Best Power Supply Linear Regulated

9V DC 1.7A 1700mA Center Negative Regulated Power Supply Adapter with Noise Reduction Filtering for 9 volt Guitar Effects Pedals + 5 Way Daisy Chain

  • [HIGHEST POWERED REGULATED 9V GUITAR PEDAL POWER SUPPLY AVAILABLE] - 9V DC, 1700mA 1.7A regulated output. Truly the highest powered 9V power supply on....
  • [FITS INDUSTRY STANDARD GUITAR PEDALS] - tip/center-negative, 5.5 mm O.D, 2.1 mm I.D., 9.5 mm L barrel connector. Whether you need power for a....
  • [EXTENDED LENGTH CABLE] - 6.5 foot 22 AWG cable. No more extension cords and messy stages. One 9V 1700mA power supply with 6.5' length will work for....
  • [POWER MULTIPLE PEDALS] - with the optional 5 way daisy chain power supply you can safely and quietly power up to 5 of your favorite 9v pedals at....
  • [ULTRA LOW NOISE] - ferrite magnetic ring significantly reduces noise caused by facility power constraints. Coda Music Technologies guitar pedal power....
Check Stock

AITRIP 2PCS Type-C USB CH340 5V 16MHz for Nano Board CH340/ATmega+328P , Type-C Connection Compatible with Arduino Nano V3.0

  • The Nano can be powered via the Type-C USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • Support for external 5V~12V DC power supply, Support power supply by 9V battery..
  • The Nano is using the chips ATmega328P and CH340, Replace FT232RL.
  • The Nano-C is breadboard-friendly and can be powered by USB, regulated 5V supply or unregulated 7-12V source. Connectors shipped unsoldered to fit the smallest of spaces.
  • Comes with 2packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed..
Check Stock

WindyNation 2pcs 12 Volt 225 lbs Linear Actuators + Wireless Remote Control DPDT Switch + Actuator Mounting Brackets + Wiring & Connectors

  • Includes 2pcs of 12V, 225 lbs Linear Actuators (multiple stroke lengths available) with Mounting Brackets, Remote Control Unit, and Wire with Locking....
  • No power supply is included. This option is ideal for customers who already have their own power supply (e.g. 12 volt car battery ).
  • See photo gallery for linear actuator specifications and a wiring schematic for the entire system. Extremely easy to wire and assemble using the....
  • Remote Specs: CURRENT RATING: 5 amps REMOTE RANGE: 90ft maximum FREQUENCY: 433.92 Mhz OPERATING VOLTAGE: 10-30 vdc (suitable for 12 and 24 volt....
  • Complete kit allows end user to remotely control the movement of their linear actuators. (Power supply is NOT included. Other variations in this....
Check Stock

YIHUA 8786D-I Soldering & Rework Station bundle with YIHUA 305D-IV Regulated DC Lab Power Supply with Holder, Soldering Cleaning Kit, and Accessories (25 Items)

  • The bundle includes: The 8786D-I Micro-Soldering & Rework Station (Essential accessories included) with 305D-IV Regulated DC Lab Power Supply to provide variable regulated power output for your projects.
  • The 8786D-I station essential accessories include: 1 x 50g 0.8mm LEAD-FREE solder wire, 10 x assorted iron tips, 4 x assorted hot air nozzles, 1 x solder wick, 1 x solder sucker, 1 x IC extractor, 1 x grounding wire.
  • The 8786D-I micro-soldering & rework station: Hot air temperature from 212-896°F, soldering station temperature from 392-896°F. Both the soldering and hot air station has temperature stabilization function to keep your iron at the set temperature steadily for your work..
  • The 305D-IV Regulated DC Lab Power Supply: You can adjust the regulated power output from 0-5A, 0-30V for your work. The unit comes with automatic Constant Voltage & Constant Current mode, short-circuit protection and overcurrent protection to protect the device at work..
  • Quality Assurance: Because you buy directly from the manufacturer, you can enjoy 1-year quality assurance on all our soldering iron/station & rework stations/portable hot air guns. (*consumable product such as soldering iron tips are not covered by the warranty) On top of that, you'll also gain access to ....
Check Stock

YIHUA 862BD+ Professional Soldering & Rework Station bundle with YIHUA 305D-IV Regulated DC Lab Power Supply with Holder, Soldering Cleaning Kit, and Accessories (22 Items)

  • The bundle includes: The 862BD+ Professional Soldering & Rework Station (Essential accessories included) with 305D-IV Regulated DC Lab Power Supply to provide variable regulated power output for your projects.
  • The 862BD+ station essential accessories include: 1 x 50g 0.8mm LEAD-FREE solder wire, 5 x assorted iron tips, 4 x assorted hot air nozzles, 1 x cleaning sponge, 1 x pair ESD-safe tweezers, 1 x solder sucker, 2 x holders, 1 x cleaning kit (brass ball & rosin), 1 x IC extractor.
  • The 862BD+ 2-in-1 professional soldering & rework station: Hot air temperature from 212-896°F, soldering station temperature from 392-896°F. Both the soldering and hot air station has temperature stabilization function to keep your iron at the set temperature steadily for your work.
  • The 305D-IV Regulated DC Lab Power Supply: You can adjust the regulated power output from 0-5A, 0-30V for your work. The unit comes with automatic Constant Voltage & Constant Current mode, short-circuit protection and overcurrent protection to protect the device at work..
  • Quality Assurance: Because you buy directly from the manufacturer, you can enjoy 1-year quality assurance on all our soldering iron/station & rework stations/portable hot air guns. (*consumable product such as soldering iron t....
Check Stock

