Best Printer Usb Converter

HDMI KVM Switch 2 Port, MT-VIKI 4K@30Hz KVM Switch for 2 Computers Share Keyboard Mouse and One Monitor +2 HDMI KVM Cables + 1 Wire-Desktop Controller

  • ... Share 2 Monitors 】This Dual Monitor HDMI KVM help you control 2 PCs share 2 monitors (Extend display mode or copy display mode) by only one set of USB keyboard & mouse, under the condition of your computers or laptops support multi-display or dual display. If your computer has only one HDMI output, you can use a converter or conversion cable, such as VGA to HDMI converter or conversion cable, DVI to HDMI converter or conversion cable, etc..
  • 【Support 2 Switching Modes】1. Button Switching；2.Hotkey Switch：If you want to make hotkeys work, please make sure the keyboard and mouse plug into the K/M USB ports on the panel（Hotkey switch: Scroll Lock+ Scroll Lock+ 1/2 or Ctrl+Ctrl+1/2). Please Note: when you insert the keyboard and mouse to the USB 2.0 port, it will not support hotkey switching, you can only using button switching under this condition..
  • 【High Compatibility, Match Various Devices】This HDMI Dual Monitor KVM has 2 USB 2.0 ports for sharing USB devices, such as scanner and printer or U-disk, etc. It can identify and match various display devices automatically. Also capacitate itself supports many kinds of input devices or signal sources, such as PCs, Laptop, PS4, PS3 etc. Compatible with a variety of computer systems. It can be wid....
Check Stock

HDMI KVM Switch 2 Port Dual Monitor Extended Display, UHD 4K@60Hz, with 2.0 USB Hub, Remote Switching,Button Switching, PC Monitor Keyboard Mouse Switcher for 2 Computers 2 Monitors with Cables

  • ...ree,Plug and play(Tips :It not support 3.0 USB devices and multimedia /mechanical/game mouse and keyboard).it best dual Monitor KVM can control 2 computers 2 monitors.
  • ♛【Note 1】This dual-monitor KVM switch requires each computer to have 2 HDMI output ports and supports extended display, Not Support DVI to HDMI converter,compatible with DP to HDMI converter/VGA to HDMI converter.If your computer only supports single display, then this product cannot help you get dual display function..
  • ♛【Note 2】Correct operation is each computer has 2 cables(kvm cable and hdmi cable) to connect with dual monitor kvm switch. Note: The Kvm cable's HDMI sides needs to be connected to the M-PC port (Not S-PC port) of the kvm switch to ensure the normal operation of the mouse and keyboard.Kvm cable's HDMI+USB sides must be connected to same PC.
  • ♛【Note 3】When the cable is connected correctly. The initialization step is required. Press and hold the No. 1 key on the panel kvm and keep it for 8-10 seconds until you hear the BEEP sound, the initialization is successful,Otherwise, a black screen may appear.
  • ♛【Note 4】After connecting the computers and the monitors through KVM, you need to set the screen output mode on the computer (press Windows+P) and select ....
Check Stock

USB C to Printer Cable 5ft AkoaDa USB C to USB B Male Scanner Cord Compatible with DIMI Google Chromebook Pixel MacBook Pro HP Canon Printers iPad Pro and More Type-C Devices/Laptops Grey

  • This usb c printer cable is Ideal choice for connecting MacBook to a printer, scanner, printer switch or even external hard drive with USB 2.0 Type B....
  • [ More Stable Data Transfer ] : The USB C to Printer cable,usb b to usb c, usb c to usb b, usb b to usb c cable, usb c printer cable, usb b to c, ipad....
  • [ Extremely Durable ] : this usb b to usb c, usb c to usb b, usb b to usb c cable, usb c printer cable, usb b to c, ipad printer cable adopt nylon....
  • [ compatibility ] : The USB C to Printer cable, usb b to usb c, usb c to usb b, usb b to usb c cable, usb c printer cable, usb b to c, ipad printer....
  • 【Gold-plated Connectors】: iPad printer cable, usb b to usb c,usb c to usb b, usb b to usb c cable, usb c printer cable, usb b to c, ipad printer....
Check Stock

USB C to Ethernet Adapter WALNEW 4-in-1 USB-C to USB 3.0 Hub with Gigabit Ethernet Adapter,Thunderbolt 3 to Gigabit Ethernet LAN Network Adapter for MacBook Pro/Air iPad Pro Dell XPS and More

  • 【4-IN-1 USB C to Ethernet Hub】WALNEW 4 in 1 multi-port hub expand a single USB-C port to 1 gigabit Ethernet LAN Network Adapter with 3 USB 3.0....
  • 【High-Speed 1000Mbps Network Adapter】Obtain an Ethernet data transfer rate of up to 1000Mbps networks and downward compatible with 100/10/1Mbps....
  • 【USB C 3.0】This Type C Ethernet Adapter offers extra 3 USB 3.0 ports for connecting multi devices such as keyboard, mouse, printer, flash drive,....
  • 【LAN to USB-C Adapter Wide Compatibility】WALNEW USB-C Ethernet Adapter is compatible with MacBook Pro 16''/15''/13''(2020/2019/2018/2017/2016),....
  • 【Plug&Play USB C Internet Ethernet Converter】Made of premium anti-fingerprints aluminum shell and braided nylon, this type-c Network Adapter is....
Check Stock

ProHT Pro USB to Parallel Converter Cable (08305)-6.8 Feet, 36 Pin Male USB to LPT Serial Printer Adapter Cable, Plug & Play, Compatible with 8/7/Vista/XP//2000 and Mac OS X 10.6 and Above

  • Pro USB to Parallel Converter (IEEE 1 to 1). Operating Systems: Windows 2000 or later. Full compliance with the USB spec. 1.0. Low power consumption and is powered from USB connection. Full compatible USB host device drivers available..
  • Transparent fully automatic support for true bi-directional communication. Hardware initiates and manages automatic negotiation for the fastest protocol available..
  • Support standard PC parallel port register-based operations.
  • Maximum throughput: 1.216 Mbytes/s (ECP mode). Allows current Microsoft Windows printer drives to print seamlessly to USB..
  • Fully Plug & Play compatible. High-Quality Picture, Sound, and Ethernet in 1 Cable. 100% Lifetime Warranty..
Check Stock

6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro

  • TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision..
  • The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies.
  • these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing..
  • Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market..
  • With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter..
  • The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed)..
Check Stock

4PCS TMC2208 3D Printer Stepper Motor Driver TMC2208 V1.2 Stepstick Stepper Driver Module Carrier with Heat Sink Screwdriver for 3D Printer Controller Boards Ramps 1.4 MKS Gen Mega i3 Ender-3 Pro

  • TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision..
  • The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies.
  • these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing..
  • Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market..
  • With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter..
  • The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed)..
Check Stock

2 Port DP KVM Switch 4K@60Hz, DisplayPort USB Switcher, 2 DP Cables and 2 USB Cables

  • TCNEWCL Displayport KVM Switch: With one set of USB devices such as mouse, keyboard, U disk, printer, etc, and 1 dp monitor, you are able to control 2 computers without repeatedly insert and unplug the cables..
  • 4K@60Hz Output Display: Max support 3840*2160@60Hz resolution, and backward compatible. Please make sure your computers and monitor support 4K@60Hz, and using converter may cause final ouput signal cannot achieve highest resolution 4K@60Hz..
  • 2 DP cables and 2 USB cables Included: 2 Port DP USB KVM Switcher Box includes needed cables, easy install, plug and play. No software and external power adapter required..
  • 2 Switching Modes: Switch between 2 PCs by button on the switch panel or the wired remote controller included in the package. (Not support hotkey switch).
  • Great Compatibility: Driver-free for Windows 10/8/8.1/7/Vista/XP, Mac OS, Linux, Dos system. Perfect for business, office, workstation, meeting room, game room, home theater, or wherever need muliti-computer for work..
Check Stock

The Road to Unfreedom: Russia, Europe, America

  • ...uropean Plug Adapter: The type c plug adapter compatible in most European countries such as Austria, Belarus, Belgium, Croatia, Denmark, Finland, France, Germany, Greece, Hungary, Portugal, Poland, Netherlands, Spain, Turkey, Italy.
  • More country list can be checked in description.
  • 7 in 1 European Adapter: This power converter US to Europe combines 4 AC outlets and 3 USB charging ports, allows you to charge 7 electronics simultaneously.
  • Larger space makes power adapter Europe easier to fit all electric equipment without blocking.
  • European Travel Plug Adapter USB C: Dual USB A ports can charge up to 2.4A, and the USB C port can charge up to 3A.
  • Ideal for cell phone, tablet, power bank, laptop, earphone, etc.
  • NOTE: All the USB ports output: 5V/3A, 15W max.
  • Not a Voltage Converter: The adapters for Europe is not a voltage converter.
  • Please make sure your devices especially your hair dryer, straightener, hair curler, electric toothbrush or electric razor need to support 100V to 250V Dual Voltage.
  • If your device is 110V or 125V only, you will need a voltage converter.
  • International Plug Adapter: This outlet converter US to Europe is compact and lightweight to save your suitcase space for traveling.
Check Stock