Best Ratchet Pipe Threader

PVC Cutter 2-1/2\

【Wide range of applications】: The ratchet cutter is designed up to 2-1/2-inch (63mm) outer diameter,cutting knife is very suitable for all kinds of plastic pipes(PVC, CPVC, PP-R, PEX, PE, etc),Great helper for home handy man, plumbers, electricians, and vehicle mechanics..
【Heavy duty】: The tubing cutter blade itself is made of SK5 material with high strength and hardness. The surface is covered with Teflon coating,high hardness,smooth, sharp,Cutting quickly..
【Ratchet design】: The pipe cutting machine adopts ratchet drive technology, cutting pipe with less effort and improving work efficiency. Pressing the self-locking during use can prevent the cutter from springing back, cutting the pipe faster, saving energy and safety.and the triangular convex point design at the blade can better cut the pipe..
【Ergonomic design】: The bottom handle adopts ergonomic grip to protect the hand, which can make single stroke cutting quickly and easily, Suitable for long hours..
【Safe and convenient for you】: Put the pipe to be cut into the corresponding knife edge, and continuously clamp and tighten the handle to easily cut the pipe. After use, just fasten the safety lock at the bottom, and the pipe cutting machine will become small and easy to carry o....

Check Stock

BLUEROCK Tools PTM50-C Electric Motorized Pipe Threader Threading Machine fits RIDGID Dies

Threading machine pipe capacity: 1/2"-2"(DN15-DN50).
3 FUNCTIONS -- This electric threading machine has a 3 in 1 function—threading, cutting, and trimming. The clamping die is stable and reliable, the feed depth of the die can be adjusted for more accurate control.
The cutting knife and trimming knife adopt alloy steel blade, which is fast, stable and efficient..
POWERFUL MOTOR -- This 220V Pipe Threader applies 1HP/750W motor, it has compact structure and strong power. The speed is 23RPM, more efficient and labor-saving..
AUTOMATIC TOOL RETRACTION -- This Power Pipe Cutting Threader adopts the inclined block automatic tool retraction design, without manual control, and can greatly improve the accuracy when machining the thread length..
SELF OILING -- This Tube Cutter has an oil filling system with an oil reservoir, which fills oil through the head and has a constant flow..

Check Stock

WORKPRO Ratchet PVC Pipe Cutter Tool & WORKPRO 25FT Tape Measure

WORKPRO Ratchet PVC Pipe Cutter Tool - The pipe cutter is made of durable hardness aluminum alloy steel with high hardness, good toughness and high strength. The blade is made of 5Cr15MoV, which is not easy to rust, bend and break, and can cut the pipe evenly and accurately, not easy to deviate.
WORKPRO Ratchet PVC Pipe Cutter Tool - Ratchet PVC Cutter is designed to OD up to 2-1/2"(63mm), ideal for cutting all kinds of plastic pipes and tubes (PVC, CPVC, PP-R, PEX, PE, Rubber hose, etc.), it is a must-have cutting tool for your handyman, plumber, electrician and vehicle mechanic.
WORKPRO Ratchet PVC Pipe Cutter Tool - The pipe cutting machine adopts ratchet transmission technology, which can successfully complete the cutting operation with one hand, cutting more labor-saving and improving work efficiency. The ergonomic spring-loaded handle provides a reliable grip and strong bite, increasing productivity with fast cutting, faster positioning and single-stroke cutting. Users can cut pipes in 5 to 20 seconds.
WORKPRO 25FT Tape Measure - The design of wrist strap and belt clip makes the tape measure easy to carry in various occasions.When your hands are not free, you can hang it around your waist or tie it around your wrist. Of course, the design of the s....

Check Stock

Tanstic 3Pcs Ratchet PVC Pipe Cutter Tool and PEX Straight Cut Pipe Cutter with Mini Tube Cutter, Ratchet-type Pipe Cutter One-hand Fast Pipe Cutting Tool PEX Tube Cutters for Pipe Cutting

✔️[Package Includes] You'll get 1pc ratchet-type pipe cutter with max opening of 1-5/8 inch (42mm) and 1pc straight pipe cutter with max opening of 1-3/8 inch (35 mm), 1pc mini tubing cutter, total of 3pcs, which can meet your needs of daily use..
✔️[High-quality Material] Our blades of pipe cutters are made of high-quality SK5 material with Teflon-coated on the surface, durable, sturdy, sharp, not easy to rust or break, high-hardness, good-toughness, which can be used for a long time and help to cut the pipe accurately and effectively..
✔️[Ratchet PVC Pipe Cutter] The large pipe cutter in this kit adopts ratchet drive technology, which enable you to complete the cutting operation with one hand, labor-saving. Besides, this ratchet drive design can provide the function of automatic locking during the cutting process, which can protect users from injury caused by the rebounding blade. And the ergonomic handle is equipped with rubber, comfortable to grip, anti-slip..
✔️[Straight Cut Pipe Cutter & Mini Tubing Cutter] The handle of the straight pipe cutter adopts the lever principle, labor, saving, light, handy. You just need to put the pipe into the knife edge, and then pull and tighten the handle to cut the pipe accurately and evenly. Besid....

