Best Radius Roller

5\ X 2\ Swivel Casters Heavy Duty Polyurethane Wheel on Steel Hub Supports 4,000lb Total (Does Not Lock), Each Wheel Supports 1,000 lbs (4)

  • PERFECT CASTER ROLLER FOR ANY DIY PROJECT - Comes in a 4 pack. Our Swivel casters are heavy duty and made of polyurethane wheel on steel hub. They do not lock. The radius on the 5"x2" is 360 degrees and supports loads of 1,000 lbs on each wheel, a total of 4,000 lbs..
  • MANY USES: Can be placed on toolboxes, furniture, chairs, musician instrument cases or any project where you need to carry out any activity that requires moving loads from one place to another..
  • MEASUREMENTS: 3/4" Roller Bearing with 1/2" ID Bushing (Manufacture will provide zerk fitting in the wheel or axle). Top Plate: 4" by 4 1/2" Bolt Pattern: 3" by 3" Overall Height: 6-1/2".
  • PACK OF 4: 1 Set (4) Swivel Casters, supports 1,000 lbs each, total support: 4,000 lbs.
Check Stock

Graw Jump Ramps J15-5.9 Wooden Launch Ramp for Skateboard BMX and More

  • The new and exciting BMX Jump works great alone or connect it to the BMX Roller to make the perfect pump track. Transition and radius designed with....
  • Powder- coated cold rolled steel with rubber feet makes it strong, durable, and portable.
  • Designed with a toe piece for a smooth transition..
  • Product Specs: 47" L x 24" W x 16" H , Product Weight: 36 LBS.
Check Stock

KAISH Chrome Guitar Roller Saddle Bridge Tune-O-Matic Bridge with Roller Saddles For Epiphone Les Paul,SG,Dot,Bigsby Guitar with M8 Threaded Posts

  • Precision engineered, with quality Plating. The roller saddles are perfect for using with a Bigsby, or just to reduce string breakages and add sustain on any LP style guitar. This model has 6.3mm post holes to drop over 6mm posts, typically found on most Epiphone guitars and many other similar import guitar brands..
  • Includes anchors and large M8 threaded bridge posts with 6mm diameter top section.
  • High stability saddle retention rings to eliminate saddle rattle.
  • 73.5mm center to center post spacing,Bridge is 14" radius..
  • Tune-O-Matic style bridge with roller saddles for increased tuning stability, higher sustain and less string breakages. 6 saddles with independent intonation adjustment.
Check Stock

Jameson 9A-25-400M Good Buddy III Electrical Fish Tape Duct Rodder with 400 Feet of 3/8-inch Fiberglass Rod Marked Every 5 Feet

  • Bend radius of 7 inches with 1000-pound pull/tensile strength.
Check Stock

6\ X 2\ Swivel Casters Heavy Duty Polyurethane Wheel on Steel Hub Supports 4,800 lbs, 1,200 lb Each Wheel, Set of (4), Perfect for Tool Box, Furniture, Musician Instrument Cases

  • PERFECT CASTER ROLLER FOR ANY DIY PROJECT - Comes in a 4 pack. Our Swivel casters are heavy duty and made of polyurethane wheel on steel hub. They do not lock. The radius on the 6"x2" is 360 degrees and supports loads of 1,200 lbs on each wheel, a total of 4,800 lbs..
  • MANY USES: Can be placed on toolboxes, furniture, chairs, musician instrument cases, trade show crates or any project where you need to carry out any activity that requires moving loads from one place to another..
  • MEASUREMENTS: 3/4" Roller Bearing with 1/2" ID Bushing (Manufacture will provide zerk fitting in the wheel or axle). Top Plate: 3.9 x 4.5 with holes at 2.85 x 3.4.
  • 1 Set- (4) Swivel Casters at 1,200 lbs each, total: 4,800 lbs.
Check Stock

Grasshopper Mower Roller Kit, LHC of Deck, Enhances Trimability Around Trees and Along Fences, Markers and Foundations, Genuine Accessory Parts, OEM 503637

  • ...rating condition. Fewer grease points and easy access to belts and filters translate into less time spent maintaining your mower, and more time using it profitably..
  • GRASSHOPPER INNOVATION: At Grasshopper, one innovation leads to another. As a pioneer in manufacturing zero-radius ride-on mowing equipment, The Grasshopper Company immediately set a pace of rapid advancement and innovation that continues today. When company engineers designed our first Grasshopper mower in 1969, they envisioned a low maintenance, highly maneuverable mower tough enough to serve the commercial mowing industry. They delivered one that would transform the industry for years..
  • LAWN SERVICE SATISFACTION GUARANTEED: Don't cut corners on quality. No matter what Grasshopper mower you own, with a wide range of Grasshopper lawnmower parts available, you'll easily find necessary parts to fix up your machine. You can fully rely on original Grasshopper parts that we provide to repair and extend the operating life of your machine..
  • DESIGNED, ENGINEERED AND ASSEMBLED IN AMERICA: Grasshopper has studied the needs of government entities, turf care pro....
Check Stock

Jameson 11A-25-600M Good Buddy II 3/8 inch Fiberglass Electrical Fish Tape with 600 Feet of Rod Marked Every 5 Feet

  • Includes 600 feet of fiberglass rod marked every 5 feet.
  • Bend radius of 7 inches with 1000-pound pull/tensile strength.
  • Friction brake and safety roller feed for controlling payout.
  • Accessory kit includes end ferrule, splice ferrule, emery cloth and two-component epoxy adhesive.
Check Stock

HXLPAY Radius Jig Router Templates Corner Routing Templates, ABS+CNC high Hardness Processing Glue, Rounded Corners Bit R5 R10 R15 R20 R25 R30 R35 R40 (1 Set of 4 Packs)

  • [High-quality material]: ABS+CNC High Hardness Processing Glue processing..
  • [Size]: The set includes R5, R10, R15, R20, R25, R30, R35, and R40 type corner radius quick clamps, 8 radius angle options..
  • [Professional woodworking tools]: It is designed with three holes to prevent cutting. This set of tools allows you to trim the edges and corners of the board. We call it Radius Quick-Jig (Corner Jig). Use these to cut the outer radius! Practical and professional woodworking tools can make the work smooth and efficient..
  • [Easy to use]: To use, just select the corner of the template to be copied and place it on the desired corner of the wood. A complete set of professional tools, easy to use, allows you to save time, and is still trying to freely handle corners in your woodworking projects..
  • [Product usage name 1]: corner jig corner radius routing templates corner jig router corner radius jig corner routing templates hxlpay radius jig router templates juice groove jig radius corner jig router radius guide woodworking radius jig router templates radius router templates radius routing template radius template radius template router round corner router templates..
  • [Product usage name 2]: router bit radius router corner jig set router corner jig router corner radi....
Check Stock

Jameson 6-14-500M Easy Buddy Electrical Fish Tape Duct Rodder with 500 Feet of 1/4-inch Fiberglass Rod Marked Every 5 Feet

  • Round rod measures 1/4 inch outside diameter with a smooth, non-binding payout and return.
  • Includes 500 feet of fiberglass rod marked every 5 feet.
  • Bend radius of 4 inches with 400-pound pull/tensile strength.
  • Friction brake and safety roller feed to control payout.
  • Accessory kit includes: end ferrule (1), splice ferrule (1), emery cloth (3), two-component epoxy adhesive set (3), canvas pouch (1).
Check Stock