Best Pry Bar With Ripping Claw

PacTool RS501 Roof Snake Tool - Shingle Pry Bar - Heavy Duty Nail Remover Tool - Roof Shingle Remover - Professional Roofing Tools

  • COMMERCIAL CROWBAR: Replace old and worn-out composition roofing shingles in no time with our practical pry tool. Our roof snake makes removing and applying new shingles more accurate, efficient, and safer than traditional replacement methods..
  • ROOFING TOOLS AND EQUIPMENT: Never damage your roof again with this convenient pocket pry bar. Install new 3-tab shingles without bending or hitting surrounding shingles or accidentally striking your fingers with your hammer in the process..
  • HAND TOOLS: A must-have for all roofers, this tool is forged from high-strength steel and has a patented offset nail slot feature allowing you to align nails with the correct one-inch offset from the bottom edge of your current course..
  • NAIL PULLER TOOL: There is no need for a flat bar with this handy claw tip, Easily loosen and remove old, damaged shingles and nails by driving the claw end under the nail, rolling the nail out, and twisting the roof snake..
  • PACTOOL: Trusted for decades, we are the leaders in specialized construction, renovation, and remodeling designs. Our cutting-edge product line inspires craftspeople and DIYers to work smarter, measure better, and repair more efficiently..
Check Stock

Deck Demon Wrecking Bar - 44 Inch Steel Deck Board Remover Tool - Save Time Removing Old Boards and Breaking Pallets - Heavy Duty, Non-Slip Handle with Dual Claw Head Nail Puller - Red, DD-201

  • Heavy Duty Demolition & Renovation Tool - Deck Demon is a versatile long handled steel deck pry bar with a dual tine crowbar head to efficiently remove boards, decking, siding, roof, strapping, fasteners, and nails without kneeling or straining your back.
  • Increase Your Efficiency - the breaker bar pry tool features a 44-inch handle with a padded non-slip grip (no gloves necessary) to help reduce your time and labor invested in deconstructing and renovating home improvement projects from a comfortable standing position.
  • Maximum Leverage - this pallet breaker tool straddles the stud/floor joist/beam as a fulcrum point and provides a more stable position for prying to make board splitting more like paper splitting. Great to use as roofing tools, flooring tools.
  • Dual-Claw Head - Deck Demon’s dual-claw head is designed to fit over single and double joists and features 2 beveled cats paw nail puller slots, for removing nails and screws. The patented rocker design removes decking without damaging the joists.
  • Wood Working Tools And Equipment - solid steel, commercial grade demolition....
Check Stock

Trim Puller, Huazu Tile Removal Tool Heavy Duty Pry Bar Molding Removal Tool for Removing Wood Floor, Baseboard, Tiles, Nail Pulling and More, Built In Nail Puller and Socket Wrench

  • WIDE PRY BLADE: The trim puller has a wider pry blade compared with traditional tools, and has a 15 degree wedged center for good leverage, which can improve the removal efficiency and disperse the force to avoid damage to the wall, trim and bottom plate..
  • DESIGN HIGHLIGHT: The sharpening of the cutting edge makes it easier to be embedded in the gap, reducing the damage to the wall and veneer caused by repeated use. The trim removal tool can also be used as a scraper. The nail puller, bottle opener and socket wrench make the trimmer adapted to its work better..
  • DURABLE AND HIGH QUALITY MATERIAL: The trim puller tool is made of durable stainless steel, with excellent corrosion resistance and wear resistance. It will hold up well to repeated whacking and not easy to deform or crack under long-term heavy blows..
  • MULTI-FUNCTION: The heavy duty pry bar is very suitable for disassembling baseboards and molds. It is an ideal choice for disassembling baseboards, door casings, bottom plates, tiles, decorative panels quickly and safely. It can complete all the work of a wrecking bar, flat pry bar and claw..
Check Stock

Goldblatt Trim Puller, Removal Multi-Tool & Heavy Duty Retractable Utility Knife & Claw Hammer with Hickory Handle for Baseboard, Molding, Siding and Flooring Removal, Remodeling

