Best Quick Vise

Grip Like a Vice Pt. 2 [Vinyl]

  • FUNCTION: Designed to hold your wood, plastic, metal, tubing, threaded items and irregularly shaped stock material safely in place while protecting them from clamping damage.
  • MAGNETIC: Innovative neodymium magnets ensure a quick, reliable attachment onto your vise, giving you a quick and screw-less installation without the need for additional tools.
  • NON-MARRING: Soft vice jaws are made with a high quality plastic polymer construction, producing a delicate, non-abrasive clamping action that will not scrape, scratch, or scuff your working stock or material.
  • VERSATILE: Possesses a multi-groove design that’s perfect and compatible with an assortment of holding slots for drill presses, vise blocks, mill clamps and other woodworking tools.
Check Stock

MYTEC Home Vise Clamp-On Vise，2.5

  • HOME VISE: Net weight 3.31 lbs, Maximum width of jaw opening 2.5 inch, Jaw width 2.0 inch.
  • EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove.
  • PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end).
  • WIDE RANGE OF USES: This vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work.
  • TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..
Check Stock

MYTEC Home Vise Clamp-On Vise , 3.0"

  • HOME VISE: Net weight 3.62 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch.
  • EASY TO INSTALL: This bench vise can be installed on the edge of all kinds of desktops. The table board up to 2.4 inches thick can be clamped. Convenient and quick to install and remove.
  • PROTECT TABLE TOP: During installation, there is no need for punching on the table, with 2 rubber washers to prevent table scratch and 2 jaw washers for protection of the parts (To ensure good use of rubber gaskets, please refer to the product picture before use. Adjust the fixing chin to a larger opening first, then install the rubber washer in the planned corresponding position, secure it in the end).
  • WIDE RANGE OF USES: This vise can hold a variety of parts，O-shape Swivel base allows vise rotating up to 360-Degree, Even if you are left-handed, you can rotate the vise to the position that suits your work.
  • TIPS: Please carefully browse our product photos to understand the size of each part of the vise before place an order. We promise you that if you have any dissatisfaction with this product, you can enjoy the refund or exchange service at any time without any reason.We welcome you to contact us at any time, we will provide you with a satisfactory solution..
Check Stock

7' Front Vise Woodworking Bench Vise Cast Iron Front Screw Vise Woodworking Front Vise Wood Vise

  • Well Built Quality - Our Front Vise made of high quality steel, resistant to corrosion and rust, sturdy surface greatly reduces the wear rate,and durable to use..
  • Professional Design - This Front Screw Vise for quick sturdy mounting to your workbench. The 7-inch guide bar makes it easy to work and holds things more firmly..
  • Dimension - 1-3/16" diameter x 15-1/2" Length screw，3/4" diameter guide Rods and 10-1/4" width x 19-1/4" Length vise.
  • Easy to Work - Simply pull up on the handle and hold, this will cause the vise nut to disengage. Adjust the jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the product..
  • Widely Used - Useful for woodworking, engineering and welding. Slots in base plate so you can fix the vice to a work table or machine table..
Check Stock

Dremel 2500-01 Rotary Tool Multi-Vise, 3-in-1 Attachment with 360 Degree Stationary Vise, Stand-Alone Clamp, and Tool Holder , Grey

  • Get total control over your project with the Dremel Multi-Vise. The simple-to-use Multi-Vise securely holds your project in place, providing you the freedom to work with both your hands..
  • The Multi-Vise is a 3-in-1 attachment featuring a stationary vice for your work piece, a stand-alone clamp, and a tool holder for your Dremel Rotary Tool..
  • Features an easy-to-adjust 360° rotating base and 50° tilt function to work on your project from any angle. The jaws of the clamp include removable rubber caps and V-grooves to increase grip and protection of your work piece and eliminate the risk of scratches on your valuables while clamping..
  • The quick release button on the Multi-Vise allows you to move, check and re-clamp your work piece with ease and convenience. Vise clamps to any work surface up to 2-1/2 In. thick.
  • Compatible with most Dremel rotary tools, the Dremel Multi-Vise tool holder turns Dremel rotary tools into a stationary sander, grinder or polisher..
  • 1 Year Manufacturer Warranty & USA-Based Customer Service– Available by chat, email, phone or visit us at our service center in Racine, WI.
Check Stock

