Best Power Of Motor 22kw

Electrodepot 40 Amp 12 Pole (4 Pole x 3) Normally Open, 110-120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with 8\ DIN Rail and 2 Number 10 Screws

BUNDLE CONTENT: 6 ITEMS – Three (3) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
one (1) compatible Slotted Steel Zinc Plated 35mm x 200mm DIN Rail and two (2) stainless steel truss head screws (#10, 1/2") for immediate home or industrial installation.
CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specificat....

Check Stock

Electrodepot 40 Amp 8 Pole (4 Pole x 2) Normally Open, 110/120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with DIN Rail, 35 x 150 mm and 2#10 Screws

BUNDLE CONTENT: 5 ITEMS – Two (2) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
one (1) compatible Slotted Steel Zinc Plated 35mm x 150mm DIN Rail and two (2) stainless steel truss head screws (#10, 1/2") for immediate home or industrial installation.
CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specificatio....

Check Stock

Outdoor Hand Held Gas Power Broom, 52cc Gasoline Power Broom Walk Behind Sweeper Cleaning Driveway Tools High Performance Cleaner 2.3HP 1.8M (US Stock)

【Power Broom Parameter】Displacement: 52cc 2-Stroke.
Overall Length: About 1.8m（70.87 in）..
【Professional Cleaning Ability】The brush head of this power broom is made of high-quality nylon material, which is suitable for cleaning light debris on hard surfaces. The dense nylon bristles make it easy to restore your golf course to a clean and tidy state..
【Strong & Durable】The motor of this nylon brush sweeping broom adopts an air-cooled motor engine, and the brush head is made of nylon material, which is tough, wear-resistant, and corrosion-resistant, extending the service life of the broom..
【Easy to Operate】The total length of this hand held broom is 1.8 meters, so it can be used with people of different heights. Moreover, the broom is equipped with a curved handle, which makes it easier and more convenient for you to operate.The lightweight and detachable structure of this broom make it easy to carry..
【Time & Effort Saving】The sweeper's motor drive saves time and effort. The broom is powe....

Check Stock

MXBAOHENG Pneumatic Paint Mixer 13-66 Gallon 2500RPM Pneumatic Mixer Portable Industrial Ink Coating Mixing Tool Machine, with 4-INCH Galvanized Impeller

【Main Parameters】Power: 500W, Speed range: 2500RPM, Intake port: 1/4PT. The pneumatic paint mixer needs to be used together with air compressor. Suitable for Air compressor: power: above 3kw, working pressure: above 7kg/cm² (99.56PSI)..
【High Quality】This handheld pneumatic mixer has high-quality stirring rod and stirring blade.
The mixing rod is corrosion-resistant, does not fade, and is easy to clean. The length of the stirring rod is 58CM/22.83inch, which can fully stir the pigment deposited at the bottom of the container.
the stirring impeller is corrosion resistant, acid and alkali resistant, removable, etc..
【Heat Dissipation Function】This pneumatic paint mixer with porous design helps exhaust air and effectively protects internal working parts. The air intake from the air inlet drives the rotation of the fan blades to provide power for the machine, and then exits through the vent hole..
【Cylinder Motor】This pneumatic mixer is equipped with a cylinder motor, powerful, low noise and high efficiency. The motor speed is adjusted by the rotary switch. The higher the air pressure, the faster the speed. Can work in harsh environment, such as inflammable and explosive, dust, heavy load, humid workplaces, etc..

Check Stock

Electrodepot 40 Amp 4 Pole Normally Closed Contactor, 110-120V Coil, Motor Load 20A, Lighting 40A Bundle with Slotted Steel Zinc Plated DIN Rail, 35 mm x 6 in – 1 Piece with 2 Number 10 Screws

...7 V, with an energy saving, silent and no humming coil.
COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
Coil load Inrush 30VA, Sealed 4VA. Inductive/Motor Load: 20Amp, Resistive/Incandescent Load: 40Amp. DC Load: 30Amp @ 24VDC. Compatible with 20 Amp, 30 Amp, 32 Amp and 40 Amp loads. Power Lug Terminal Capacity AWG # 4.
OTHER CONTACTOR DETAILS – Contactor type NC with 4 poles, power status indicator. IEC AC Rate: AC-1.
8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 85 x 45 x 92 mm / 3.4'' x 1.7'' x 3.6'' (Length x Width x Height).
DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 152.40mm (6”) and thickness 5mm (0.2”).

Check Stock

Coleman - 40 Amp 1 Pole 24v Coil Replacement Contactor C140A

BUNDLE CONTENT: 5 ITEMS – Two (2) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
one (1) compatible Slotted Steel Zinc Plated....
CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp,....
OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European....

Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

...t: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the machine Avoid the spindle burn out Can engrave the high hardness or metal.
DESCRIPTIONS】Industrial fit for engraving machine controller was designed system Waterproof design, very....

Check Stock

Single Cylinder Two Stroke Gasoline Toothless Saw 12 Inch Cutting Machine, 4.5kw Power Cutting Machine Concrete Cutting Machine Cutting Tools

⚙️【PRODUCT SPECIFICATION】Material: Aluminum Alloy Box, Steel Protective Cover.
⚙️【WIDE APPLICATION】 The Gas Power Cutter are used in fire fighting, municipal construction work, road and bridge construction and other motor and field work.
⚙️【POWERFUL CUTTER】With 4.5kw Power, our Powerful all-around power cutter is ideal for cutting concrete and masonry in alteration, renovation and new construction work.
⚙️【COMFORTABLE DESIGN】The features a compact design, low weight & correctly positioned handles to make the machine easier to handle. The comfortable handles provides more comfortable handling during long work shifts.
hold with both hands to effectively reduce vibration.
⚙️【HIGH EFFICIENCY】This compact and efficient tool is powered by a 95 cc engine with a full 4.5kw for the most demanding concrete cutting.
The Power Cutting Machine is lightweight with superior power-to-weight ratio with exceptionally low vibrations mean less strain and maximized productivity.

Check Stock

Fisher Space Pen - Non-Reflective Military Matte Black M4B- Cap-O-Matic - Gift Boxed

12 Volt DC Motor, input power 7. 7hp (5. 6kw) 24 Volt DC, input power 7. 7hp (5. 6kw).
Fully sealed with bolt pattern 11. 48" X 8" (164. 6 mm X 291. 6 mm) - Long Drum 8 bolts, 5/8"-11.
Steel Cable 1/2″ X 75′ (12. 7 mm X 24m).

Check Stock