Best Power Transmission Oil

Mryok Polarized Replacement Lenses for Oakley Si Ballistic Shocktube - Fire Red

The ultimate racing transmission oil for Honda CR, CRD and TRX models.
Ultra-high film strength and shear stability reduces transmission wear.
High thermal stability prevents foaming and premature oil breakdown.
Anti-friction additives allow smoother shifting, while minimizing drag and power loss.
Anti-shear additives increase clutch life reduce clutch slippage.

Check Stock

Tru-Cool Max LPD4739 4739 40,000 GVW Low Pressure Drop Transmission Oil Cooler with Thermal Bypass

PROTECTION - When an auxiliary transmission oil cooler is required for your vehicle, Tru-Cool Max delivers optimal protection with double the cooling....
RELIABLE - Durable brazed aluminum construction with a lifetime guarantee.
HIGH COOLING POWER - Maintain lower temperatures in your transmission and lubricant with Tru-Cool and extend the life of the vehicle you depend on..
PERFORMANCE RATED - Drive hard. Rest easy. Get the OE advantage that comes from a Tru-Cool LPD transmission oil cooler plus the proven cooling that....

Check Stock

OEMTOOLS 24937 1.5 Gallon 6 Liter Pneumatic and Manual Fluid Extractor Manual and Pneumatic Oil Extractor Fluid Vacuum Extractor Vacuum Evacuator

Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid....
Double Duty: For pneumatic extraction, insert the suction hose in the engine oil extractor receiving hole.
Manually suction fluid with the engine oil....
Don’t Cry Over Spilled Oil: The 1.5 gallon reservoir is a solid one-piece tank that can't leak out the bottom.
Time Flies: Draining oil from beneath a vehicle takes eons.
The oil pump extractor's 5 foot hose and dipstick adapter extracts automotive fluid....
Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
This fluid extractor pump works at 85 PSI and a max....

Check Stock

EWK 6.5L Manual Oil Extractor Pump Vacuum Oil Changer for Automobile Fluids Evacuation

【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
【 Easy Operation 】 The manual fluid evacuator requires no other equipment to use with. With a good number of strokes on the sturdy handle, the pump will create vacuum that triggers a powerful suction to help you change oil efficiently..
【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..

Check Stock

OEMTOOLS 24938 9.5L Pneumatic/Manual Fluid Extractor, Manual and Pneumatic Oil Extractor, Fluid Vacuum Extractor, Vacuum Evacuator

Carefree Car and Boat Care: Easily remove engine oil, transmission fluid, power steering fluid, gear oil, coolant, and more with this versatile fluid evacuator pump.
Double Duty: For pneumatic extraction, insert the suction hose in the vacuum extractor pump receiving hole.
Manually suction fluid with the engine oil pump's oversized handle.
Don’t Cry Over Spilled Oil: The 9.5-gallon reservoir is a solid one-piece tank that can't leak out the bottom.
The built-in shutoff prevents overfilling the extractor pump reservoir.
Time Flies: Draining oil from beneath a vehicle takes eons.
The fluid pump's 5ft hose and dipstick adapter extracts automotive fluid directly from the dipstick tube.
Under Pressure: Change transmission fluid anytime with the pneumatic and manual pumping options.
This fluid extractor pump works at 85 PSI and a max pressure of 120 PSI.

Check Stock

Crestware OPL04 4 oz Stainless Steel One Piece Ladle

Applications: Trans fluid, power steering fluid and sas/oil additives and water..
Use for car oil changes, gas additives, transmission fluids, power steering and more..

Check Stock

EWK Patented 10.5L Pneumatic/Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation

【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport..
【 Dual-Purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The manual mode requires no other equipment to use, while the pneumatic mode turns the pump into a high-speed oil changer. (Suction speed: 1.8L/min.).
【 No Oil Left 】 The vacuum oil changer comes with 2 sizes of upgraded extra-long tubes with different diameter. Slide it as far as possible to reach the very bottom of your reservoir and suck up every drop of oil..
【 Wide Application 】Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor..
【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistanc....

Check Stock

ABN Silicone Heater Pad Car Battery Heater Pad Engine Block Heater Pad Oil Pan Heater Pad, 4x5 Inch – 120V 250 Watt

...l quickly up to 194 degrees Fahrenheit (90 C) for those cold start mornings.
IMPROVE OIL FLOW: Transmits heat (to a built-in maximum temperature of 194 F / 90 C) to keep engine oil as a thin fluid, giving you instant lubrication when starting your engine.
Increases engine longevity and extends transmission life.
EASY TO INSTALL: Clean application surface, peel off paper backing to adhesively attach 4-inch x 5-inch (10.2cm x 12.7cm) pad to outside of clean oil pan or other metal surface, then plug the 5.75-foot (1.8m) 2-prong power cord into any wall outlet for instant warming.
Once applied, the stick on oil pan heater remains permanently installed on any metal surface (seal edges for longer adherence.
BUILT TO LAST: Flexible heating pad is rated at 120 Volts and 250 Watts.
Constructed with silicone coat covering for oil resistance, acid resistance, and added strength and longevity.
Power cord stays attached : not removable.
FOR AUTO WARMING: 250-watt car engine heater pad designed to heat fluids with any metal surface such as engine oil pan, fuel tank, reservoir, transmission pan, and more.
For metal surfaces only : Keep away from plastics.
Caution : Extremely hot, built-in automatic thermostat (not programab....

Check Stock

Lisle 38780 22' Square No-Splatter Pad

22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
Porous material allows fluid to quickly pass through into funnel or pan..
Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..

Check Stock