Programmable DC Power Supply (0-30 V 0-10 A) HM310T High Precision 4-Digit Voltage Current Power Time Display Variable Switching Digital Power Supply with PC Software and USB Interface

  • [Programmable DC Power Supply]: This programmable DC power supply has a standard USB interface on the back and supports the Modbus programming instruction set. Hardware list With programmable sequence output. Six groups of quick parameter storage features..
  • [High accuracy]: The HANMATEK variable DC regulated power supply can display the output current, voltage, and power in 4 digits. At the same time, the time can be displayed and the decimal point is automatically rounded up. Output voltage: 0-30V, output current: 10A. Voltage resolution: 10mv.
  • [Reliability and Safety]: This variable DC regulated power supply has five powerful functions: overvoltage protection (OUP), overcurrent protection (OCP), overpower protection (OPP), overheat protection (OTP), and short-circuit protection. It has a protective function. With the automatic temperature control cooling fan, the cooling fan turns on automatically when the operating temperature exceeds 45 ° C..
  • [Multi-function]: Front 5V 1.5A dual USB charging interface that can be charged and repaired. The one-key output on / off switch allows you to preset the voltage and current values ​​when the output is off, which is convenient for operation. One key for the voltage stabilization a....
Check Stock

WindyNation Linear Actuator or DC Motor Power Supply + DPDT Wireless Remote Control Switch + Double Adapter Cable

  • Includes Power Supply, Remote Control Unit, Double Adapter Cable (for connecting two linear actuators or DC motors), and additional Connection Cables.
  • Can wirelessly control two 12 volt DC Motors or two linear actuators (5 amps maximum). The remote control is a DPDT switch (Examples: Up-Stop-Down or....
  • Power Supply Specs: AC INPUT RANGE: 100-240 VAC DC OUTOUT: 12 VDC (5 amps maximum) ADDITIONAL INFO: 8ft AC extension cord included and 5ft DC....
  • Remote Specs: POWER RATING: 5 amps REMOTE RANGE: 90ft maximum FREQUENCY: 433.92 Mhz OPERATING CURRENT: 15mA SWITCH TYPE: DPDT ON-OFF-ON.
  • Simple Installation: The included connectors allow for a quick and simple installation of the power supply and remote receiver..
Check Stock

WindyNation 12 Volt 225 lbs Linear Actuator + AC to 12 VDC Power Supply + Wireless Remote Control DPDT Switch + Actuator Mounting Brackets

  • Includes 12V 225 lbs Linear Actuator (multiple stroke lengths available) with Mounting Brackets, AC to DC 12 Volt Power Supply, Remote Control Unit,....
  • See photo gallery for linear actuator technical specifications and a wiring schematic of the entire system. Extremely easy to wire and assemble using....
  • Power Supply Specs: AC INPUT RANGE: 100-240 VAC DC OUTOUT: 12 VDC (5 amps maximum) ADDITIONAL INFO: 8ft AC extension cord included and 5ft DC....
  • Remote Specs: POWER RATING: 5 amps REMOTE RANGE: 90ft maximum FREQUENCY: 433.92 Mhz OPERATING CURRENT: 15mA SWITCH TYPE: DPDT ON-OFF-ON.
  • Complete kit allows end user to remotely control the movement of their linear actuator(s)..
Check Stock

Pyramid PS9KX Universal Compact Bench Power Supply-5 Amp Linear Regulated Home Lab Benchtop Converter w/ 13.8 Volt DC 115V AC 70 Watt Input Screw Type Terminal 12V Car Cigarette Lighter

  • converts ac to dc: the pyramid bench power supply features linear/regulated design. provides convenient and reliable ac-to-dc power conversion (12v dc) w/ constant source of dc voltage. works w/ cellular phones, cb radio, scanner, ham radio, and etc.
  • screw-type terminals: the features universal hardwired screw-type connection terminals that ensure compatibility with a wide range of devices, equipment, and components. that used for component and device equipment testing, operation and performance.
  • plug-in operation: the simple plug-in operation provides a constant source of dc voltage, allowing for quick and consistent power conversion. this switch-activated power control eliminates the need for an external battery or additional power sources.
  • short-circuit protection: equipped w/ built-in electronic overload & short circuit protection to ensure the safety of the operator & any connected electrical device. also, fuse protected w/ auto reset. perfectly safe for tabletop or desktop placement.
  • built-in cooling fan: this power converter features a cabinet heatsink and a built-in cooling fan to prevent the device from overheating. the constant amperage is 5a and the surge is 7a w/ power output of 13.8v dc and has 115v ac 60hz 70w power input.
Check Stock