Best Press Brake Dies

Temery Watch Press Set, Watch Back Case Closer, Watchmaker Watch Repair Tool Kit with 12pcs Fitting Dies

  • Coming with 12 dies allowing for 50/48mm, 46/44mm, 42/40mm, 38/36mm, 34/33mm, 32/31mm, 30/28mm, 26/24mm, 23/21mm, 20/18mm..
  • ABS plastic dies with a metal screw in the middle make it more durable, and won't scratch your watch..
  • Easy & quick to fix watch: only three steps - choose two suitable dies, screw them on the press tool, and then press down the handle..
  • Good for closing your snap back watch case after repairing job, not for crystal apart. Note: Before pressing the cover, make sure to use the correct fitting dies to avoid damaging the watch..
  • Equipped with a cleaning cloth for padding under your watch while press to protect your watch well..
Check Stock

Hobby Trendy Hand Press Set with Hole Punches Essential Dies for Snap Buttons Eyelets Grommets Rivets Setting Navy Press

  • This Kit includes a Hobby Trendy Hand Press, one 9 mm Single Cap Rivet Dies, 9mm single cap and 9 mm double cap rivet dies.
  • 2 mm hole punches are recommended for 9 mm rivets: 2.5 mm hole punch is recommended for 12.5 and 15 mm snap button dies: 3 mm hole punch will be....
  • Open Ring snap Button dies are for 9.5mm open ring prong snap buttons and no hole punches are needed..
  • All of the dies included in this set works perfect with Hobby Trendy Hand Press that is included in this set. Currently , there are 5 available colors....
Check Stock

VEVOR Brake Line Flaring Tool, 37 & 45 Degree Single, Double, and Bubble Flares for 3/16', 1/4', 5/16' and 3/8' Tube Size, Suitable for Soft Metal of Copper Lines

  • Four Tube Expanding Size: This brake line flaring tool includes 4 dies in the following sizes: 3/16 inch (4.75mm), 1/4 inch (6.35mm), 5/16 inch (8 mm), 3/8 inch (9.5 mm). It creates 37° and 45° single, double, and bubble brake flares in seconds. Reduce the friction on flares to ensure your vehicle operates at optimal performance..
  • Applicable Materials: This double flare brake tool is suitable for expanding copper and aluminum piping. It is an excellent tool for repairs on vehicles or taking lines off of a vehicle. Whether you're working on brake lines, transmission cooler lines, or fuel lines, our flaring tool will help you create the flares you need quickly and easily..
  • Leakproof Connection: With the turret-style design, the professional brake line flaring tool keeps all your dies ready. They are available and within immediate reach with the convenient turret carrier, greatly saving you the hassle of fumbling for small parts or losing them..
  • Vise-Mounted: The brake line flare tool is compatible with a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under a car). The 6.3-inch (16 cm) T-handle screw clamp can hold the die and tube in place firmly without vibration. After repairing, your vehicle will be ....
Check Stock

LYECUN Watch Press Set Back Case Closer, Watch Crystal Press, Watch Press Set, Watch Battery Replacement Tool

  • 【Low Risk】: Unlike ordinary watch press tool, it applies pressure by holding the top handle and turning it, allowing you to easily and flexibly control the pressure during operation, greatly reducing the risk of accidentally crushing the watch glass.
  • 【High Quality】: The watch press tool is made of all metal, the mold is ABS plastic, the net weight of a single watch press tool is 350 grams, it is sturdy and durable.
  • 【Wide Range of Adaptations】: This watch press set comes with 12 dies, including 10 double-sided dies and 2 special dies. Suitable for most sizes of the press-fit watch repair and battery replacement use.
  • Equipped with a cleaning cloth, put it between the watch glass surface and the mold before pressing to avoid scratching the glass.
  • 【Simple Operation】: 1. Select the appropriate size mold (please check the details page below for the specific selection method). 2. Place the mold and the watch in order, adjust the upper and lower balance, and ensure that there is no offset. 3. Slowly turn the rotary handle of the watch press tool and press the back cover of ....
Check Stock

MEOZEL Watch Press Tool, Watch Press Set Back Case Closer, Watch Repair Kit with Press, Watch Press Tool with 12 Addition Dies, Blue, (ME-05)