Check Stock

RIDGID® 700 41935 Hand Held Power Drive Pipe Threading Machine (Renewed)

RIDGID 700 Power Drive 41935 Pipe Threading Machine (Renewed).
Hand-held power drive pipe threader will thread a variety of pipe..
Heavy-duty, cast-aluminum body provides long operating life..
Pipe Threading Capacity: 1/8 in. to 2 in. (3 mm to 50 mm).
Designed for use with RIDGID 12-R Die Heads..

Check Stock

RCB-1625 Replacement Blade for RI-DGID RC-1625 Pipe Cutter Blade, Tubing Cutter and Ratcheting Plastic Pipe 27858 Model - Cutting Pipes 1/8-inch to 1-5/8-inch O.D. (2 Pack)

▶Replacement Blade◀ Compaitble With RI-DGID RC-1625 Ratcheting Plastic Pipe and Tubing Cutter, for Ri-dgid 27858 RCB-1625 replacement blade is made to be used with The Ri-dgid 23498 ratchet action plastic pipe & tubing cutter..
▶ Easy installation:◀ Since the blade is fixed with screws, the package includes 2 replacement blades and 2 screws for installation and fixing, which is convenient to install and replace the old blade..
▶ Wide range of applications:◀ This is a replacement blade for ratchet pipe cutters, suitable for cutting most plastic pipes (PPVC, CPVC, PP-R, PEX, PE, rubber hose, etc and multilayer tubing Replacement blade only..
▶with for:◀ This replacement pipe cutter blade for the RC-1625 Ratchet Cutter is ideal for pipe 1/8-inch to 1-5/8-inch O.D and multilayer tubing. The premium blade design combined with the pipe cutter's ratchet mechanism reduces the hand force required to cut hard plastic materials.
▶Note:◀ To avoid machines that are not suitable for you, please check the user manual to check your model, if you have any questions in use, please contact us in time, we will reply you within 24 hours..

Check Stock

SYMOTTEC 1/18'' to 3-1/2'' Exhaust Tail Pipe Expander Muffler Spreader Tool Set Compatible with Most Vehicles and Trucks

This Exhaust Pipe Expander Muffler Spreader Tool Set is designed to quickly and easily straighten clamp dents and clamp marks in mufflers and tail pipes, and stretch pipe openings or fix damaged pipe ends. Can be use with a hand ratchet or breaker bar and also a hand wrenches..
This Tail Pipe Expander set includes three different expander sizes, can work with all 1-1/8inch to 3-1/2inch ID thin-wall pipes and compatible with most vehicles and trucks..
Drop forged and heat treated steel construction for strength and hardness and through strict quality inspection. Suitable for family and professional mechanic. Plug and play, you can buy it with confidence..
Kit Includes 1 x small expander: 1-1/8" to 1-3/4", 1 x medium expander: 1-1/2" to 2-1/2", 1 x large Expander: 2-1/8" to 3-1/2, 6 x extra O-rings..
IMPORTANT NOTICE!!! (1) When expanding, the beveled steel cones of the expander must be fully inserted into the pipe, not half.
(2) Try to use a manual ratchet or manual wrench to turn the pipe support tool to expand the pipe, rather than electric Ratchet.

Check Stock

Toledo Pipe 68815 311 Carriage and 42385 312 Lever for 300 Pipe Threader

Toledo Pipe Tools is proud to give you alternative high quality replacement parts..
Replacement 68815 311 Carriage and 42385 312 Lever for 300 Pipe Threader.
Holds RIDGID 811A, RIDGID 360 Cutter and RIDGID 341 Reamer.
Comes with Toledo Pipe Tools 42385 312 Lever Assembly.

Check Stock

SCITOO 3-Pieces Pipe Expander Tool Set 1/18'' to 3-1/2'', Tail Pipe Expander Compatible with Most Vehicles and Trucks

【FUNCTION】 The SCITOO 3-Pieces Pipe Expander Spreader Tool Set is designed to quickly and easily straighten clamp dents and clamp marks in mufflers and tail pipes, and stretch pipe openings or fix damaged pipe ends. Can be use with a hand ratchet or breaker bar and also a hand wrenches..
【CORRECT USE TO AVOID DAMAGE】 Only work with all 1-1/8inch to 3-1/2inch ID thin-wall pipes. Please pay attention when using: (1) When expanding, the beveled steel cones of the expander must be fully inserted into the pipe, not half.
(2) Try to use a manual ratchet or manual wrench to turn the pipe support tool to expand the pipe, rather than electric Ratchet.
(3) Avoid twisting the expander with excessive force..
【FEATURES】 This Tail Pipe Expander set includes three different expander sizes, can work to all 1-1/8inch to 3-1/2inch ID thin-wall pipes. A simple wrench turn expands pipe for system repair and installation..
【SUPERIOR MATERIAL】 1pc small expander: 1-1/8" to 1-3/4", 1pc medium expander: 1-1/2" to 2-1/2", 1pc large Expander: 2-1/8" to 3-1/2, 6pcs extra O-rings. Drop forged and heat treated steel construction for strength and durability and through strict quality inspection. Suitable for family and professional mechanic. Plug and play, you can bu....

Check Stock