Best Pull Saws

Japanese Pull Saw Professional Ryoba Saw 10 Inch Double Edge Flush Cut Hand Saw with Portable Bag for Woodworking

[Japanese Style Pull Saw] - This Hand Saw cut materials via pulling and thus are called “pull saws”. In comparison to “push saws,” which cut materials via pushing, “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner.
[10 Inch Ryoba Double Edge] - The double sided general purpose carpenter's saw has impulse hardened teeth on both edges of the blade.
The 18 TPI triple-cut coarse teeth for ripping and the other side 6TPI to 10TPI fine teeth for highly precision crosscutting. The length of the blade makes for long pull strokes and therefore fast cutting — cross cut a 2 x 4 in 30 seconds! It enables you to make a wider variety of woodworking products.
[Super-thin Replaceable Blade] - The 0.023 inch thick, 10 inch long blade consisted of top quality japanese steel gives a fine kerf, handling size for highly precision work and provides accurate cuts with much less effort. Plastic head thumb screw makes it release or install the saw blade easily.
[Ergonomics TPR handle] - The ergonomic handles are wrapped with Thermal Plastic Rubber for a secure grip. After working for a long time, it can still make your hands feel comfortable.
[The Organized Saw Bag] - A portable bag for protecting, storaging, carrying and....

Check Stock

Japanese Saw Hand Saw Ryoba Double Edge Pull Saw Interchangeable Flush Cut Saw 10 Inch Flexible Blade Handsaw for Woodworking orange

⚒️ Japanese Saw 22-1/2" Hand Flush Cut Ryoba Pull Saws Flexible Double Edge 10" Blade Impulse Hardened Steel Teeth for Woodworking..
⚒️ The Pull Saw is made of SK5, quenched and tempered good toughness, stronger and more durable.Japanese saws cut materials via pulling, thus they....
⚒️ The japanese razor saw 10" Double Edge Ryoba Hand Saw has a blade length of 10inch and a 12.5 inch Ergonomics TPR handle. In comparison to....
⚒️ A fast, sturdy universal saw - ideal for deep cuts both across and with the grain - in the workshop or building site..
⚒️ One side for ripping, the other for crosscutting, now you only need one saw for all general woodworking tasks..

Check Stock

Japanese Hand Saw Pull Saw Flush Cut Saw Razor Fine Teeth Saw With 8 Inch（200MM）SK-5 Steel Blade For Woodworking

...ose 8" SK-5 steel blade, 0.7mm thick, after electrophoresis technology and high frequency hardening,enables 50hrc for body,enhanced hardness..
【Premium Fine Teeth】：The fine teeth can cut accurately and smoothly. Two staggered rows of triple-cut razor fine teeth (14 TPI ) really makes for ease of cutting on the pull. After the Impulse Hardening process which enables 60hrc for teeth，the teeth is durable, hard to break. The secret of long blade life is here!.
【Ergonomic Non-slip Handle】：Durable and sturdy handle is made of TPE and ABS material, the appearance is beautiful and non-slip.There is a hook hole on the handle，which are convenient to wear and hang..
【Easy to replace the blade】：We provide tooth guard and saw sleeve, Easily replace the blade without tools.And we also spare pull saw blade is provided, give you double use protection..
【Various scene switching use】：This Japanese pull saw is suited for flush-cutting，cross-cutting，rip-cutting，deep-cutting and general purpose,they cut very rapidly and leave an excellent finish.380mm compact body is ideal for the works in confined spaces.In comparison to “push saws,” “pull saws” are lighter in weight, requires less power, and the resulting edge is cleaner..

Check Stock

Weaver Curved Saw Scabbard 27 With Snap Hook, Black

JAPANESE AZEBIKI SAW: Azebiki Saw is used to cut holes, mortises, grooves in mid-panel, and sliding dovetails. These saws are also useful for working in restricted areas without damaging adjacent work—Japanese essential carpentry tools..
UNIQUE ROUNDED BLADE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", (Cross-cut) 0.039" / TPI: (Rip-cut): 7.3, (Cross-cut): 15.3 / Overall Size: 15.8" 2.5"×0.7" / Weight: 2.5 oz.

