Best Pressure Equipment

Water Flow Sensor Switch Hall Effect Liquid Water Flowmeter Meter 1-30L/min, DC4.5-18V, Copper - Water Flow Hall Sensor

  • ...ble performance, low water pressure start, easy to install, safe to use. Waterproof, heat resistance, pressurresistance, cold resistance, small size, stable and reliable..
  • ★ Widely Applications ★ Perfectly used for water heaters, pumps, hot tub, boiler, water dispensers, coffee machines, hot card machines, steam equipment, water system, the campus card sales, selling self-help water systems, water treatment equipment, cooling systems, mechanical equipment, instrumentation, pharmaceutical equipment..
Check Stock

ROYPOWER Pressure Washer Adapter Set, M22-14mm Male Fitting to M22-14mm Male Swivel, 5000PSI Pressure Washer Hose Thread Kit

  • PRACTICAL AND CONVENIENT — Both ends of this pressure washer fittings are M22 14mm male thread, which can help you connect your high-pressure cleaning hose with M22 14mm female connector to any power washer equipment with M22 14mm female connector!.
  • UPGRADED REMOVABLE SHELL — The handle of this m22 14mm to 14mm pressure washer swivel kit is made of rubber, which can prevent scratching your fingers, increase the friction between fingers and fittings, help you rotate the pressure washer hose adapter to hoses more easily!.
  • HIGH QUALITY BRASS — This pressure washer hose connector set is made of high quality brass, connected with each part firmly. At the same time, it has corrosion resistance. It is the best choice for both environmental protection and practicality!.
  • EXCELLENT PERFORMANCE — The maximum working pressure of this pressure washer coupler kit is up to 5000PSI, greatly increase your work efficiency!.
  • WIDELY COMPATIBLE — Our power washer m22 fitting is compatible with most pressure washer machines and power washer hoses on the market, such as Simpson and PowerStroke. However, it is not compatible with equipment using M22 15mm thread..
Check Stock

aokur DC 12V 5L Transfer Pump Extractor Oil Fluid Diesel Scavenge Suction Vacuum with Siphon Hose and Cigarette Light 60W

  • Maximum Pressure: Max. 0.8MPA，Maximum Flow: 5L/min, Rated Power: 60W, Rated Voltage: DC 12V.
  • Application: Widely used in general industrial equipment, medical equipment, chemical equipment, shipbuilding, drinks, carpet and floor cleaning, water purification and water treatment equipment, vehicle cleaning, agricultural spraying, zo pipeline pressure, air cleaning cooling, coal and metallurgical industries.
  • Please use when the engine is warm,the engine oil is warm and viscosity is lower,this will be easier and faster to pump.
  • Note: If you want to connect the pump to AC power, you need to have a power converter..
Check Stock

Sunsong 3501105 Power Steering Reservoir Hose

  • Return Hoses exceed original equipment performance standards (SAE J189) with a Max working pressure of 250 psi and are suitable for low pressure high temperature operations.
  • Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 275 degrees Fahrenheit, exceeding original equipment requirements..
  • 24 inch length with 11/32 inch Inner Diameter.
Check Stock

Sunsong 3501038 Power Steering Reservoir Hose

  • Return Hoses exceed original equipment performance standards (SAE J189) with a max working pressure of 250 psi and are suitable for low pressure high temperature operations.
  • Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 275 degrees Fahrenheit, exceeding original equipment requirements..
  • 48 inch length with 3/8 inch Inner Diameter.
Check Stock

Sunsong 3401230 Power Steering Pressure Hose Assembly (Honda)

  • Pressure Hoses exceed original equipment performance standards (SAE J188) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life.
  • All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.
  • Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
  • Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose.
  • Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements.
Check Stock

Sunsong 3402221 Power Steering Pressure Line Hose Assembly

  • Pressure Hoses exceed original equipment performance standards (SAE J2050) with a max working pressure of 1,500 psi a burst pressure rating of 8,700 psi and a tensile strength of 1,600 lb. This provides exceptional durability and long life.
  • All tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.
  • Each hose is precision engineered to exact fit and includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
  • Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new hose.
  • Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements.
Check Stock

Sunsong 3401298 Power Steering Pressure Line Hose Assembly

  • Pressure Hoses exceed original equipment performance standards (SAE J2050) with a Max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. This provides exceptional durability and long life.
  • All tubing is manufactured from high grade Steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime.
  • Each Hose is precision engineered to exact fit and Includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
  • Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose.
  • Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment req....
Check Stock

Elitech PG-30 Blue Digital Low Pressure Gauge for HVAC Refrigerant with Backlight -14.5~500 PSI 1/8” NPT

  • 1.【Manifold Gauge Set for Refrigeration Equipment】The refrigeration gauges are dedicated to installing, testing, and maintaining refrigeration equipment such as air conditioners, refrigerators, and cold storage. The 2 temperature clamps in the manifold gauge set have strong corrosion resistance and tightness, and will not easily break. The refrigerant gauge is also equipped with 3 standard test hoses (1.5m) and a portable toolbox, which is convenient for the storage and carrying of the meter..
  • 2.【Refrigeration Gauges for Double Pressure and Dual Temperature Measurement】The digital HVAC gauges can measure double pressure (gauge pressure) at the same time, as well as dual temperature measurement, with automatic multi-unit pressure conversion, automatic conversion of temperature Celsius / Fahrenheit, to facilitate different needs. Note: Please make sure that the temperature sensor clip is properly connected. A poor connection will result in an inaccurate reading of the value..
  • 3.【HVAC Gauges with High-Precision Data Unit and Refrigerant Database】The HVAC manifold gauge built-in 32-bit digital processing unit and a high-precision data acquisition unit, high data and stability. The a/c manifold gauge set built-in 89 kinds of refrigerant pressure....
Check Stock