Best Power Pcb Board

SFB-7900D - Sundown Audio Monoblock Class-D Amplifier

  • Features: Double-sided SMT Epoxy PCB. Power Handling: 200 x 1 at 4-ohm | 350 x 1 at 2-ohm | 500 x 1 at 1-ohm. Painted Conformal Coating PCB Board, 1-Ohm Stable Circuit, Efficiency: 86% 4-Ohm at 100Hz, 12dB/Oct Variable Crossover Slope, Multi-way Protection Circuitry (Thermal/Over Current/Speaker Short/Speaker DC Protection), Input Sensitivity: 15V-0.5V, Variable Bass Boost: 0-9dB, Variable Low Pass Filter: 35Hz-160Hz, 10 Gauge Power Supply Connectors, Signal to Noise Ratio: >90dB, Damping Factor.
Check Stock

Dashtop 40 pcs L Type PCB Mounting feet / legs with Screw Fit for Arcade Games Jamma Game Video Games Windows System Raspberry Pi Board

  • MATERIAL: PCB standoffs are made of insulating plastics, strong and durable in use..
  • SIZE: The size of insulated PCB spacer – 20 x 20 x 9mm / 0.8 x 0.8 x 0.35in (LxWxH). Supporting Height: 20mm / 0.8 inch.
  • TWO SCREWS HOLES: Each L type PCB board mounting feet comes with 2 screws to secure the circuit board to other surfaces easily.
  • APPLICATIONS: Circuit Board Standoffs suit for game console motherboard, video board, and so on, serve as ideal replacement parts and provide you much....
  • Apply for: our L type PCB board mounting feet with screws fit well with arcade gaming board, video board and so on, serve as ideal replacement parts....
Check Stock

Aeronautical Receptor Kits, Aeronautical Receptor High Sensitivity Squelch Function for Aircraft and Tower Calls

  • The kit uses a band-pass filter, 3355 high-amplifier, NE602 mixing, MC1350 mid-amplifier solution, which can receive AM signals of 118-136MHz..
  • Directly printing inductor traces on the PCB board greatly simplifies the difficulty of assembly..
  • The AGC circuit on the board ensures comfortable listening, while the squelch function avoids long-term noise..
  • 12V power supply, 9.2 x 7.5cm PCB board size, which can be directly used in 97 x 40 x 75mm aluminum chassis.
  • It is specially used to receive the call between the aircraft and the tower. With the antenna with good performance (VHF band Yagi antenna), the open area can receive various types of aircraft and tower calls within about 190Km. Please pay attention to your favorite friends..
Check Stock

Yellow Sanwa LB35 Balltop for JLF Joysticks

  • Original Sanwa Denshi TP-MA Replacement PCB with Microswitches.
  • Replacement microswitch PCB for Sanwa JLF series Joysticks.
  • Often the PCB is the first to go out on a Sanwa JLF in a few years. Restore it to brand new by getting the Sawa TP-MA PCB assembly. This replaces the entire set of microswitches and PCB, and housed in very easy to install module..
  • Installation: Remove the Sanwa JLF lever restricted Remove the TP-MA board that comes from the Sanwa JLF lever Place the new board pointing in the same direction as the previous one. Finally place the restrict again.
  • Package include One pcs Original Sanwa TP-MA PCB with Microswitch.
Check Stock

Samsung DA94-02663A Main Control Board

  • The Samsung DA94-02663A Main Control Board is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications.
  • Replacement Samsung Refrigerator Main Control Board is a PCBA (Printed Circuit Board Assembly) manages the functions of the refrigerator such as....
  • Samsung DA94-02663A Refrigerator Main Control Board is also called the Electronic Control Board or Main PCB (Power Control Board).
  • High quality Samsung OEM DA94-02663A Refrigerator Main Control Board is manufactured with premium materials for durability and exact fit, be sure to....
  • Repair your appliance with confidence when you choose Genuine Samsung Factory Parts & Accessories.
Check Stock

Dorhea ESP8266 ESP-12 NodeMcu D1 Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board + Relay Shield + 2.54mm 40Pin Single Row Male Pin Header - 3Set

  • The esp8266 module is 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
  • 1 analog input(3.2V max input). Micro USB connection.
  • WiFi internet development board 5V 1A switching power supply (switching power supply）onboard..
  • 5V relay shield is a digital switch to control much higher voltages and currents than esp8266 mini microcontroller, controlled by the D1 , the relay will switch to allow current to flow or turn off, depending on wiring..
  • 40 pin 0.1inch (2.54mm) male pin header connector PCB board pin strip electronic component, they are easy to be cut to any length if needed, you can cut or score with some electronic tool..
  • The pin header is an ideal connector for the PCB board and intergrated circuit, used widely in the computer and breadboard, compatible with raspberry pi or other electronic project..
Check Stock

Aeronautical Receiver, Squelch Function Electrical Aeronautical Receptor Kits for Aircraft and Tower Calls for 97 X 40 X 75mm Aluminum Chassis

  • The kit uses a band-pass filter, 3355 high-amplifier, NE602 mixing, MC1350 mid-amplifier solution, which can receive AM signals of 118-136MHz..
  • Directly printing inductor traces on the PCB board greatly simplifies the difficulty of assembly..
  • The AGC circuit on the board ensures comfortable listening, while the squelch function avoids long-term noise..
  • 12V power supply, 9.2 x 7.5cm PCB board size, which can be directly used in 97 x 40 x 75mm aluminum chassis.
  • It is specially used to receive the call between the aircraft and the tower. With the antenna with good performance (VHF band Yagi antenna), the open area can receive various types of aircraft and tower calls within about 190Km. Please pay attention to your favorite friends..
Check Stock

Pieces 4 Pin LED Light Strip Connectors Set Including Screw Fixing Clips, 4 Pin LED Connectors, Cuttable T, L and X Shape PCB Board for SMD 5050 RGB LED Strip Lights Gapless Solderless Connector

  • ... stand up to 4A current and 0 - 24V (5V, 12V, 24V) voltage, the heat resistance level is -20℃ - 100℃, so they are suitable for most non-waterproof 4 pin SMD 5050 RGB lights in 0.39 inch/ 10 mm width.
  • Note: you should pay attention to use them correctly for ensuring safety and extending service life.
  • Cuttable PCB board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips.
  • Just use your imagination to DIY a special light strip.
  • Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board.
  • Simple to install: the LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector + - polarity in line with + of strip before you connect it.
  • Wide range of usages: the 5050 LED strip connectors are suitable for standard density strips or DIY LED lights, for corner connection, and able to decorate Christmas trees, parties, birthdays, weddings, parties and other scenes according to your own needs.
  • Sufficient quantity: the package comes with 40 pieces 4 pin LED connectors, 15 pieces L-shaped PC....
Check Stock

AmScope - Adjustable Circuit Board Holder and Clamping Kit PCB Holder Frame - Single Pack - 1 Piece

  • Adjustable printed circuit board holder (PCB) holds objects in place for soldering, repair or inspection functions.
  • Wide base with rubber feet creates a solid and safe work platform.
  • Spring-loaded clamp holds objects up to 7 ¾” wide (198 mm) securely in place.
Check Stock