  • 【Trim Removal Tools Set】3 Pieces title removal tools set include 1 piece 10-3/8'' trim puller, 1 piece 16oz. Claw Hammer with hickory handle and 1 piece heavy duty retractable utility knife with 5 pieces extra blades. They will meet your different using requirement, you don’t need to purchase extra tools for your removal job.
  • 【Excellent Trim Remover】Our pry bar is made of 65 Mn steel with black electrophoretic and polished finish for corrosion-resistant. Larger, flatter and wider contact area features an integrated wedged center that provides increased removal efficiency and prevents damage to both the trim and wall. The Build-in spring design assists in separating trim from wall freely and quickly. The 15 degree wedged center for easy extraction of trim and baseboards.
  • 【Solid Hickory Framing Claw Hammer】Claw hammer head made of high-carbon steel for maximum strength, fully polished for rust-resistant and corrosion-resistant. Genuine hickory handle for durability and long life. V-shaped claw design quickly holds and removes nails. Hickory handle provides a comfortable grip and dampens strike vibration, reducing stress on your body.
  • 【Retractable Utility Knife】Features Quick-change mechanism for easy and safe operation,press the black bu....
Check Stock

Crescent Molding Bar Set - 8\

  • Striking Face has ground surface for precision nailing.
  • Precision ground ends for nail pulling with less material damage.
  • Nail slot in both claw and pry ends for access to pulling.
  • Durable high visibility Red finish is corrosion-resistant.
Check Stock

Zenith Industries ZN700001 Trim Puller Black

  • THE ORIGINAL PATENTED TRIM PULLER IDEAL FOR REMOVING BASEBOARDS AND MOLDING: The Zenith Trim Puller is designed specifically for safety removing....
  • WEDGED CENTER PROTECTS THE WALL AND TRIM-NO MORE DAMAGE! The Trim Puller has a larger, flatter and wider contact area that features an integrated....
  • THE AUTHENTIC, REVOLUTIONARY, TRIM PULLER TOOL that does all the work of a wrecking bar, flat pry bar and claw and eliminates the need for a shim or....
  • COMFORT GRIP, SHOCK-ABSORBING EDPM HANDLE: This trim puller is capped off with an EDPM handle that feels comfortable in the hand while offering....
  • DURABLE STEEL CONSTRUCTION-BUILT TO LAST: Made with durable high carbon, heat treated steel with a ground bevel on the edge which allows tool to....
Check Stock

Stanley Hand Tools 55-045 7\ Wonder Bar II Pry Bar

  • Made from high-carbon steel for strength and durability.
  • Tri-lobe design of pry bar helps provide a secure grip for ease of use.
  • High-visibility and powder-coated finish.
  • Slotted claw and bevelled ends for functionality and performance.
Check Stock

MECWORK 7Pcs (8",10",16") Indexing Pry Bar Set, Heavy Duty 7" Flat Pry Bar and 3 screws,adjustable Lady Foot Pry Bar Set for Mechanics

  • Industrial grade standard & 12 years manufacturer: MecWork has ample experience in making indexing pry bar set, high strength chrome vanadium steel in the use of heavy duty equipped with screws can be directly replaced, 3pcs uniform standard manufacturing so you can replace each other adjustable pry bar head use. Otherwise, you still need to spend time to go to the repair store to repair..
  • Flat & Indexing Pry Bar Set Combination：With both crowbar combinations ranging from nails to engines, Indexing Pry Bar is built from sturdy chromium-vanadium steel for automotive repair, engine and construction applications with a 7-inch Bar. Flat Pry Bar perfect for window & door trim, molding and baseboard on nails..
  • Round Button for Flat Head Upgrade:The 14 lock positions and 180° head rotation can be easily adjusted by gently pressing the round button with your thumb, making the product more fluid when adjusting the lock position and reducing wear on the head, further increasing the durability of the pry bar set..
  • 180° Rotation 14 Bar Force Options：Head Rotates 180 Through 14 Locking Positions For Unparalleled A....
Check Stock

K Tool International Pry Bar Set, Lady Slipper Style; Ultra- Strength Heavy Duty Heat Treated Steel, Rolling Head Pry Bars (6\

  • [PRY BAR SIZES] - K Tool International Pry Bar Set comes with 6'',12'',16'',20'' pry bars. This heavy duty pry bar set will complete all of your leverage needs..
  • [ULTRA-STRENGTH] - Pry bar set is made with heat treated steel to proved rolling head with extra durability, strength, and longevity on the job..
  • [SUPERIOR QUALITY] - Heat treated steel provides these pry bars with supieror quality to get any job done. K Tool Intnernational pry bars are made for longevity and are resistant to bending, breaking, or corrosion..
  • [HIGH LEVERAGE] - Pry bars feature high leverage rolling head with long tapered body to align drift. Rolling heads provide high leverage pivot points for heavy machinery, tables etc..
  • [VARIETY OF DUTIES] - Use these rolling head pry bars for many jobs. Align bolt holes on two separate items, wedge pry bar, pull/push seals and bushings into place. Great to move heavy machinery..
Check Stock