Best Pulling Parts

DURATECH 3-Piece 3-Jaw Gear Puller, 3\

  • ...ed to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

Perfect Paws in 5 Days featuring Jean Donaldson's Modern Dog Training Methods

  • Teach Your Dog To Walk On A Leash Without Pulling - SideWalker creates a more enjoyable walking experience for you and your dog by gently correcting overly enthusiastic leash pulling. The ‘self-teaching’ design assists in reinforcing appropriate leash training..
  • Easy to Use - When the dog pulls on the leash, the pressure of the collar strap on the SideWalker activates either a vibration or a stimulation. The vibration or stimulation gradually increases as the dog pulls and resets when the pulling stops..
  • 5 Adjustable Settings - Select between vibration-only mode, static mode with 3 adjustable intensity levels, or progressive mode. SideWalker collar will help your dog learn appropriate on-leash behavior..
  • Compact Design - At a weight of only 2.0 oz (without strap), this collar is a perfect fit for dogs over 8 pounds that are older than 6 months. Cut to size strap fits necks between 6 - 23 inches. Includes contact points for short and long haired dogs..
  • Designed in the USA - Stateside customer support available by phone or email. The collar is so rugged that we stand behind it wi....
Check Stock

Potty Training Your Puppy: A Simple and Effective Method for Housebreaking Your Puppy

  • Teach Your Dog To Walk On A Leash Without Pulling - SideWalker creates a more enjoyable walking experience for you and your dog by gently correcting overly enthusiastic leash pulling. The ‘self-teaching’ design assists in reinforcing appropriate leash training..
  • Easy to Use - When the dog pulls on the leash, the pressure of the collar strap on the SideWalker activates either a vibration or a stimulation. The vibration or stimulation gradually increases as the dog pulls and resets when the pulling stops..
  • 5 Adjustable Settings - Select between vibration-only mode, static mode with 3 adjustable intensity levels, or progressive mode. SideWalker collar will help your dog learn appropriate on-leash behavior..
  • Compact Design - At a weight of only 2.0 oz (without strap), this collar is a perfect fit for dogs over 8 pounds that are older than 6 months. Cut to size strap fits necks between 6 - 23 inches. Includes contact points for short and long haired dogs..
  • Designed in the USA - Stateside customer support available by phone or email. The collar is so rugged that we stand behind it wi....
Check Stock

Jeemitery 24 Feet Fiberglass Fish Tape Cable Rods, Electrical Wire Running Pull/Push Kit | Fishing Feeder Pole Sticks Snake Tool for Coaxial Wall Wiring

  • Package Included: Made of wear-resistant, corrosion-resistant and anti-oxidation fiberglass material, includes 19 rods (3/16" diameter) with 1 six-inch flexible wire rope connection that can be set to any angle, 1 brass hook end for pulling, 1 brass eye end for pulling, 1 magnetic end for fishing, 1 rounded brass end for pushing,1 Cable Pulling extension cord parts fitting.
  • SPECS: 19 rods, length: 240-Inches , diameter: 3/16” - Flexible acrylic add-on: 6-1/2” – Male/Female brass threaded connectors: 4mm - Kit contains hook & eye ends, and a plastic storage case..
  • QUALITY: The stiff feeder poles are made of high quality nonconductive sturdy fiber glass with solid brass connectors & eye/hook ends, and a bendable acrylic extension..
  • DESIGN: Highly visible yellow shafts simply screw together with special threaded ends extending the tool up to 24Ft., with an acrylic bar that flexes to any angle and a hook and eye attachment making pulling and pushing cables a breeze..
  • USES: The joints are useful for electricians, builders, crafters, engineers, DIY’s when fishing ele....
Check Stock

Light‑Cured Steele Professional Steel Plate Good Performance withdustrial Supplies

  • Easy to pick up, just bend lightly, special surface treatment, make the printed parts better adsorb on the panel..
  • Super strong magnet, designed to resist the pulling force of FEP and maintain chemical exposure..
  • After printing, just bend the printing plate, and then the parts can be taken out..
  • Resilient steel plate, no deformation after repeated bending, has a long service life..
  • Handle design, easy to take and install, convenient to use and with good performance..
Check Stock

Genuine Ford Fluid ZC-30-A Silicone Gasket Remover - 12 oz.

  • Premium Quality - Made of heat treated CR-V steel and chrome vanadium steel shafts, sturdy and sharp..
  • Ergonomic Grip - Non-slip rubber handle assuring precision control, help with precise work like jewelry hand making..
  • Multi-Use - Heavy Duty Hook Set has 4 shapes for pulling clips rings wires gaskets washers and other small parts..
  • Includes - 1pc Scratch Awl, 1pc 90 Degree Hook, 1pc Complex Hook, 1pc Curved Hook.
  • Apply To - Ideal for assembly, repair, or removal of small parts.
Check Stock

uxcell DC Push Pull Type Solenoid Electromagnet, DC5V 18W 0.8N 10mm, Open Frame Type, Linear Motion

  • Pull push type, linear motion, plunger return, DC solenoid electronmagnet..
  • DC Solenoid Electromagnet mainly used in vending machines, transport equipment, office facility household appliance, mechanical, etc..
  • Solenoids of this category work externally through pulling pushing in plunger..
  • When energized, doing work through pulling pushing in plunger joined object..
  • Material:Metal,Electronic Parts.Frame size: 13*16.5*30mm (W*H*L).Plunger Bar Size:6x58mm.Mounting Hole Dia.:2.5mm.Cable Length:20cm.(Unit conversion: 1mm=0.0393iinch, 1cm=0.393inch).
Check Stock

6' CR-V Single Hook Two Claws Puller Separate Lifting Device

  • The product is forged from chrome vanadium steel, the overall high temperature quenching,strong and durable..
  • This tool is a carbon steel wire rod, T-shaped thread, not easy to slip, and the thread is firm, durable and labor-saving..
  • The reasonable design of the pulling claw,The 2-claw design makes it easy to grasp the gears and bearings and pull them out..
  • Ultra-thin Claw, high strength, with elastic metal resistance, The tip of the thimble is a heat-treated round head, not easy to damage other parts, easy installation..
  • specification:Pulling Diameter: 95mm,Screw Length: 165mm,Bracket Length: 159mm,Screw Diameter (top): 14mm,Screw Diameter (bottom): 13mm,Claw Length: 140mm,Claw Thickness: 3-5mm, For more size description please see size picture and video..
Check Stock

Orion Motor Tech 9-Way Slide Hammer Puller Set, Front Wheel Hub Bearing Remover & Rear Wheel Axle Hub Dent Shaft Puller Tool Kit

  • VERSATILE PULLER SET: The Orion Motor Tech 9-Way Slide Hammer Puller Set with 4 lb slide hammer is ideal for a variety of pulling applications, including flange-type rear axles, most front-wheel-drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.)..
  • INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs..
  • ULTIMATE DURABILITY: Built to last with rugged carbon steel alloy and chrome vanadium steel components, our tool kit can withstand accidental drops and years of heavy use without cracking or rusting..
  • INSTRUCTIONS INCLUDED: To help novice DIYers get the job done right, we've included a detailed parts diagram and step-by-step instructions to simplify tough jobs like the piston wind-back process..
  • 1-YEAR WARRANTY: In order to provide a worry-free shopping experience, we promise a 1-year warranty and 100% free exchange if the product is defective. Includes a protective carrying case to extend the life of your tools..
Check Stock