Best Pro Grip Clamp

Razor Beast Kick Scooter - Blue

Pro-style stamped steel rear fender brake model.
Fixed riser style handlebar with soft rubber grips.
CNC style steel fork and triple stacked headtube clamp.
Deck length 19" (485mm), 4" (100mm) wide with full deck grip tape.
Metalized 14 spoke 98mm urethane wheels with RZR Pro 20 bearings.

Check Stock

Flybar Outrage Pro Stunt Scooter White

Pro Stunt Scooter with strong grip tape covered deck, reinforced fork and one piece aluminum T- handlebars and double clamps..
Aluminum Pro T-Bar with comfort TPR Grips.

Check Stock

SMALLRIG Camera Cage Accessory Kit for BMPCC 6K Pro, with Top Handle Wooden Side Handle HDMI Cable Clamp SSD Clamp Sunhood NATO Rail Screen Protector for Blackmagic Pocket Cinema Camera 6K Pro- 3299

【For BMPCC 6K Pro】SmallRig Camera Accessory Kit 3299 is specially designed for BMPCC 6K Pro. The package include Camera Cage 3270/Top Handle 2362/Side Handle 2187/Sunhood 3273/SSD Cable Clamp 3300/HDMI Cable Clamp 3271/NATO Rail 2172/Screen Protector 3274..
【Mutifuctional Cage】Special designed aluminum-alloy full cage 3270 can be split as a half cage.The built-in Mount for T5 SSD takes up very little space and improves compactness and suits SSD & USB-C cable clamp to ensure stability and smooth data transmission while shooting. Featuring with multiple 1/4"-20 threaded holes that support additional camera accessories. The threaded holes on the bottom support to attach Quick Release Plates 1280 & 2146 and stabilizer of DJI RS2..
【NATO Top Handle & Side Handle】The NATO top handle 2362 can rotate 360 degrees and secures to any cage with nato rail on the top or side, and features multiple 1/4"-20 and 3/8"-16 threaded holes for accessory attachment. The NATO side handle 2187 fits the curve of hands for a comfortable grip and is designed for quick assemble and disassembly..
【Screen Protect】The sunhood 3327 is easily removable and does not interfere with the flip of the screen, hence a better screen display under strong outdoor light. Besides, t....

Check Stock

Luanke Metal Phone Clamp Magnetic Car Mount [Clip and Remove at Anytime] Metal Phone Clip All Magnet Car Holder cell phone magnetic plate Compatible iPhone 13 Pro Max, Samsung, and More (Silver)

[for All Magnetic Car Phone Holder] - This metal phone clamp works for all kinds of magnetic phone holder. Never need stick the metal plate on your phone and case. Use the 'Metal Phone Clip' is more stable and better than the any metal plate. Strong magnetic adsorption-keep steady when you are driving..
[for All Smartphones from 4.7 - 7 inch]- This phone clamp compatible with iPhone 13/iPhone 13 Pro/iPhone 13 Pro Max/iPhone 12 Pro/12 Mini/12/iPhone11 Pro/11/SE/Xs Max/XS/XR, Samsung Galaxy Note 20/S20 Ultra 5G/20+, LG, Sony, Nexus, OnePlus, Xiaomi, Moto, Vivo,HTC and more..
[Durable Metal Phone Clamp] - This phone clip is tested to withstand 6000 times of clamping tests without loosening. Crafted with solid aluminum alloy body, soft silicone pad, special spring and metal plate, this phone clamp boasts unrivalled durability to stay intact even in dropping accidents. Which are durable and prevents it from fading away. The metal phone clamp is easy to clamp and remove. Features ultra-slim design (6.8mm Thickness)..
[Clip and Remove at Anytime] - Easy to clamp, easy to remove and does not affect wireless charging and is more convenient. Unlimited reuse and anyone can use it. The edges of the phone clip are carefully polished to protect your fingers. Thi....

Check Stock

Steadycam

Our Roxant Pro Video Stabilizer provides less motion and shake compared to other handheld stabilizers. Our custom lower arm no-slip-grip material....
Great design ideal for amateur filmmakers looking to move their films to the next level! Shoot smooth motion shots in tight spaces, on stairs, through....
Our Roxant Video Camera Stabilizer is lightweight, portable, and extremely durable. Including an adjustable phone clamp compatible with almost all....
Compatible with point and shoot, DSLRs, video cameras, GoPros, smartphone and any other camera up to 2.1 lbs..
Features an extremely durable comfort grip handle, and 3 separate graduated counter-weights, for precise adjustments.

