Best Quadcopter Arduino

BETAFPV Cetus Lite FPV Drone Kit for Kids, with Altitude Hold Self Protection Function 2 Speed Modes Support Simulator Ready to Fly Kit for Children Gifts FPV Beginners to Start Flying Indoor

  • 【Altitude Hold, Emergency Auto Locking】Altitude hold keeps the drone hovering at a certain height, combining with the LiteRadio 1 that has two centering gimbals, new beginners can easily control the height of the quadcopter. Integrated with a 6-axis IMU (Inertial Measurement Unit) sensor, which enables the quadcopter to ensure flight safeness. The Cetus Lite quadcopter will automatically disarm the motors when a collision is detected. Guarantees pilots' and property safeness..
  • 【Effective Protection Frame Design】Safety is important, especially for children. The Cetus Lite features a propeller guard design, protecting from users getting hurt. The frame is made of PA12, a high-quality and durable material, allowing it to stay strong and detached even during flight crashes. Users can fly it confidently and has no concern about crashing. This reliable design ensures safe indoor and outdoor flying..
  • 【FPV Simulator Supported】You can learn and practice flying a quadcopter through an FPV simulator before real flying. LiteRadio 1 supports playing FPV simulators like DRL/DCL/Uncrashed/Liftoff. LiteRadio 1 is capable of practicing and charging at the same time..
  • 【VR02 FPV Goggles】Cetus Lite FPV Kit includes VR02 FPV goggles and the quadcopter has a....
Check Stock

2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • ! ! ! Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact us..
Check Stock

That Vibe (feat. Cass XQ)

  • Battery discharge plug: red round banana plug. and attenstion: Red cable is positive, Black cable is negative. Charger plug: XH-3P.
  • Battery dimensions:90*35*16mm/3.56*1.35*0.63 inch. Upgrade capacity,real capacity is 2000-2100mAh. Voltage is 7.4V, Lipo rechargeable battery..
  • Please charge full the battery before use. 7.4V 2000mAh 2S Lipo rechargeable battery with banana plug replacment for Promark P70 RC Quadcopter Drone, battery replacement for S yma X8C X8W X8G X8HC X8HW X8HG X8 RC quadcopter drone..
  • 7.4V 2000mAh 2S Lipo rechargeable battery with banana plug replacement for Vivtar DRC-446 RC Quadcopter Drone with Camera.
  • 7.4V 2000mAh 2S Lipo rechargeable battery with banana plug replacement for RC Car truck RC vehicle ,RC Quadcopter drone ,RC helicopter, RC Aircraft and RC Buggy, which use same battery voltage size and plug..
Check Stock

DJI Phantom 4 Advanced+ (Plus) Drone Quadcopter 4K Camera Built-in LCD on Remote

  • In the Box DJI Phantom 4 Advanced+ Quadcopter GL300E Remote Controller with 1080p Display 4 x DJI 9450S Quick Release Propeller Pair for Phantom 4 / Phantom 4 Pro / Phantom 4 Pro+ Quadcopter DJI Intelligent Flight Battery for Phantom 4 Pro/Pro+ (Standard Edition) DJI 100W Power Adapter for Phantom 4 Quadcopter (Without AC Cable) DJI 100W AC Power Adaptor Cable for Phantom 4 Quadcopter (USA & CA) Gimbal Clap USB OTG Cable Micro-USB Cable 16GB microSD Memory Card Carry Case.
  • 30 Minute flying time, 4.3 mile range, 4K camera.
  • 1" 20MP CMOS Sensor, Gimbal-Stabilized 4K60 / 20MP Imaging.
Check Stock

6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact US..
Check Stock

BETAFPV Cetus Pro Brushless Drone with Altitude Hold Self-Protection Emergency Landing Function Turtle Mode 3 Flight Modes Compatible for FPV Beginner Starters Train Player-to-Pilot

