Best Pv Controller

WETOWN Power Station 1500W Solar Generator 1280Wh UPS Battery LiFePO4 Power Station Portable Solar Powered Generators for Home Use Camping RV, 0-100% Fast Recharge in 85 Minutes, 4*AC & PD100W Outlets(1500W)

  • [Tiny but Mighty] - With a 600W AC inverter, 268Wh LiFePO4 battery pack, and 9 outlets, this power station will keep your essential devices powered on the go or during a home power outage..
  • [Ultra-fast Charging] - No bulky power brick, a single cable is good to charge it at most 350W.
  • you also can use the PV+AC together for 80% SOC in just 30 min..
  • [Harness the Power of Sun] - The built-in MPPT controller supports up to 200W of solar input, enabling you to make an ideal solar generator with BLUETTI PV120/PV200 solar panel..
  • [Reliable UPS] - EB3A instantly provides backup power when the grid fails, protecting your desktop PC, file servers, and other sensitive devices from data loss or damage..
  • [What You Get] - BLUETTI EB3A portable power station, AC charging cable, solar charging cable, user manual, 24-month warranty, and friendly customer service..
Check Stock

Victron Energy BlueSolar MPPT 75V 15 amp 12/24-Volt Solar Charge Controller

  • Victron Energy BlueSolar MPPT 75-Volt 15 amp Solar Charge Controller maintains battery health, extending its life.
  • A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest.
  • MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
  • Remotely control and monitor the extensive features of your BlueSolar MPPT solar charge controller by attaching a Bluetooth dongle and pairing it with your smartphone or other device via VictronConnect.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

Inkbird ITC-608T Temperature Controller with Dual Temperature Sensor AC Dual Stage Outlet Thermostat with 12 Period Time Stage 1800W ETL Listed

  • ❤❤【US ETL Certificate Listed 】ITC-608T thermostat temperature controller is ETL listed, and rigorously tested for quality control and safety. More power up to 1800W..
  • ❤❤【Main Functions]】Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • ❤❤【Dual Temperature Sensor]】Temperature sensors are waterproof and the temperature control range is -40~212°F (-40~100°C)..
  • ❤❤【Multiple Functions Temperature and Humidity Control Mode with Dual Relay Output】ITC-608T can work as a temperature controller, a humidity controller, a temperature humidity controller and dual temperature controller..
  • ❤❤【Multipurpose Usage】 Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking. Max Loading: 120V 15A 1800W..
Check Stock

iGreely 10 Gauge Wire Tinned Copper Tray Cable - Connect Charge Controller and Battery for Solar Panel RV Automotive Marine Boat (10FT 10AWG)

  • The iGreely 10 gauge wire can be used for solar panels, DC circuits, Boat, Marine, Automotive, RV and inverter wiring..
  • PV Wire - PV Jacket insulation is thick and sturdy, coated well, durable and very flexible, UV Resistant..
  • Wide temperature range: -40°F to 248°F (-40°C to 120°C), rated voltage is 600V, resistant to acid, alkali, oil and strong oxidation. Chemical, flame, aging, weather resistant and electrically insulating..
  • Heat-shrink tubing insulates wires and one end crimped with 3/8 inch battery terminals, coming with a pair of 5/16 battery terminals can be easily DIY with tools..
  • Positive and negative cables to connect the charge controller to the battery, also can be used as solar wires with tools to cut and crimp with new connectors..
Check Stock

Victron Energy SmartSolar MPPT 100V 50 amp 12/24-Volt Solar Charge Controller (Bluetooth)

  • SmartSolar MPPT 100-Volt 50 amp: A solar charger gathers energy from your solar panels, and stores it in your batteries, Using the latest, fastest technology, SmartSolar maximises this energy-harvest.
  • The Victron Energy SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
  • MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
  • Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

EpRec 30A 12V 24V PWM Solar Charge Controller Compatible with Lead Acid/ Lithium-ion/ Lithium Iron Phosphate Battery

  • 【Upgraded Solar Panel Controller】This 30a solar charge controller compatibility with 12V 24V system.Fully 4-Stage PWM charge (Boost, ABS, Equalization,Float),the power MOSFET is used as and electronic switch without any mechanical switches and equipped with industrial-grade STM 8 microprocessor to prolong your battery life cycle..
  • 【LCD Display】Backlight LCD display PV/Battery/Load charge and discharge parameter.Dual USB can give your electronic product max 5V 2.5A..
  • 【Intelligent Control】This solar controller fit for lithium-ion/ lithium iron phosphate /Lead-acid batteries(OPEN,AGM,GEL,) with mutiple load timer(Load should be DC).It has a wide range of applicability and automatically identifies daytime/night.For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically..
  • 【Safe to Use】PWM charge controller Protection:Dual MOSFET Reverse current /over heat /Under-voltage discharge discharge /short-circuit /open-circuit / over-load /over-charging protection.more safe for home, industrial,commercial etc..
  • 【Customer First】12 months honor warranty from EpRec and 24hrs after service.Your satisfaction is our priority..
Check Stock

30A Solar Charge Controller, Solar Panel Charge Controller 12V 24V Dual USB Charge Regulator Intelligent, Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours(30A)

  • ☀【Dual USB】: This 30a solar charger controller compatibility with 12V 24V system. Fully 4-Stage PWM charge (Boost, ABS, Equalization, Float), the power MOSFET is used as and electronic switch without any mechanical switches and equipped with industrial-grade STM 8 microprocessor to prolong your battery life cycle..
  • ☀【LCD Display 】: Backlight LCD display PV/Battery/Load charge and discharge parameter. Adjustable Floating voltage/LVD/LVR/Load Timer for this charge controller according to needs.ADD Feature: Charge and Discharge Current, cumulative power generation and discharge power query.
  • ☀【Lead-acid Batteries】: Solar Charge controller is only suitable for lead-acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, Liions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
  • ☀【PWM Charge Controller Protection】:Dual MOSFET Reverse current /overheat /Under-voltage discharge discharge /short-circuit /open-circuit / over-load /over-charging protection.more safe for home, industrial, commercial etc.
  • ☀【Easy to Install and Operate】: The charge controller should connect the battery first, then the solar panel, an....
Check Stock

Victron Energy SmartSolar MPPT 150V 35 amp 12/24/36/48-Volt Solar Charge Controller (Bluetooth)

  • SmartSolar MPPT 150-Volt 35 amp, Battery Voltage: 12/24/48V Auto Select (software tool needed to select 36V): A solar charger gathers energy from your solar panels, and stores it in your batteries, Using the latest, fastest technology, SmartSolar maximises this energy-harvest.
  • The Victron Energy SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
  • MPPT Solar charge controller: By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage.
  • Anytime anywhere remotely control and monitor the extensive features of your SmartSolar MPPT solar charge controller with built-in Bluetooth by pairing it with your smartphone or other device via VictronConnect.
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation.
Check Stock

Inkbird Temperature and Humidity Controller ITC-608T Pre-Wired Dual Stage Thermostat 120VAC 15A 1800W ETL Listed Mushroom Greenhouse Homebrew

  • US ETL Certificate Listed. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety..
  • Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
Check Stock