Wheeler Firearms Accurizing Torque Wrench and Tipton Best Gun Vise for Cleaning, Gunsmithing and Gun Maintenance

  • INCLUDES: Wheeler FAT Wrench & Tipton Gun Vise 10 bits (hex to square adapter, #10 flat blade, #32 flat blade, #11 flat blade, 5/32 hex, 7/64 hex, 3/32 hex, T20 torx, T15 torx & Leupold specialty flat blade), ¼” socket & a convenient plastic storage case.
  • EASE OF USE: Gun Vise features L-shape center support holds break-open guns securely and separate quick-release cam blocks move independently to accommodate any stock shape, FAT Wrench allows for application of repeatable, accurate torque settings.
  • VERSATILITY: Vise is easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects.
  • ACCURACY: Torque Wrench +/- 2 in/lbs up to 40 in/lbs.
  • 40 – 65 is +/- 5%, the Tipton Vise makes it easy to work on your firearms and reach precise specifications during gunsmithing or scope mounting.
  • DURABLE: Bits are made of S2 tool steel and hardened to 56-58 Rockwell “C”, the Vise is made from non-marring, solvent-resistant polymer to stand up to years of hard use for gun maintenance and gunsmithing.
Check Stock

Mini Table Vise Clamp Small Bench Vice For Small Work Hobby Jewelry DIY Craft Repair Tool Portable Work Table Bench Vise Tool Vice

  • [Wide Application] - Used for Small Work, Crafts, Arts, Detailing, Woodworking, Workbench, Soldering, Garage, Hobbies, Finishing, Modeling, Tables, Flat, Angular, and Round Objects.
  • [Easy to Use]- This vise is incredibly easy to use for anyone. Simply turn the bar on top to open and close the clamp onto a table surface and then turn the screw to securely clamp any small objects to work on..
  • [Great for Woodworking]- MUDUOBAN table Vise is ideal for any small woodworking job or project that you may be working on. Clamp down any wooden block for sanding, grinding, detail, drilling, carving, chiseling, and much more.
  • [Mini size and Portable] this vise is not only lightweight, but incredibly durable. Handheld use. It can be installed at the edge of all kinds of desktop, Maximum fixed thickness 1.2"(30mm), quick and easy disassembly.
  • [Durable]- This mini table vise is made of a heavy duty aluminum alloy, strong and sturdy,a handy miniature Vise.
Check Stock

The GolfWorks GGS Golf Club Gripping Station

  • Save valuable time and improve consistency of your regrips with this well-designed Gripping Station.
  • Built to last under high-volume production, the GolfWorks vise mounted gripping station is compact and easy to use.
  • The alignment bar indexes the leading edge of both right- and left-handed woods and irons, ensuring proper alignment.
  • The quick clamp secures any diameter golf shaft and is safe to use with both graphite and steel shafts.
  • The GolfWorks vise mounted gripping station comes complete with a solvent recovery pan and two tape dispensers - one for each of the double-sided tape and build-up tape (Vise not included).
Check Stock

Eclipse Professional Tools EWWQR7 7" Quick Release Woodworking Vise

  • Body and sliding jaw are from high quality grey cast iron and this material has excellent shock absorbing qualities.
  • Slide rods and main screw from steel with a single start thread.
  • Fitted with an adjustable front stop (dog) which gives an additional clamping facility when used in conjunction with a bench stop, this also provides a nromal vise and a tail vise in one tool.
  • Quick release trigger to open and close the vise quickly without using the main screw.
  • For added safety, the tommy bar will bend before the vice becomes over-stressed.
Check Stock