interaction. There is a one-to-one correspondence between the remote control and the receiver.And no problem with signal, you can adjust the fan from another room, or even downstairs..
Wide Scope of Application - Recommend this wireless universal remote for ceiling fan and light to anyone wanting to convert a manual chain-pull ceiling fan and light to remote control one. It can be widely used at home, restaurant, office, hotel, the club, garage, and so on. PLEASE CHECK THE DIMENSION OF RECEIVER CAREFULLY TO MAKE SURE THERE IS ENOUGH SPACE IN THE CANOPY OF YOUR FAN. AND PLEASE NOTE THAT THE RECEIVER DOES NOT HAVE THE FUNCTION OF REVERSE..

Check Stock

SZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter

{IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
Red LED in IR Receiver bulb verifies the signal transmission(Operating range:20-60HZ).
{HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
Route the cable out of sight with a wall mounted HDTV.
Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
{SIMPLE INSTALLATION} of this lightweight IR cable.
Locate the IR Blaster near the source sensor to repeat the signal to the source.
Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
IR Tx and Rx cables have adhesive circles on the back for mounting.
{UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
{USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where yo....

Check Stock

MAISOIE Dog Training Collar, Dog Shock Collar with Remote Range 1300ft, 3 Training Modes, Beep, Vibration, Shock, IPX7 Waterproof Rechargeable Electric Shock Collar for Small Medium Large Dogs

...collar provides 3 training modes: beep, vibration(0-99 levels), and shock(0-99 levels). And you can rotate the intensity dial to adjust the level of vibration or shock quickly. It helps you to teach dog obedience commands and solve barking, biting, chasing, jumping, digging, and other dog behavior problems. And the receiver will auto-stop if the beep/vibration/shock mode works continuously for more than 10 seconds, very safe and humane..
【Detachable Metal Probes】This shock collar comes with two pairs of metal probes in different sizes, long metal probes for long-haired dogs and short metal probes for short-haired dogs. You can choose the most suitable pair according to the thickness of your dog’s hair. Note: The metal probes are detachable. If you don’t need the shock function, you can remove the metal probes to reduce the friction on the dog’s neck..
【Triple Safety Settings】You can turn off the remote to save energy and prevent any misoperation, lock the shock mode to avoid accidental shock, or set the vibration and shock levels to zero to avoid accidental vibration or shock. This dog shock collar can control two receivers at once, so you can train two dogs at the same time. And you can hang the remote on your hand with the lanyard or in....

Check Stock

Cable Matters Infrared Remote Extender Cable, IR Repeater Cable - 10 Feet

IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV.
Blue LED in IR Receiver bulb verifies the signal transmission.
Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor.
Route the infrared remote control extender cable out of sight with a wall mounted TV.
Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
Simple installation of this lightweight IR cable.
Locate the IR Blaster near the source sensor to repeat the signal to the source.
Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
IR Tx and Rx cables have adhesive circles on the back for mounting.
USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger.
Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF).
30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.

Check Stock

53T Ceiling Fan Remote Control Replacement for Harbor Breeze Hampton Bay Hunter, Replace 2AAZPFAN53T FAN-53T L3HFAN11T FAN-11T L3HFAN35T1 FAN-35T KUJCE9103 CHQ8BT7030T CHQ7030T UC7030T

⚠️ NOTE: original remote must read FCCID: L3HFAN35T1 or L3HFAN35T on the back or this remote will not be compatible..
INCLUDES REMOTE AND WALL MOUNT BRACKET ONLY - Receiver Sold Separately (receiver is required for remote to work). If you may need a universal receiver that works with this remote please use part number: UC7067FMRX (Anderic).
WARNING: Does not work for LEARNING. Will only work to replace your original, if your original has the DIP-Switches inside battery compartment.
Compatible with FAN30R, FAN-30R receiver, UC7067FMRX receiver..
Requires: 12V "A23" battery - NOT INCLUDED.

Check Stock

HKZOOI Dog Training Collar, Waterproof Shock Collars for Dog with Remote Range 1640 ft, 3 Training Modes, Beep, Vibration and Shock, Electric Dog Collar for Small Medium Large Dogs

...has a 1+2 channel design and memory function for settings, which means you can train 2 dogs at the same time without resetting it. Great for helping correct dog barking, walking, leash training, sitting, aggression, peeing, and other bad behaviors..
【Safe Silicone Cover and Safety Settings】: Our dog shock collar receiver is safe to use since it comes with non-removable silicone protective covers, it would not hurt your dog’s skin when training. In addition, there are anti-accidental shock settings, when you want to switch beep or vibration mode to shock mode, you need to double click the shock mode, then the shock function work. Note: The shock collar for dogs should not be worn longer than 12 hours per day..
【Long Remote Range and Battery Life】: This dog shock collar with remote range of up to 1640ft (550 yards) in barrier-free area, 1000 ft (330 yards) in barrier area, you can train your dog easily both indoors and outdoors. Both receiver and remote are rechargeable, it takes 2-3 hours to be fully charged. The receiver's battery can last for up to 15 days in standby time and 7-10 days in working time, and the remote can last for up to 90 days in standby time and 25 days in working time..
【Adjustable Collar & IPX7 Waterproof Receiver】: Th....

Check Stock

SkyTech SKY-5301 Fireplace-remotes-and-thermostats, Black

Thermostatic gas fireplace remote control with LCD display for standard millivolt valves.
Remote features On-Off/Auto On-Off/Clock/Timer/Up/Down buttons & clear LCD display.
LCD screen displays current room temperature, set thermostat temperature, and time.
Receiver box is designed for millivolt gas valves only and acts as a dry contact switch (the receiver will not output any voltage).
Includes transmitter remote control, receiver box, heat shield, wires with connectors, batteries and instructions.

Check Stock