  • 【Equipment】Cetus Pro brushless quadcopter equipped with a Lite 1-2S Pro 12A ESC brushless Flight Controller, 1102-18000KV brushless motors and 40mm 3-blade props. The auxiliary flight function is greatly reducing the threshold of operating, which is capable of performing diverse freestyle tricks. Highly beginner-friendly and training-friendly.
  • 【N/S/M 3 Flight Modes】Normal/ Sport/ Manual are available, which can satisfy the different needs of pilots and adapt to various flight environments. Meanwhile, these 3 modes all support 3 different speeds in SLOW/MID/FAST.
  • 【Altitude Hold Function】Altitude hold function enables Cetus Pro brushless quadcopter to Auto-Hover. The quadcopter can stay at a current height when pilots’ hands are off the transmitter. The barometer/laser achieves accurate and stable positioning, which makes the quad hovering indoors very stable. (The altitude hold function is only available in N mode).
  • 【Self-protection Function】The Cetus Pro quadcopter has an excellent self-protection function. Which can make an emergency landing when it loses control or in low battery. It will also automatically disarm and drop on ground once it has a strong collision with the object. No more worry about loss and crash.
Check Stock

7 Colors 28pcs propellers for DJI Tello Puzzle Drone Mini HD Aerial Photography RC Aircraft Spare Parts

  • Package include: 8 Pack proellers（4A +4B,16 pack screw and 1 screw driver..
  • Props propellers blades spare parts accessories for Blomiky SJRC F11 4K Pro F11 and F11 PRO GPS Brushless RC Drone.
  • Props propellers blades spare parts accessories fit for RUKO F11GIM F11Gim2 F11 PRO F11 4K Pro GPS RC Quadcopter drone.
  • Props propellers blades spare parts accessories fit for DEERC DE22PRO DE22 PRO GPS RC Quadcopter Drone.
  • Props propellers blades spare parts accessories replacement fit for Contixo F24 F24 PRO and F35 GPS RC Quadcopter Drone ,F35 GPS Drone with 4K UHD Camera 2-Axis Self stabilizing Gimbal 5GHz FPV RC Quadcopter.
Check Stock

BETAFPV Cetus Pro FPV Drone Kit with 3 Flight Modes Altitude Hold Emergency Landing Self Protection Turtle Mode with Radio Transmitter Goggles for FPV Beginners Player-to-Pilot Teenager Girls Boys

  • 【Cetus Pro FPV Kit】BETAFPV Cetus Pro FPV Kit is a brushless whoop drone designed from the ground up for FPV beginners. Auxiliary flight function is available for novices, greatly reducing the threshold of operating. Cetus Pro brushless quadcopter is robust and powerful, allowing you to fly faster, race, and even do freestyle flying. Taking you from ZERO to Super Pilot in one kit.
  • 【N/S/M 3 Flight Modes】Normal/ Sport/ Manual are available, which can satisfy the different needs of pilots and adapt to various flight environments. Meanwhile, these 3 modes all support 3 different speeds in SLOW/MID/FAST.
  • 【Altitude Hold Function】Altitude hold function enables Cetus Pro brushless quadcopter to Auto-Hover. The quadcopter can stay at a current height when pilots' hands are off the transmitter. The barometer/laser achieves accurate and stable positioning, which makes the quad hovering indoors very stable. (The altitude hold function is only available in N mode).
  • 【Self-protection Function】The Cetus quadcopter has an excellent self-protection function. Which can make an emergency landing when it loses control or in low battery. It will also automatically disarm and drop on ground once it has a strong collision with the object. No more worry about los....
Check Stock

9V Battery Holder E-outstanding 2PCS Black 6F22 9V Battery Storage Case Box with 2.1x5.5mm DC Male Plug and Wire Leads for Arduino UNO R3 Battery Clip Container

  • Made of high quality materials. Lightweight and easy to carry..
  • Designed with spring clips for easy battery installation and removal..
  • EASY TO INSTALL AND SAVE WORK: The cable comes with a 9V battery holder and 3 screw fixing holes on the base for easy fixation.
  • With this snap cable you can save yourself the work of soldering the battery snap to the DC coax plug.
  • Widely used in Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, Development Boards, Evaluation Boards, Breadboards, Arduino DIY,....
Check Stock