Best Rca Inputs To Outputs

Better Sound from your Phonograph: How come? How-to!

• CONVERTS PHONO SIGNALS: A turntable preamp that converts phono signals to Line Level Signals. This state-of-the-art circuitry phono preamp can accommodate magnetic pickups with an input sensitivity of 3mV at 50K Ohms.
• LOW NOISE OPERATION: Offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers. The output is 2V max (P-P) at 10K Ohms. It’s better to position the preamp close to the source to reduce unwanted noise and interference.
• CONNECTS TO TURNTABLES: Connect any turntable to modern sound equipment without specialized phono input for amplifying music. For the receiver, this can be connected to speakers, computers, laptops and more.
• SIMPLE PLUG & PLAY: This mini preamp has stereo RCA inputs and stereo RCA outputs. Connect the turntable to the RCA inputs and ground. Then, connect the amplifier receiver to the RCA outputs.

JBL VMA1120 Commercial/Restaurant 70v Bluetooth Mixer/Amplifier+6 Wall Speakers

• ...)2 RockvilIe WET-7020B 5.25" 70V Commercial Indoor/Outdoor Wall Speakers in Black. Features of VMA1120: JBI VMA1120 Commercial/Restaurant 120 Watt Bluetooth Mixer/Amplifier with 5 Inputs. 5-Input Mixer. Supports USB Drives and Bluetooth. 120W, 1-Output Amplifier. Euroblock, RCA, and 1/4" Inputs. Euroblock Outputs. Per-Channel Bass and Treble Controls. Voice-Activated Ducking.
• Front-Panel Display and Controls. Configurable Output Routing. Includes Rack Mount Kit. Specifications: Output Power Per Channel: 120 Watts into 4 Ohms or 8 Ohms. Insertion Loss: 70 V and 100 V Outputs: 1 dB Max. Input Channels: 5. Output Channels: 1. Tone Control: Bass and Treble non-detented potentiometers on each channel Bass: 14 dB @ 50 Hz Treble: 14 dB @ 10 kHz. Bass: 14 dB @ 50 Hz. Treble: 14 dB @ 10 kHz.
• Input Sensitivity: Mic Input: 5.5 mVrms Line Input: 1.3 Vrms RCA Input (Stereo In): 130 mVrms. Mic Input: 5.5 mVrms. Line Input: 1.3 Vrms. RCA Input (Stereo In): 130 mVrms. Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB 70 V/100 V Outputs: 80 Hz to 15 kHz 3 dB. 4/8 Ohms Output: 20 Hz to 20 kHz, 2 dB. 70 V....

BOSS Audio Systems R1002 Car Amplifier - 2 Channel, 200 Watts Max Power, 2 4 Ohm Stable, Class AB, Full Range

• POWER: Maximum Power output of 200 Watts at 2 Ohms into two channels. Maximum power output of 100 Watts at 4 Ohms into two channels.
• HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. Speaker level inputs will be used to connect the R1002 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
• LOW LEVEL INPUTS: Line level inputs, also known as RCA inputs or low-level inputs, use RCA interconnect cables to link the R1002 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
• VARIABLE INPUT GAIN CONTROL: The Variable Input Control allows the amplifier input to match the output signal from the head unit to achieve optimum performance when adjusted properly..
• WARRANTY: BOSS Audio Systems provides a Powerful 6 Year Platinum Online Dealer Warranty so long as the purchase is made through Amazon Dot Com.

AllAboutAdapters 4-Channel HD-TVI HD-CVI AHD RCA Quad Video to HDMI VGA Converter Switcher with Picture-in-Picture Support

• ...nel HD/SD video mixer solution designed for multiple camera or DVR video feeds to be displayed on one screen. Each one of the 4 BNC inputs can accept either HD-TVI, AHD, HD-CVI type HD input or analog BNC/RCA composite video from camera or DVR.
• Provides simultaneous HDMI output, VGA output and 2 BNC/RCA analog video outputs. Doubles as a 4 in 1 out HD-TVI HD-CVI AHD BNC RCA to HDMI VGA converter switcher..
• Able to accept mix of HD-TVI, HD-CVI, AHD and analog BNC/RCA video inputs from camera, DVR and other compatible inputs at the same time. Combine all or selected input video feeds into different styles of split-screen views on one display for preview, live monitoring or video recording..
• Selectable HDMI video outputs at 720p/50Hz, 720p/60Hz, 1080p/50Hz, 1080p/60Hz, 1280x720 pixels and 1980x1080 pixels. Selectable VGA video outputs at 1024x768, 1280x1024 and 1440x900 pixels..
• Easy IR remote control and individual manual push buttons for easy and fast switching between video inputs. Supports total 8 screen modes including: 4-channel quad screen mode 4-channel split screen with overlay of 3 sub video channels onto the main channel screen 3-channel split screen mode 2-channel screen in horizontal split fashion 2-channel screen in vertica....

