Best Power Steering Shocks

Redcat Racing Lightning STK Electric Car Blue 1/10 Scale

  • 1/10 scale on road race car, Shaft driven 4 wheel drive, Independent suspension, Lightweight plastic chassis w/ aluminum top plate, Oil filled shocks,....
  • Tunable suspension, Adjustable ride height, Adjustable toe angle, Adjustable camber angle, Tunable shocks, Selectable shock positions, Tunable gear....
  • Detailed Stock Car body, Molded plastic rear wing, Realistic tires w/ high speed dish wheels.
  • 19T RC550 brushed electric motor, 40a Waterproof ESC, Precision steering servo, 2.4GHz radio system..
Check Stock

Redcat Racing Volcano EPX Electric Truck Blue/Silver 1/10 Scale

  • 4WD Monster truck w/ Large monster truck tires, Lightweight molded plastic chassis, (8) Aluminum capped oil filled shocks, front and rear gear....
  • Tunable suspension, Adjustable ride height, Tunable shocks, Tunable gear differentials, Adjustable camber, Adjustable toe angle. Speed Control: 40a....
  • Aggressive tires, Independent suspension, Low center of gravity chassis for high speed performance, Ball bearings throughout..
  • 19T brushed 550 electric motor with heat sink, Waterproof ESC, Waterproof high torque steering servo, 2.4GHz radio system..
Check Stock

Team Associated 1/28 DR28 Drag Race Car RTR Ready to Run 2 Wheel Drive ASC20160

  • New 13mm big-bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling.
  • New +3mm length aluminum chassis with 22.5 degree kick-up to complement updated front-end geometry and with new shape to reduce chassis scrub with the track surface.
  • 20deg., 22.5deg., and 25deg. molded bulkheads included for a complete range of caster and kickup options.
  • New adjustable height steering bellcrank and rack system for optimized bumpsteer at all ride heights and caster angles.
  • New -1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw.
Check Stock

Rancho Quicklift Leveling Strut+Shocks Kit compatible with 2007-2013 Silverado/Sierra 1500 2WD/4WD

  • Front Pair of Struts & Springs + Rear Pair of Shocks - compatible with 2WD & 4WD Vehicles at factory height or 0-2" Front Lift and 0-1" Rear Lift Excl. Electronic Suspension, 4 Wheel Steering, ZW7 Self-Leveling Nivomat Suspension.
  • Front height not adjustable from specified height. 9 settings of compression and dampening adjustment. Shock boots included with RS9000XL shocks..
  • Twin tube nitrogen gas charged design with 9 settings of compression dampening adjustment..
  • All necessary washers, bushings, and nuts included. Factory shock mounting bolts are reused for installation..
  • Rancho's limited lifetime warranty protects against defects and premature failure. Rancho's limited lifetime warranty protects against defects and premature failure. RS9000XL series shocks include a 90-day ride guarantee..
Check Stock

Axial RC Truck 1/10 Capra 1.9 4WS Unlimited Trail Buggy RTR Batteries and Charger Not Included Black AXI03022T2

  • Includes front and rear steering out of the box for the ultimate in precise maneuverability.
  • Currie F9 Portal Axles offer over 45% of steering with extra ground clearance for the best crawling performance.
  • Adjustable oil-filled shocks feature hard anodized, threaded shock bodies and a single coilover spring.
  • Metal universal joints on both axles provide smooth action and 45 degrees of steering for an efficient, high-performance drivetrain.
  • Nitto Trail Grappler 1.9 tires are mounted on injection-molded, 3-piece, licensed Raceline beadlock wheels.
Check Stock

Axial RC Truck 1/10 Capra 1.9 4WS Unlimited Trail Buggy RTR Batteries and Charger Not Included Red AXI03022T1

  • Includes front and rear steering out of the box for the ultimate in precise maneuverability.
  • Currie F9 Portal Axles offer over 45% of steering with extra ground clearance for the best crawling performance.
  • Adjustable oil-filled shocks feature hard anodized, threaded shock bodies and a single coilover spring.
  • Metal universal joints on both axles provide smooth action and 45 degrees of steering for an efficient, high-performance drivetrain.
  • Nitto Trail Grappler 1.9 tires are mounted on injection-molded, 3-piece, licensed Raceline beadlock wheels.
Check Stock

Power Steering Pump Fit For 2003 2004 2005 Honda Accord 2.4L Power Assist Pump Replace # 56110-RAA-A01 56110RAAA03 96-5341 5776 990-0656 PSP1006 21-5341

  • High QualityThe power steering pump is exact OE manufactured and can be replaced directly with the original parts in your vehicle. It is made of high quality material and maintain a good strength to give the parts long time performance. It can be installed easily without using complicated tools..
  • FunctionThe power steering pump is used to converting power to the power steering fluid from the reservoir into the steering gear and keeps the wheels running in good conditions. Once you noticed that your vehicle wheels runs unsmoothly, steering wheel slow to respond, stiff steering wheel and make loud noise, then you need to double check the power steering pump and get it replaced if it is defective..
  • CompatibilityThis power steering pump fits for 2003 2004 2005 Honda Accord 2.4L. And please double check the fitment on the above fitment bar or on the following products description..
  • Replace OE Part# 215341, 965341, 56110RAAA01, 56110RAAA03, 990-0656, PSP1006. This power steering pump will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine part..
  • WarrantyThis power steering pump comes with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. If you don't like it, just return it and get a full refund. All we wa....
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock