Best Print Adhesion Surface

SUNLU 3D Printer Filament PLA Plus 1.75mm, SUNLU Neatly Wound PLA Filament 1.75mm PRO, PLA+ Filament for Most FDM 3D Printer, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool(2.2lbs), Black

【Neatly Wound Filament】SUNLU has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure a neat lines of SUNLU SILK PLA filament with few knots, avoiding possible breaks..
【Good Adhesion】SUNLU SILK PLA filament has the advantages of high purity with good adhesion and superb layer bonding.With SUNLU SILK PLA filament the adhesion to the bed was excellent and had no problems printing single line extrusions with sharp edges..

Check Stock

HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2，Ender-3 3D Printers

The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied..
The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed..
Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃.
Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it..
The size of HICTOP glass bed is 235*235mm（9.25*9.25inch）, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2，Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 Pro，CR-20, CR-20 Pro and similarly sized machines..

Check Stock

250ML Universal Sublimation Coating, Scdom Pretreatment Liquid Coating Fluid for Phones Case, Mug, Glass, Ceramic, Wood, Crystal, Metal, Acrylic, PVC, Stone, Leather, All Hard Surfaces Sublimation

...y any heat and pressure tolerant material into a sublimatable substrate. Sublimation coating is designed for digital printing,it can make the color fastness, transfer works well, pattern delicate and Enhance brightness and vividness of colors, long time not fade..
【Super Adhesion】: The Sublimation coating liquid helps resist abrasions, scratches, rubbing and ink smudging, Enhances adhesion between ink and print surface,make the ink adhere to the printing surface better..
【Speed dry】: Sublimation coating dries out very quickly, This sublimation coating can dry out naturally (24 hours) or in the oven..
【Package】: 1 Bottle 250ml Universal Sublimation Coating, 1 Bottle 15ml Activator, 1 Piece 10ml Syringe, 1 Piece 30ml Measuring Cup, 1 Piece Silicone Brush..

Check Stock

YOUSU Silk Dual Color PLA Filament Coextrusion Filament Silk Rose-Red Blue Color Change PLA, Compatible with Most of 3D Printer,

[Silk Magic PLA filament ] Yousu Coextrusion PLA filament, two color in the same filament. Perfect filament winding that compatible with the most FDM 3D printers..
[Shiny PLA filament] - Without polishing, you can get pearlescent & gorgeous printing surface. Unique based recipe assures less stringing and better overhang performance..
[No warping & Good Layer Bonding] - Excellent first layer adhesion to reduce warpage, shrinkage, curl and print failure. Good layer bonding strength make the printing parts stronger..
[Purity material & Precision Diameter ]- Full 1KG 3D printer filament reel, perfect roundness and 0.03mm diameter tolerance, good winding, avoid print failure jam or clog and making you a smoothly printing & better surface..
[Vacuumed Sealed Package] The Filament Net Weight: 1KG.Yousu PLA filament comes in a sealed vacuum bag with a desiccant bag, keep your 3d printer filament in a good condition to be printed.

Check Stock

YOUSU Silk PLA Filament 1.75mm 3D Printer Filament Coextrusion Filament Dual Color, Compatible with Most of 3D Printer, Silk Blue Green 1kg(2.2lbs).

[Silk Magic PLA filament ] Yousu Coextrusion PLA filament, two color in the same filament. Perfect filament winding that compatible with the most FDM 3D printers..
[Shiny PLA filament] - Without polishing, you can get pearlescent & gorgeous printing surface. Unique based recipe assures less stringing and better overhang performance..
[No warping & Good Layer Bonding] - Excellent first layer adhesion to reduce warpage, shrinkage, curl and print failure. Good layer bonding strength make the printing parts stronger..
[Purity material & Precision Diameter ]- Full 1KG 3D printer filament reel, perfect roundness and 0.03mm diameter tolerance, good winding, avoid print failure jam or clog and making you a smoothly printing & better surface..
[Vacuumed Sealed Package] The Filament Net Weight: 1KG.Yousu PLA filament comes in a sealed vacuum bag with a desiccant bag, keep your 3d printer filament in a good condition to be printed.

Check Stock

Flow Dental 18200 DV-58 Film, Size 2 (Pack of 150)

【8K Better Resolution】 100um thinnest PFA give twice better resolution enhancing 8K print quality..
【50% Less Adhesion】 Pure PFA has 50% less adhesion and give higher success print rate..
【Thinnest & Strongest 100um PFA】 SuperPFA is 100um and it is the thinnest and strongest PFA(nFEP) film in the world..
【x5 Stronger】 Tensile modulus of SuperPFA has 40MPa which is 5 times higher than 6MPa of regular FEP film..
【003e95% or Higher Transparency】 Pure PFA(nFEP), optical grade PET and silicone OCA give more than 95% transmittance..

Check Stock

ION Graphics Magnet Texas Longhorn Magnetic Vinyl Die Cut Decal Cattle Cow 5" Car Magnet Bumper Sticker

We print our magnets at 1440 dpi. That means we can easily match every color and print even the most complex designs. Even highly detailed images always come out awesome. Flexible Vinyl contours over curves – The magnetic strip is thick and flexible, which allows it to make full contact for maximum adhesion, even over curved or uneven surfaces..
We know that a magnet is only as good as its strong magnetic polarity. Like the vinyl we use, we set out to find the strongest magnets. All of our magnets have a very strong polarity that will stick to the surface through extreme conditions and high speeds. We use 0.30 mil magnets made for automotive use only..
Protect your car, refrigerator, or other surface from damage caused by tough adhesives or harsh sticker removal chemicals and tools. Quickly Remove your bumper stickers when you need to – Magnetizing your decals lets you take them off quickly, avoiding the headache of scraping, peeling, and scrubbing off old stickers.
We only use the highest quality material and printing methods. Made in the USA.

Check Stock

Bememo 12 Pieces Sealing Wax Sticks with Wicks Antique Fire Manuscript Sealing Wax for Wax Seal Stamp (12 Colors A)

Package includes: 12 pieces sealing wax sticks with wicks.
Application: suitable for retro letters, envelopes, parcels, wedding and party invitations, bottle-sealing, signatures and so on.
Size: 3.6 x 0.4 x 0.4 inches (90 x 11 x 11 mm).
Features: with smooth surface, strong adhesion and high hardness.
Easy to form sealing surface with glass objects, easy to print, and not easy to break under the external force.
Color: 12 assorted colors, crimson, brown, sparkling red, green, silver, bronze, royal gold, glossy blue, purple, red gold, green gold, amber gold.

Check Stock

SainSmart INFI-20 Belt 3D Printer Infinite Z Belt Printer with Textured Nylon Belt WiFi Printing Filament Break Sensor for Cosplay Props Print Farm Batch Printing 200mm×180mm×∞mm

Infinite Printing: Print a model that is as long you want or print as many items as you need over and over. You are only limited by how much filament....
Easy Setup: The new batch of INFI-20 Belt 3D Printer is not fully assembled. But with an easy-assembly design and the built-in layer test feature,....
Stable CoreXY Structure: Precision Isosceles right-angle structure for rigidity and enhance print stability..
Improved bed adhesion: Textured nylon conveyor belt on the INFI-20 delivers excellent print adhesion and smooth print quality..
Modern UI & SainSmart Slicer: The INFI-20 comes with a straightforward user interface that allows you to keep track of the printer status with ease.....

Check Stock