Best Raid Compact Case

5 Slot M.2 B-Key SATA Base SSD PCI-e 3.0 x2 Bandwidth Expansion Card Require x16 Slot SI-PEX40142

• Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
• Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
• The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
• You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
• SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..

Oyen Digital Mobius 5-Bay FireWire 800, eSATA, USB 3.0 Raid Hard Drive Enclosure

• Interface: USB 3.0, eSATA, and FireWire 800.
• Simple RAID configuration via switch settings, no software required.
• RAID 0, RAID 1, RAID 10, RAID 3, RAID 5, SPAN, JBOD.
• Note: We recommend using only Enterprise or NAS drives (512e only). The Mobius is not compatible with 4Kn hard drives..

Cable Matters Internal Mini SAS to SATA Cable 3.3 Feet (SFF-8087 to SATA Forward Breakout)

• Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives.
• Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector.
• Leverage hardware raid performance with this SATA multi-lane cable.
• Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters.
• Supports up to 6Gbs data transfer rate per drive.
• DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs.
• 3 foot cable harness of SAS to SATA cable provides sufficient length for internal cable management.
• Slim ribbon cables minimize airflow impact in a computer case.
• Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity.
• Woven mesh sheath covers half of the cable for easy routing.
• P1 to P4 markers provide easy ID after installation.
• Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce ....

Cable Matters Internal Mini SAS to Mini SAS Cable (Mini-SAS to Mini-SAS Cable) 3.3 Feet, 1m

• MULTILANE MINI SAS DATA CABLE directly connects a RAID or PCI Express controller to the SAS backplane of a hard drive bay in a server or workstation.
• Internal, multilane cable with Mini SAS 8087 connectors is used for mass storage interconnection between a SAS controller and a SAS/SATA drive enclosure in a workstation or server.
• LEVERAGE RAID CONTROLLER PERFORMANCE with this straight, 4-lane, high performance internal Mini SAS 4i cable.
• Supports SAS 3.0 12 Gbps performance with compatible SAS or SATA storage systems and hot-swappable SATA/SAS drive bays.
• DIY OR IT PRO INSTALLERS both appreciate the convenience of a heavy duty but flexible cable when expanding storage needs.
• 3 foot mesh harness of internal Mini SAS 36 pin cable is easy to route in tight spaces and provides sufficient length for internal cable management.
• Supports SGPIO feature over integrated internal sideband wires when connected to a managed backplane.
• Ideal component of a professional SAN network.
• ROBUST DESIGN of HBA Host to Target cable includes an industrial grade woven mesh sheath over the individually shielded ribbon cables, cloth tape strain relief to protect the cables without rigidity, and sturdy 36 pin SFF 8087 connectors with stainless steel latches to ensure a solid connect....

Internal Mini SAS SFF-8087 to Mini SAS SFF-8087 Mini SAS Cable, 1.8 FT / 56 cm

• Multilane Mini SAS data cable directly connects a RAID or PCI Express controller to the SAS backplane of a hard drive bay in a server or workstation.
• Internal, multilane cable with Mini SAS 8087 connectors is used for mass storage interconnection between a SAS controller and a SAS/SATA drive enclosure in a workstation or server.
• Leverage RAID controller performance with this straight, 4-lane, high performance internal Mini SAS 4i cable.
• Supports SAS 3.0 12 Gbps performance with compatible SAS or SATA storage systems and hot-swappable SATA/SAS drive bays.
• DIY or IT pro instrallers both appreciate the convenience of a heavy duty but flexible cable when expanding storage needs.
• Mesh harness of internal Mini SAS 36 pin cable is easy to route in tight spaces.
• Supports SGPIO feature over integrated internal sideband wires when connected to a managed backplane.
• Ideal component of a professional SAN network.
• Robust design of HBA Host to Target cable includes an industrial grade woven mesh sheath over the individually shielded ribbon cables, cloth tape strain relief to protect the cables without rigidity, and sturdy 36 pin SFF 8087 connectors with stainless steel latches to ensure a solid connection.
• SFF-8087 host compatible with popular controller HBA cards such....

HornetTek X2 USB 3.0 Type C Gen I & Type A Dual Bay 3.5 HDD Enclosure 5 Gbps Max w/RAID 0 & RAID 1

• Support dual bay 3.5" SATA I / II / III Hard Disk Drive, Supports USB 3.0 Type A & USB 3.0 Type C Gen I Connection.
• Compatible with SATA I and SATA II specification.
• HDD configuration support : JBOD/ Normal/ Raid 0/ Raid 1 / 4 LED indicator for Power ON/Standby and two HDD activities.
• Aluminum case and 5CM cooling fan / Aluminum housing with metal internal hard drive tray.
• 1 Year Warranty from Manufacturer - HornetTek Customer Service Number: (855) 594-3816.

ACASIS PCIe SATA Card, 8 Port with 8 SATA Cables and 2 Power Splitter Cables, SATA 3.0 Controller Expansion Card with Standard Profile Bracket, 6Gbps PCI-E X1 Host Controller Card Up To 80TB Expansion

• Add four independent SATA-I ports to your PCI equipped computer and enjoy the benefits of the optional software RAID configuration for added speed and/or data security with this adapter card.（Note it is PCI card,NOT PCIE card )..
• Plug the SATA RAID PCI card into the PCI slot on your motherboard, and connect SATA devices to the ports on the PCI card using the cables provided, or standard SATA cables of adequate length..
• The card comes with an optional RAID utility which lets you configure a RAID 0 RAID 1 or RAID 0+1 setup on two or more of the SATA ports..
• You can have one RAID 0 or 1 setup and two independent SATA drives two RAID 0 or 1 sets or a single RAID 0+1 set..
• SIL3114 chipset and supports two modes: 32-bit at66MHZ and 64-bit at 133MHZ..

Raid Concentrated Deep Reach Fogger 1.5 Ounce Pack of 1

Raid House and Garden Aerosol, 11 OZ Pack of 4