  • [Premium Quality Metal Watch Press Set] The press is of metal construction and the durable designed ABS plastic dies with a metal screw in the middle , it won't scratch your watch. The arm of the press is spring loaded, which keeps the press in the open position. The spring is very nice and does not require too much pressure to close it..
  • [Well Made Product Watch Kit] This watch back press tool with 12 dies double size to allow for 50/48mm 46/44mm 42/40mm 38/36mm 34/33mm 32/31mm 30/28mm 26/24mm 23/21mm 20/18mm. The various sizes make it easy to find the right ones..
  • [Make repairs simple] Easy three steps to use this watch press set - choose two suitable dies, screw them on the watch press tool, and then press down the handle..
  • [Perfect match with Different Watch Back Case Size] The fixed seat is used to fix the watch, the watch press set opens the watch back, replace the watch battery with tweezers or other repairs, and then press the kit with a watch case closer on the watch back..
Check Stock

BYNIIUR 19 Pcs Watch Press Set, Watch Repair kit with 18mm-50mm Fitting Dies for Watch Back Case Remover Closer, and Battery Replacement

  • Package Included: 12 pieces assorted dies, one watch case holder , one adjustable watch back remover tool, one watch back opening tool knife, tweezers, one piece cleaning cloth,6 finger coats and detailed instructions..
  • High Quality Watch Repair Kit: The watch press is made of cast metal to ensure strength, the arm of the press is spring loaded it keeps the press in the open position.The dies are made of ABS plastic, which will not scratch the watch or mar crystals..
  • Different Size Dies to Fit Your Watch: 12 assorted dies suitable for the watch sizes from 50/48mm 46/44mm 42/40mm 38/36mm 34/33mm 32/31mm 30/28mm 26/24mm 23/21mm 20/18mm..
  • Watch Back Case Remover Tool: Come with adjustable watch back case removal opener, its tempered tips can be adjusted from 13 mm to 56 mm, you just simply placing the blade under the case back and pry it off easily..
  • Come with instruction for easily use: BYNIIUR Watch Press comes with a detailed manual that will guide you how to use these tools. If you are still confused, please feel free to contact BYNIIUR for help, we will offer you resolutions with....
Check Stock

Snaps Rivet Grommet Prong Eyelet Popper Fastener Self Cover Fabric Button Hand Press Machine Set

  • [Handpress Machine] Universal Hand Press Machine for grommets, snap buttons, rivets, fabric covered buttons.
  • [Snap Button Dies] 1 set of die for 10 mm 'S' spring press fasteners type VT2 (includes 4 pieces) 1 set of die for 12,5 mm 'S' spring press fasteners type T54 (includes 4 pieces) 1 set of die for 15 mm 'S' spring press fasteners type Alfa (includes 4 pieces) 1 set of 9.5mm Perforated prong snap button fastener button tool/die (includes 2 pieces).
  • [Rivet Dies] 1 set of 7mm Rivet Die/Mold (includes 2 pieces) 1 set of 9mm Rivet Die/Mold (includes 2 pieces).
  • [Grommet Eyelets Dies] 1 set of 5.4mm Grommet/Eyelet Die/Mold (includes 2 pieces) 1 set of 7.5mm Grommet/Eyelet Die/Mold (includes 2 pieces) 1 set of 9mm Inner Diameter Grommet/Eyelet Die/Mold (includes 2 pieces).
  • [Hole Puncher] 1 piece 2mm Hole Puncher 1 piece 4mm Hole Puncher 1 piece brass base for a hole cutter.
Check Stock

Forster Co-Ax Single Stage Press LS Shellholder Jaws

  • Full-Length Sizing Die (with elevated expander button).
  • Elevated expander button allows better alignment of case and neck..
  • If using Forster Dies in a Forster Co-Ax press shellholders are not required since Forster presses d.
  • If using Forster Dies in any non-Forster press use shellholders that are recommended by the press ma.
Check Stock

TGR Professional Brake Line Flaring Tool- 45 and 37 Degree Set Single and Double Flares

  • Quickly create single or double flares on 4 different sizes of tubing. Great for making perfect flares on brake lines, transmission cooler lines and....
  • Includes dies for 3/16”, 1/4”, 5/16”, 3/8” tubing..
  • Easy operation. Creates Single Flares and Double Flares.
  • Kit includes dies for both 45 and 37 degree flares.
Check Stock