Check Stock

SmallRig Battery Grip Compatible Cage Only for BMPCC 6K Pro, Comes with Built-in NATO Rail & Locating Holes for ARRI and Cold Shoe Mount - 3382

... to connect more accessories such as SmallRig Top Handle 2165, and SmallRig SSD Holder 3300 for Samsung T5 SSD, etc..
【FEATURED RECOMMENDATIONS】It features a NATO rail and multiple 1/4" threaded holes on the left side, that could attach NATO Side Handle 2187 for handheld shooting and dedicated HDMI & USB-C cable clamp 3271 for stable signal. The holes at top-right corner and bottom-left corner allow access to follow focus rod clamp 3276. Its bottom is compatible with dual rod clamp 1943, ensuring the distance between the dual rods and the center of the lens is 85mm, and allowing installing lens support..
【SWEET DESIGN】Strap slots are included to add a wrist strap or neck strap for your camera to prevent dropping. Besides, with built-in magnetic suction design, the included screwdriver is ready for your assembly without fear of loss..

Check Stock

Lamicall 2023 Dashboard Car Phone Mount Holder - [Acrylic Clamp Design] 3in1 Long Arm Car Cell Phone Mount, Super Suction Cup, Automobile Dashboard Windshield Vent Accessories Cradle for All iPhone

...ar phone holder mount has extra long extension length 5.3-7.5inches (135-190mm）255 degrees vertical rotatable arm and 360 degrees of rotating ball joint can give you comfortable viewing angle you want..
【Thick Case Friendly & Air Bag Protection】Upgraded 15mm wide clamp arm provide a wider grip, this phone mount for car dash board is suitable for thicker cases, wallet cases or battery cases. Air bag layer on side of clamp provide phone scratch-resistant. Wide compatible with iPhone 14/ Pro/ Max, Iphone 13/ Pro/ Max, Iphone 12/ Pro/ Max/ Mini, Iphone 11, X, XR, SE, 7, 6, Galaxy A51 A51 A31, S21, S20, S10, Note 10 android and more 4-7”..
【Exquisite Acrylic Design】 Based on combining the surrounding color with the translucency of acrylic, so it blends easily with any interior colour. It's unassuming and stylish even when you don't put your phone down. While using the original color design of the mobile phone, it creates a more elegant atmosphere..
【One Hand Place & Pick】 This car dashboard phone mount supports smooth Place & Pick, Only takes 0.5 seconds to release botton with one finger. 36....

Check Stock

Nite Ize Steelie Squeeze Clamp, Magnetic Phone Holder for Dash/Vent/Windshield, Compatible with MagSafe iPhone 12 Pro Max/Mini/Galaxy/Edge/Google Pixel and More

UNIVERSAL FIT - The Squeeze Clamp fits most standard and plus-sized phones, including a case and accessories, up to 2.3” – 3.6” wide | 60mm – 93mm, including the iPhone 12 Pro Max, iPhone 12 Mini, Samsung Galaxy, and more.
EASY TO SQUEEZE - The Squeeze Clamp features two levers at its base that require a simple pinch of your thumb and index finger to open the clamp and place your phone, no extra grip needed.
HOLDS STRONG THROUGH IT ALL -Don't be fooled by its easy-to-squeeze nature - the Squeeze Clamp features inner continuous force springs that amplify the hold of your phone, along with grippy arms to keep it in place through every twist and turn.
COMPATIBLE WITH MAGSAFE + MORE - Squeeze is compatible with MagSafe chargers, accessories, and other wireless charging pads, while also allowing you to easily change your case or phone.
SMOOTH ADJUSTMENT + 360° ROTATION - The Squeeze Clamp magnetically attaches onto any Steelie Mount, allowing for smooth adjustment and hands-free viewing at any angle.
SNAPS ONTO ANY MAGNETIC SURFACE- On top of magnetically attaching to any Steelie Mount, the Squeeze Clamp also snaps onto any magnetic surface for hands-free viewing, from the fridge to the toolbox or car.

Check Stock

VOKUL TRII S2 Stunt Scooter Parts Accessorry- S2 Headset

Vokul selling all vokul pro scooter parts like model S1 S2 K1 K2 and parts including these models clamp,headset,fork,brake and Wheels to make sure all....
The Page have show vokul TRII S2 scooter parts (Clamp,Brake,Headset,Fork) and cusomter who purchased one of above model can contact vokul service team....
TRII S2 Vokul Pro scooter Brake: Made of Mn-Steel,solid,durable,no noise and fast stop..
TRII S2 Vokul Pro scooter Upgradted Clamp:Made of aluminum,solid,triple model,tighten bar and fork. //TRII S2 Vokul Pro scooter Headset:Normal....
TRII S2 Vokul Pro scooter Fork:Normal style,solid,normal fork not HIC or SCS style..

Check Stock