Portable Bluetooth CD Player,Wall Mountable CD/DVD Player for Home with Remote Control Dust Cover LCD Display Built-in HiFi Speakers FM Radio,Support CD/DVD/MP3/USB/AUX Input Output (Black)

• Technical Pro Professional 4000w Receiver/Amplifier/DVD Player Bluetooth/USB/FM Auto region playback (region free) and PAL/NTSC switch able Display that shows key information about play back Repeat and shuffle playback on USB/SD card inputs Bluetooth compatibility allows for wireless connection to any A2DP device FM tuner with auto scan Bass and treble controls Cooling fan Voltage: 110vPeak Power: 4000 Watts Inputs: RCA, USB, SD Card, Bluetooth (32 GB Max)Audio Outputs: RCA (2CH).
• Audio Outputs: RCA (2CH)Video Outputs: RCA, YUV, RGBLED Effects Outputs: 2Speaker Outputs: Bare speaker wire (2 main speakers, 3 surround speakers)Playback: DVD, DVD-R, DVD-RW, CD-R, CD-RW, VCD, MP2, MPEG4, DIVX, CD-GBluetooth: v3.0 with EDRBluetooth Range: 45 feetMic Input: Dual 1/4" with volume and Echo controlsBuilt-in Features: FM tuner with auto scan, Pal / NTSC SwitchableBuilt-in Fan: YesRemote: YesDimensions: 17" L x 10" W x 5" HWeight: 22.2 lbs.

California Project

• ...It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs.
• Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.
• Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it.
• Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs..
• Warranty - Sound Storm provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality.

Peavey Aureus 28-channel Digital Mixer

Acoustic Audio AA5171 5.1 Surround Sound Bluetooth Home Entertainment System

• ... 2 fronts and center satellite speakers have a 6 foot single RCA cable, 2 rear speakers have 12 foot single RCA cables.
• SYSTEM REQUIREMENTS - Standard US 110V grounded wall plug, any audio device with a standard 3.5mm headphone or RCA stereo or RCA 6 channel surround audio outputs. Use for TV or home entertainment, laptop or PC, DVD or MP3 player, gaming.
• WHAT'S IN THE BOX - Acoustic Audio by Goldwood AA5171 powered subwoofer speaker, 5 passive wired satellite speakers, full function remote, 3.5mm to RCA cable, RCA to RCA jack cable, RCA antenna cable, instruction manual.

Phono Turntable Preamp, Phonograph Preamplifier with RCA Input, RCA/TRS Output, Phono Preamp for Turntable Record Play with 12 Volt DC Adapter

• Convert Phono Signal：The Turntable Preamp Converts phono signals to line level for better sounding audio and volume.This state-of-the-art phono preamp can accommodate all magnetic pickups..
• Low Noise Operation: The Turntable Preamp offers outstanding performance with it’s Low-Noise Audio Operational Amplifiers.Make your vinyl records deliver sound exactly as it’s read from your turntable’s needle..
• RCA Input & RCA /TRS Output: This Mini Preamp has stereo RCA inputs , stereo RCA and TRS outputs. Connect the turntable to the RCA inputs and ground Then, connect the amplifier receiver to the RCA/ TRS outputs(DC 12V Adapter is included)..
• Simple Plug & Play:Connect any Phono Turntable Preamps to modern sound equipment without specialized phono input for amplifying music.Simply hook up the preamp to both turntable and audio device so you can enjoy vinyl in no time..
• 1 Year Warrranty: We guarantee this Electric Phono Preamplifier with both a 30-day, no hassle money back return policy and a 1 year manufacturer’s guarantee..