Check Stock

HACHIEMON Japanese Ryoba Pull Saw Double Edge Hand Saw 180mm (7 Inch) for Woodworking Compact and Smoothly - MOROTEGAKE -

This is a saw for craftsmen made using traditional Japanese methods "MOROTEGAKE"..
The vertical lines on the surface of blades made with the "MOROTEGAKE" technique reduce the drag of each stroke and smoothly remove shavings..
The double bladed saw has a ripping blade and a crosscutting blade..
Blade length: 7.1 inches, total length: 17.7 inches, weight: 3.85 ounces. Made in Japan..
[Important] Japanese saws are pull saws. If you try to saw in a pushing motion the blade may be damaged..

Check Stock

Ryoba 9-1/2inch Double Edge Razor Saw for Hardwoods from Japan Woodworker 1.7mm Teeth Pitch

Made in Japan with durable long lasting Japanese steel. The blade is impulse hardened for extreme sharpness and long life, then coated for corrosion....
Japanese style pull saws are easier to use, and cut very straight and precise lines as compared to push saws.
Adjustable pivot point. There is a joint located in between the blade and blade’s tang that permits the blade and handle to be angled to facilitate....
The traditional rattan wrapped handle is very functional and has timeless styling.

Check Stock

Gyokucho Ryoba Double Edge Razor Saw Long 240mm Model 650 Blade with New TPE Grip

Rip TPI: 7, uses the same blade as the model 650.
Made in Japan with durable long lasting Japanese steel. The blade is impulse hardened for extreme sharpness and long life, then coated for corrosion....
Japanese style pull saws are easier to use, and cut very straight and precise lines as compared to push saws.
Adjustable pivot point. There is a joint located in between the blade and blade’s tang that permits the blade and handle to be angled to facilitate....
Brand new TPE grip provides a solid no slip surface in all conditions.

Check Stock

TIPU Japanese Pull Saw, Double-Edge Hand Saw, 9.5-Inch Ryoba Pull Saw with Aviation Aluminum Alloy Handle for Fine Cutting Woodworking(White)

...n 1】---- The Rip-Cut(9 TPI) blade is for cutting along the wood grain. The Cross-Cut(15 TPI) blade is for precise cutting across the wood grain & fiber at a certain width. The chrome-plated and mirror-polished blade provides clean & accurate cuts with much less effort. .
【JAPANESE STEEL】---- ALL Tipu Japanese pull saw is consisted of top quality Japanese steel, which makes cuts to be sharp. The specially ground, tri-edge teeth are impulse HEAT hardened to retain their toughness, durability and sharpness longer. .
【0.02-Inch Replaceable Blade】---- Easy single screw blade chang feature not only enables fast blade replacement to handle assembly, but also locks the blade securely in the handle. Since the blade is thin and efficient they can be used for delicate work..
【Modern woodworking with new Japanese style saw ---- This Japanese woodworking tool gives you brand new experience from using traditional western style saws whatever you are a master or a beginner in using saws. Ideal for cutting dowels, pegs, tenons, restoration work, furniture, molding and framing, DIY & hobby etc..

Check Stock

KAKURI Azebiki Japanese Saw for Woodworking 3-1/2" Made in JAPAN, Japanese Curved Hand Pull Saw for Hole, Mid Panel, Groove Cutting, Ryoba Double Edge Blade for Rip & Crosscut

... UNIQUE ROUNDED BLADE: The curved blade allows you to start cutting while cutting into a flat surface. The moderately short blade is a real virtue. You can get it into corners that were impossible to reach with any previous saw..
RYOBA DOUBLE-EDGED: Double-edged pull saw for both rip cut and crosscut. You can enjoy silky smooth cutting regardless of the wood grain. All KAKURI saws are manufactured in Japan and handcrafted by Japanese craftsmen..
RAZOR SHARP JAPANESE STEEL BLADE: The blade is made of Japanese steel and you can enjoy the effortless cutting. Japanese saws are used with a pulling force, and their sharpness results in a clean-cut..
PRODUCT SPECIFICATIONS: Made in Japan / Blade: Japanese high carbon steel / Handle: Japanese wingnut, Cane / Blade Length: 3.5" / Blade Thickness: 0.015-0.031" / Kerf Width: (Rip-cut) 0.031", (Cross-cut) 0.039" / TPI: (Rip-cut): 7.3, (Cross-cut): 15.3 / Overall Size: 15.8" 2.5"×0.7" / Weight: 2.5 oz.

Check Stock